SPI NAND chips may support octal "read from cache" and "program load"
transfers. List the opcodes by defining the relevant macros describing
these operations.

However, due to the hardware available I had, 0x82 and 0xc2 are
untested and given as reference, only 0xc4 could be (successfully)
tested.

Controllers supporting operations mixing SDR and DTR operations might
even leverage octal DTR data I/O transfers.

Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 include/linux/mtd/spinand.h | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index a29c9abb84a486cc428b3f33cebaccf3ddaf4b87..9be34b7a4deff988d96b2df1487f9353824fa23e 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -170,6 +170,27 @@
 		   SPI_MEM_DTR_OP_DATA_IN(len, buf, 4),			\
 		   SPI_MEM_OP_MAX_FREQ(freq))
 
+#define SPINAND_PAGE_READ_FROM_CACHE_1S_1S_8S_OP(addr, ndummy, buf, len, freq) \
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x8b, 1),				\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 8),			\
+		   SPI_MEM_OP_MAX_FREQ(freq))
+
+#define SPINAND_PAGE_READ_FROM_CACHE_1S_8S_8S_OP(addr, ndummy, buf, len, freq) \
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xcb, 1),				\
+		   SPI_MEM_OP_ADDR(2, addr, 8),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 8),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 8),			\
+		   SPI_MEM_OP_MAX_FREQ(freq))
+
+#define SPINAND_PAGE_READ_FROM_CACHE_1S_1D_8D_OP(addr, ndummy, buf, len, freq) \
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x9d, 1),				\
+		   SPI_MEM_DTR_OP_ADDR(2, addr, 1),			\
+		   SPI_MEM_DTR_OP_DUMMY(ndummy, 1),			\
+		   SPI_MEM_DTR_OP_DATA_IN(len, buf, 8),			\
+		   SPI_MEM_OP_MAX_FREQ(freq))
+
 #define SPINAND_PROG_EXEC_1S_1S_0_OP(addr)				\
 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1),				\
 		   SPI_MEM_OP_ADDR(3, addr, 1),				\
@@ -188,6 +209,18 @@
 		   SPI_MEM_OP_NO_DUMMY,					\
 		   SPI_MEM_OP_DATA_OUT(len, buf, 4))
 
+#define SPINAND_PROG_LOAD_1S_1S_8S_OP(addr, buf, len)			\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x82, 1),				\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(len, buf, 8))
+
+#define SPINAND_PROG_LOAD_1S_8S_8S_OP(reset, addr, buf, len)		\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0xc2 : 0xc4, 1),		\
+		   SPI_MEM_OP_ADDR(2, addr, 8),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(len, buf, 8))
+
 /**
  * Standard SPI NAND flash commands
  */

-- 
2.48.1