[v2] i2c: npcm: Add clock toggle recovery

[PATCH v2 0/1] i2c: npcm: Add clock toggle recovery

mohammed.0.elbadry@gmail.com posted 1 patch 8 months, 3 weeks ago

Diff against v3 v4 v5 v5
Download series mbox

There is a newer version of this series

drivers/i2c/busses/i2c-npcm7xx.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

Expand all Fold all

[PATCH v2 0/1] i2c: npcm: Add clock toggle recovery

Posted by mohammed.0.elbadry@gmail.com 8 months, 3 weeks ago

From: Tali Perry <tali.perry1@gmail.com>

Hi,

During init of the bus, the module checks that the bus is idle.
If one of the lines are stuck try to toggle them first.

Fixes: 76487532f797 (i2c: npcm: Add slave enable/disable function)
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Mohammed Elbadry <mohammed.0.elbadry@gmail.com>
---

Tali Perry (1):
  i2c: npcm: Add clock toggle recovery

 drivers/i2c/busses/i2c-npcm7xx.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

-- 
2.34.1

Re: [PATCH v2 0/1] i2c: npcm: Add clock toggle recovery

Posted by Mukesh Kumar Savaliya 8 months, 3 weeks ago

On 3/25/2025 2:28 AM, mohammed.0.elbadry@gmail.com wrote:
> From: Tali Perry <tali.perry1@gmail.com>
> 
> Hi,
> 
> During init of the bus, the module checks that the bus is idle.
> If one of the lines are stuck try to toggle them first.
> 
As such there is one file change and single patch. You may go ahead 
without cover-letter. Just my thought.
> Fixes: 76487532f797 (i2c: npcm: Add slave enable/disable function)
> Signed-off-by: Tali Perry <tali.perry1@gmail.com>
> Signed-off-by: Mohammed Elbadry <mohammed.0.elbadry@gmail.com>
> ---
> 
> Tali Perry (1):
>    i2c: npcm: Add clock toggle recovery
> 
>   drivers/i2c/busses/i2c-npcm7xx.c | 12 ++++++++----
>   1 file changed, 8 insertions(+), 4 deletions(-)
>