[v1] usb: dwc3: Abort suspend on soft disconnect failure

[PATCH] usb: dwc3: Abort suspend on soft disconnect failure

Posted by Kuen-Han Tsai 9 months ago

When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps
going with the suspend, resulting in a period where the power domain is
off, but the gadget driver remains connected.  Within this time frame,
invoking vbus_event_work() will cause an error as it attempts to access
DWC3 registers for endpoint disabling after the power domain has been
completely shut down.

Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the
controller and proceeds with a soft connect.

CC: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
---

Kernel panic - not syncing: Asynchronous SError Interrupt
Workqueue: events vbus_event_work
Call trace:
 dump_backtrace+0xf4/0x118
 show_stack+0x18/0x24
 dump_stack_lvl+0x60/0x7c
 dump_stack+0x18/0x3c
 panic+0x16c/0x390
 nmi_panic+0xa4/0xa8
 arm64_serror_panic+0x6c/0x94
 do_serror+0xc4/0xd0
 el1h_64_error_handler+0x34/0x48
 el1h_64_error+0x68/0x6c
 readl+0x4c/0x8c
 __dwc3_gadget_ep_disable+0x48/0x230
 dwc3_gadget_ep_disable+0x50/0xc0
 usb_ep_disable+0x44/0xe4
 ffs_func_eps_disable+0x64/0xc8
 ffs_func_set_alt+0x74/0x368
 ffs_func_disable+0x18/0x28
 composite_disconnect+0x90/0xec
 configfs_composite_disconnect+0x64/0x88
 usb_gadget_disconnect_locked+0xc0/0x168
 vbus_event_work+0x3c/0x58
 process_one_work+0x1e4/0x43c
 worker_thread+0x25c/0x430
 kthread+0x104/0x1d4
 ret_from_fork+0x10/0x20

---
 drivers/usb/dwc3/core.c   | 10 +++++++---
 drivers/usb/dwc3/gadget.c | 22 +++++++++-------------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 66a08b527165..d64d17677bdb 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -2387,7 +2387,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
 static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 {
 	u32 reg;
-	int i;
+	int i, ret;

 	if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) {
 		dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) &
@@ -2406,7 +2406,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 	case DWC3_GCTL_PRTCAP_DEVICE:
 		if (pm_runtime_suspended(dwc->dev))
 			break;
-		dwc3_gadget_suspend(dwc);
+		ret = dwc3_gadget_suspend(dwc);
+		if (ret)
+			return ret
 		synchronize_irq(dwc->irq_gadget);
 		dwc3_core_exit(dwc);
 		break;
@@ -2441,7 +2443,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 			break;

 		if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
-			dwc3_gadget_suspend(dwc);
+			ret = dwc3_gadget_suspend(dwc);
+			if (ret)
+				return ret;
 			synchronize_irq(dwc->irq_gadget);
 		}

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 89a4dc8ebf94..316c1589618e 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4776,26 +4776,22 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
 	int ret;

 	ret = dwc3_gadget_soft_disconnect(dwc);
-	if (ret)
-		goto err;
-
-	spin_lock_irqsave(&dwc->lock, flags);
-	if (dwc->gadget_driver)
-		dwc3_disconnect_gadget(dwc);
-	spin_unlock_irqrestore(&dwc->lock, flags);
-
-	return 0;
-
-err:
 	/*
 	 * Attempt to reset the controller's state. Likely no
 	 * communication can be established until the host
 	 * performs a port reset.
 	 */
-	if (dwc->softconnect)
+	if (ret && dwc->softconnect) {
 		dwc3_gadget_soft_connect(dwc);
+		return ret;
+	}

-	return ret;
+	spin_lock_irqsave(&dwc->lock, flags);
+	if (dwc->gadget_driver)
+		dwc3_disconnect_gadget(dwc);
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
 }

 int dwc3_gadget_resume(struct dwc3 *dwc)
--
2.49.0.395.g12beb8f557-goog

Re: [PATCH] usb: dwc3: Abort suspend on soft disconnect failure

Posted by Thinh Nguyen 9 months ago

On Thu, Mar 20, 2025, Kuen-Han Tsai wrote:
> When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps
> going with the suspend, resulting in a period where the power domain is
> off, but the gadget driver remains connected.  Within this time frame,
> invoking vbus_event_work() will cause an error as it attempts to access
> DWC3 registers for endpoint disabling after the power domain has been
> completely shut down.
> 
> Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the
> controller and proceeds with a soft connect.
> 
> CC: stable@vger.kernel.org

Please add Fixes tag.

> Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
> ---
> 
> Kernel panic - not syncing: Asynchronous SError Interrupt
> Workqueue: events vbus_event_work
> Call trace:
>  dump_backtrace+0xf4/0x118
>  show_stack+0x18/0x24
>  dump_stack_lvl+0x60/0x7c
>  dump_stack+0x18/0x3c
>  panic+0x16c/0x390
>  nmi_panic+0xa4/0xa8
>  arm64_serror_panic+0x6c/0x94
>  do_serror+0xc4/0xd0
>  el1h_64_error_handler+0x34/0x48
>  el1h_64_error+0x68/0x6c
>  readl+0x4c/0x8c
>  __dwc3_gadget_ep_disable+0x48/0x230
>  dwc3_gadget_ep_disable+0x50/0xc0
>  usb_ep_disable+0x44/0xe4
>  ffs_func_eps_disable+0x64/0xc8
>  ffs_func_set_alt+0x74/0x368
>  ffs_func_disable+0x18/0x28
>  composite_disconnect+0x90/0xec
>  configfs_composite_disconnect+0x64/0x88
>  usb_gadget_disconnect_locked+0xc0/0x168
>  vbus_event_work+0x3c/0x58
>  process_one_work+0x1e4/0x43c
>  worker_thread+0x25c/0x430
>  kthread+0x104/0x1d4
>  ret_from_fork+0x10/0x20
> 
> ---
>  drivers/usb/dwc3/core.c   | 10 +++++++---
>  drivers/usb/dwc3/gadget.c | 22 +++++++++-------------
>  2 files changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 66a08b527165..d64d17677bdb 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -2387,7 +2387,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
>  static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>  {
>  	u32 reg;
> -	int i;
> +	int i, ret;

Minor nit: Can we keep declarations in separate lines.

> 
>  	if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) {
>  		dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) &
> @@ -2406,7 +2406,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>  	case DWC3_GCTL_PRTCAP_DEVICE:
>  		if (pm_runtime_suspended(dwc->dev))
>  			break;
> -		dwc3_gadget_suspend(dwc);
> +		ret = dwc3_gadget_suspend(dwc);
> +		if (ret)
> +			return ret
>  		synchronize_irq(dwc->irq_gadget);
>  		dwc3_core_exit(dwc);
>  		break;
> @@ -2441,7 +2443,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
>  			break;
> 
>  		if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
> -			dwc3_gadget_suspend(dwc);
> +			ret = dwc3_gadget_suspend(dwc);
> +			if (ret)
> +				return ret;
>  			synchronize_irq(dwc->irq_gadget);
>  		}
> 
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 89a4dc8ebf94..316c1589618e 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -4776,26 +4776,22 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
>  	int ret;
> 
>  	ret = dwc3_gadget_soft_disconnect(dwc);
> -	if (ret)
> -		goto err;
> -
> -	spin_lock_irqsave(&dwc->lock, flags);
> -	if (dwc->gadget_driver)
> -		dwc3_disconnect_gadget(dwc);
> -	spin_unlock_irqrestore(&dwc->lock, flags);
> -
> -	return 0;
> -
> -err:
>  	/*
>  	 * Attempt to reset the controller's state. Likely no
>  	 * communication can be established until the host
>  	 * performs a port reset.
>  	 */
> -	if (dwc->softconnect)
> +	if (ret && dwc->softconnect) {
>  		dwc3_gadget_soft_connect(dwc);
> +		return ret;
> +	}
> 
> -	return ret;
> +	spin_lock_irqsave(&dwc->lock, flags);
> +	if (dwc->gadget_driver)
> +		dwc3_disconnect_gadget(dwc);
> +	spin_unlock_irqrestore(&dwc->lock, flags);
> +
> +	return 0;
>  }
> 
>  int dwc3_gadget_resume(struct dwc3 *dwc)
> --
> 2.49.0.395.g12beb8f557-goog
> 

The rest looks good.

Thanks,
Thinh

Re: [PATCH] usb: dwc3: Abort suspend on soft disconnect failure

Posted by Kuen-Han Tsai 8 months, 4 weeks ago

On Sat, Mar 22, 2025 at 6:03 AM Thinh Nguyen <Thinh.Nguyen@synopsys.com> wrote:
>
> On Thu, Mar 20, 2025, Kuen-Han Tsai wrote:
> > When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps
> > going with the suspend, resulting in a period where the power domain is
> > off, but the gadget driver remains connected.  Within this time frame,
> > invoking vbus_event_work() will cause an error as it attempts to access
> > DWC3 registers for endpoint disabling after the power domain has been
> > completely shut down.
> >
> > Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the
> > controller and proceeds with a soft connect.
> >
> > CC: stable@vger.kernel.org
>
> Please add Fixes tag.

