Add wake gpio which is needed to bring PCIe device state from D3cold to D0.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts   | 1 +
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 1 +
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi       | 1 +
 3 files changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index f54db6345b7af6f77bde496d4a07b857bf9d5f6e..ebfe2c5347be02ea730039e61401633fa49479d2 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -711,6 +711,7 @@ &mdss_edp_phy {
 
 &pcieport1 {
 	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
 };
 
 &pcie1 {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 60b3cf50ea1d61dd5e8b573b5f1c6faa1c291eee..d435db860625d52842bf8e92d6223f67343121db 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -477,6 +477,7 @@ &pcie1 {
 
 &pcieport1 {
 	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
 };
 
 &pm8350c_pwm {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 19910670fc3a74628e6def6b8faf2fa17991d576..e107ae0d62460d0d0909c7351c17b0b15f99a235 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -416,6 +416,7 @@ &lpass_va_macro {
 
 &pcieport1 {
 	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
 };
 
 &pcie1 {

-- 
2.34.1