Add missing Tegra114 nvmem cells and fuse lookups which were added for
Tegra124+ but omitted for Tegra114.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/soc/tegra/fuse/fuse-tegra30.c | 122 ++++++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
index eb14e5ff5a0a..a79f83d175d9 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -117,6 +117,124 @@ const struct tegra_fuse_soc tegra30_fuse_soc = {
 #endif
 
 #ifdef CONFIG_ARCH_TEGRA_114_SOC
+static const struct nvmem_cell_info tegra114_fuse_cells[] = {
+	{
+		.name = "tsensor-cpu1",
+		.offset = 0x084,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-cpu2",
+		.offset = 0x088,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-common",
+		.offset = 0x08c,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-cpu0",
+		.offset = 0x098,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "xusb-pad-calibration",
+		.offset = 0x0f0,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-cpu3",
+		.offset = 0x12c,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-gpu",
+		.offset = 0x154,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-mem0",
+		.offset = 0x158,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-mem1",
+		.offset = 0x15c,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-pllx",
+		.offset = 0x160,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	},
+};
+
+static const struct nvmem_cell_lookup tegra114_fuse_lookups[] = {
+	{
+		.nvmem_name = "fuse",
+		.cell_name = "xusb-pad-calibration",
+		.dev_id = "7009f000.padctl",
+		.con_id = "calibration",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-common",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "common",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu0",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu0",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu1",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu1",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu2",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu2",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu3",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu3",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-mem0",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "mem0",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-mem1",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "mem1",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-gpu",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "gpu",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-pllx",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "pllx",
+	},
+};
+
 static const struct tegra_fuse_info tegra114_fuse_info = {
 	.read = tegra30_fuse_read,
 	.size = 0x2a0,
@@ -127,6 +245,10 @@ const struct tegra_fuse_soc tegra114_fuse_soc = {
 	.init = tegra30_fuse_init,
 	.speedo_init = tegra114_init_speedo_data,
 	.info = &tegra114_fuse_info,
+	.lookups = tegra114_fuse_lookups,
+	.num_lookups = ARRAY_SIZE(tegra114_fuse_lookups),
+	.cells = tegra114_fuse_cells,
+	.num_cells = ARRAY_SIZE(tegra114_fuse_cells),
 	.soc_attr_group = &tegra_soc_attr_group,
 	.clk_suspend_on = false,
 };
-- 
2.43.0

On Fri, Mar 21, 2025 at 04:53:22PM +0200, Svyatoslav Ryhel wrote:
> Add missing Tegra114 nvmem cells and fuse lookups which were added for
> Tegra124+ but omitted for Tegra114.
> 
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
>  drivers/soc/tegra/fuse/fuse-tegra30.c | 122 ++++++++++++++++++++++++++
>  1 file changed, 122 insertions(+)
> 
> diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c

Why this code does not end up in a fuse-tegra114.c ? (as there is
speedo-tegra114.c along in the directory) ?

-- 

 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

On Fri, May 16, 2025 at 11:20:54AM +0200, Daniel Lezcano wrote:
> On Fri, Mar 21, 2025 at 04:53:22PM +0200, Svyatoslav Ryhel wrote:
> > Add missing Tegra114 nvmem cells and fuse lookups which were added for
> > Tegra124+ but omitted for Tegra114.
> > 
> > Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > ---
> >  drivers/soc/tegra/fuse/fuse-tegra30.c | 122 ++++++++++++++++++++++++++
> >  1 file changed, 122 insertions(+)
> > 
> > diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
> 
> Why this code does not end up in a fuse-tegra114.c ? (as there is
> speedo-tegra114.c along in the directory) ?

Given the nature of this data, there never seemed to be much of an
incentive to split it into different files. We've added a bunch of
these per-SoC data structures to the Tegra30 file over the years.
Primarily this was done because the register layout introduced in
Tegra30 has remained largely the same.

In most cases it's on the order of a hundred lines of code per SoC
and sometimes there's reuse of data and function pointers, so keeping
it all in one file has the benefit of not needing dependencies between
files, and the file size is still very manageable.

Thierry