Sent out v2 version of the patch.
https://lore.kernel.org/linux-usb/20250324031758.865242-1-khtsai@google.com/

>
> > Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
> > ---
> >
> > Kernel panic - not syncing: Asynchronous SError Interrupt
> > Workqueue: events vbus_event_work
> > Call trace:
> >  dump_backtrace+0xf4/0x118
> >  show_stack+0x18/0x24
> >  dump_stack_lvl+0x60/0x7c
> >  dump_stack+0x18/0x3c
> >  panic+0x16c/0x390
> >  nmi_panic+0xa4/0xa8
> >  arm64_serror_panic+0x6c/0x94
> >  do_serror+0xc4/0xd0
> >  el1h_64_error_handler+0x34/0x48
> >  el1h_64_error+0x68/0x6c
> >  readl+0x4c/0x8c
> >  __dwc3_gadget_ep_disable+0x48/0x230
> >  dwc3_gadget_ep_disable+0x50/0xc0
> >  usb_ep_disable+0x44/0xe4
> >  ffs_func_eps_disable+0x64/0xc8
> >  ffs_func_set_alt+0x74/0x368
> >  ffs_func_disable+0x18/0x28
> >  composite_disconnect+0x90/0xec
> >  configfs_composite_disconnect+0x64/0x88
> >  usb_gadget_disconnect_locked+0xc0/0x168
> >  vbus_event_work+0x3c/0x58
> >  process_one_work+0x1e4/0x43c
> >  worker_thread+0x25c/0x430
> >  kthread+0x104/0x1d4
> >  ret_from_fork+0x10/0x20
> >
> > ---
> >  drivers/usb/dwc3/core.c   | 10 +++++++---
> >  drivers/usb/dwc3/gadget.c | 22 +++++++++-------------
> >  2 files changed, 16 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > index 66a08b527165..d64d17677bdb 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -2387,7 +2387,7 @@ static int dwc3_core_init_for_resume(struct dwc3 *dwc)
> >  static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
> >  {
> >       u32 reg;
> > -     int i;
> > +     int i, ret;
>
> Minor nit: Can we keep declarations in separate lines.

Fixed.

>
> >
> >       if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) {
> >               dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) &
> > @@ -2406,7 +2406,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
> >       case DWC3_GCTL_PRTCAP_DEVICE:
> >               if (pm_runtime_suspended(dwc->dev))
> >                       break;
> > -             dwc3_gadget_suspend(dwc);
> > +             ret = dwc3_gadget_suspend(dwc);
> > +             if (ret)
> > +                     return ret
> >               synchronize_irq(dwc->irq_gadget);
> >               dwc3_core_exit(dwc);
> >               break;
> > @@ -2441,7 +2443,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
> >                       break;
> >
> >               if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) {
> > -                     dwc3_gadget_suspend(dwc);
> > +                     ret = dwc3_gadget_suspend(dwc);
> > +                     if (ret)
> > +                             return ret;
> >                       synchronize_irq(dwc->irq_gadget);
> >               }
> >
> > diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> > index 89a4dc8ebf94..316c1589618e 100644
> > --- a/drivers/usb/dwc3/gadget.c
> > +++ b/drivers/usb/dwc3/gadget.c
> > @@ -4776,26 +4776,22 @@ int dwc3_gadget_suspend(struct dwc3 *dwc)
> >       int ret;
> >
> >       ret = dwc3_gadget_soft_disconnect(dwc);
> > -     if (ret)
> > -             goto err;
> > -
> > -     spin_lock_irqsave(&dwc->lock, flags);
> > -     if (dwc->gadget_driver)
> > -             dwc3_disconnect_gadget(dwc);
> > -     spin_unlock_irqrestore(&dwc->lock, flags);
> > -
> > -     return 0;
> > -
> > -err:
> >       /*
> >        * Attempt to reset the controller's state. Likely no
> >        * communication can be established until the host
> >        * performs a port reset.
> >        */
> > -     if (dwc->softconnect)
> > +     if (ret && dwc->softconnect) {
> >               dwc3_gadget_soft_connect(dwc);
> > +             return ret;
> > +     }
> >
> > -     return ret;
> > +     spin_lock_irqsave(&dwc->lock, flags);
> > +     if (dwc->gadget_driver)
> > +             dwc3_disconnect_gadget(dwc);
> > +     spin_unlock_irqrestore(&dwc->lock, flags);
> > +
> > +     return 0;
> >  }
> >
> >  int dwc3_gadget_resume(struct dwc3 *dwc)
> > --
> > 2.49.0.395.g12beb8f557-goog
> >
>
> The rest looks good.
>
> Thanks,
> Thinh

Thanks,
Kuen-Han