The Qualcomm X Elite Devkit has 2 USB-A ports, both connected to the USB
multiport controller, each one via a separate NXP PTN3222 eUSB2-to-USB2
redriver to the eUSB2 PHY for High-Speed support, with a dedicated QMP
PHY for SuperSpeed support.

Describe each redriver and then enable each pair of PHYs and the
USB controller itself, in order to enable support for the 2 USB-A ports.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 86 ++++++++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
index 74911861a3bf2606add8cf4aaa3816542e837513..643ab2876222b00bfd60b74b20dd79f105a43143 100644
--- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
+++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -877,6 +877,40 @@ retimer_ss0_con_sbu_out: endpoint {
 	};
 };
 
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
 &i2c7 {
 	clock-frequency = <400000>;
 
@@ -1129,6 +1163,22 @@ wcd_tx: codec@0,3 {
 &tlmm {
 	gpio-reserved-ranges = <44 4>; /* SPI (TPM) */
 
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
 	nvme_reg_en: nvme-reg-en-state {
 		pins = "gpio18";
 		function = "gpio";
@@ -1371,3 +1421,39 @@ &usb_1_ss2_dwc3_hs {
 &usb_1_ss2_qmpphy_out {
 	remote-endpoint = <&retimer_ss2_ss_in>;
 };
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};

---
base-commit: 9388ec571cb1adba59d1cded2300eeb11827679c
change-id: 20250324-x1e001de-devkit-dts-enable-usb-a-ports-6d6e4934cb97

Best regards,
-- 
Abel Vesa <abel.vesa@linaro.org>

On Mon, 24 Mar 2025 16:08:19 +0200, Abel Vesa wrote:
> The Qualcomm X Elite Devkit has 2 USB-A ports, both connected to the USB
> multiport controller, each one via a separate NXP PTN3222 eUSB2-to-USB2
> redriver to the eUSB2 PHY for High-Speed support, with a dedicated QMP
> PHY for SuperSpeed support.
> 
> Describe each redriver and then enable each pair of PHYs and the
> USB controller itself, in order to enable support for the 2 USB-A ports.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: x1e001de-devkit: Enable support for both Type-A USB ports
      commit: d12fbd11c5a3e98c2f6372252bf84b0e10dd91cc

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>

On Mon, Mar 24, 2025 at 04:08:19PM +0200, Abel Vesa wrote:
> The Qualcomm X Elite Devkit has 2 USB-A ports, both connected to the USB
> multiport controller, each one via a separate NXP PTN3222 eUSB2-to-USB2
> redriver to the eUSB2 PHY for High-Speed support, with a dedicated QMP
> PHY for SuperSpeed support.
> 
> Describe each redriver and then enable each pair of PHYs and the
> USB controller itself, in order to enable support for the 2 USB-A ports.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 86 ++++++++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

-- 
With best wishes
Dmitry