1. Patchew
  2. linux
  3. [PATCH v2 00/57] irqdomain: Cleanups and Documentation
  4. View patch

[PATCH v2 47/57] irqdomain: pinctrl: Switch to irq_find_mapping()

Jiri Slaby (SUSE) posted 57 patches 9 months ago
[PATCH v2 47/57] irqdomain: pinctrl: Switch to irq_find_mapping()
Posted by Jiri Slaby (SUSE) 9 months ago 
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
---
 drivers/pinctrl/pinctrl-keembay.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-keembay.c b/drivers/pinctrl/pinctrl-keembay.c
index b693f4787044..0d7cc8280ea2 100644
--- a/drivers/pinctrl/pinctrl-keembay.c
+++ b/drivers/pinctrl/pinctrl-keembay.c
@@ -1268,7 +1268,7 @@ static void keembay_gpio_irq_handler(struct irq_desc *desc)
 	for_each_set_clump8(bit, clump, &reg, BITS_PER_TYPE(typeof(reg))) {
 		pin = clump & ~KEEMBAY_GPIO_IRQ_ENABLE;
 		val = keembay_read_pin(kpc->base0 + KEEMBAY_GPIO_DATA_IN, pin);
-		kmb_irq = irq_linear_revmap(gc->irq.domain, pin);
+		kmb_irq = irq_find_mapping(gc->irq.domain, pin);
 
 		/* Checks if the interrupt is enabled */
 		if (val && (clump & KEEMBAY_GPIO_IRQ_ENABLE))
-- 
2.49.0
Re: [PATCH v2 47/57] irqdomain: pinctrl: Switch to irq_find_mapping()
Posted by Linus Walleij 9 months ago 
On Wed, Mar 19, 2025 at 10:33 AM Jiri Slaby (SUSE) <jirislaby@kernel.org> wrote:

> irq_linear_revmap() is deprecated, so remove all its uses and supersede
> them by an identical call to irq_find_mapping().
>
> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
[tip: irq/cleanups] pinctrl: keembay: Switch to irq_find_mapping()
Posted by tip-bot2 for Jiri Slaby (SUSE) 7 months ago 
The following commit has been merged into the irq/cleanups branch of tip:

Commit-ID:     609f900ad6093af6f97a313c4bacf4ca3757db4a
Gitweb:        https://git.kernel.org/tip/609f900ad6093af6f97a313c4bacf4ca3757db4a
Author:        Jiri Slaby (SUSE) <jirislaby@kernel.org>
AuthorDate:    Wed, 19 Mar 2025 10:29:40 +01:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Fri, 16 May 2025 21:06:12 +02:00

pinctrl: keembay: Switch to irq_find_mapping()

irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().

[ tglx: Fix up subject prefix ]

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/20250319092951.37667-48-jirislaby@kernel.org



---
 drivers/pinctrl/pinctrl-keembay.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-keembay.c b/drivers/pinctrl/pinctrl-keembay.c
index b693f47..0d7cc82 100644
--- a/drivers/pinctrl/pinctrl-keembay.c
+++ b/drivers/pinctrl/pinctrl-keembay.c
@@ -1268,7 +1268,7 @@ static void keembay_gpio_irq_handler(struct irq_desc *desc)
 	for_each_set_clump8(bit, clump, &reg, BITS_PER_TYPE(typeof(reg))) {
 		pin = clump & ~KEEMBAY_GPIO_IRQ_ENABLE;
 		val = keembay_read_pin(kpc->base0 + KEEMBAY_GPIO_DATA_IN, pin);
-		kmb_irq = irq_linear_revmap(gc->irq.domain, pin);
+		kmb_irq = irq_find_mapping(gc->irq.domain, pin);
 
 		/* Checks if the interrupt is enabled */
 		if (val && (clump & KEEMBAY_GPIO_IRQ_ENABLE))
[tip: irq/cleanups] pinctrl: keembay: Switch to irq_find_mapping()
Posted by tip-bot2 for Jiri Slaby (SUSE) 7 months, 1 week ago 
The following commit has been merged into the irq/cleanups branch of tip:

Commit-ID:     377c6a8184bd97b6ea7c6a15ea6561008d710b15
Gitweb:        https://git.kernel.org/tip/377c6a8184bd97b6ea7c6a15ea6561008d710b15
Author:        Jiri Slaby (SUSE) <jirislaby@kernel.org>
AuthorDate:    Wed, 19 Mar 2025 10:29:40 +01:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Wed, 07 May 2025 15:39:42 +02:00

pinctrl: keembay: Switch to irq_find_mapping()

irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().

[ tglx: Fix up subject prefix ]

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/20250319092951.37667-48-jirislaby@kernel.org


---
 drivers/pinctrl/pinctrl-keembay.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-keembay.c b/drivers/pinctrl/pinctrl-keembay.c
index b693f47..0d7cc82 100644
--- a/drivers/pinctrl/pinctrl-keembay.c
+++ b/drivers/pinctrl/pinctrl-keembay.c
@@ -1268,7 +1268,7 @@ static void keembay_gpio_irq_handler(struct irq_desc *desc)
 	for_each_set_clump8(bit, clump, &reg, BITS_PER_TYPE(typeof(reg))) {
 		pin = clump & ~KEEMBAY_GPIO_IRQ_ENABLE;
 		val = keembay_read_pin(kpc->base0 + KEEMBAY_GPIO_DATA_IN, pin);
-		kmb_irq = irq_linear_revmap(gc->irq.domain, pin);
+		kmb_irq = irq_find_mapping(gc->irq.domain, pin);
 
 		/* Checks if the interrupt is enabled */
 		if (val && (clump & KEEMBAY_GPIO_IRQ_ENABLE))
[tip: irq/cleanups] pinctrl: keembay: Switch to irq_find_mapping()
Posted by tip-bot2 for Jiri Slaby (SUSE) 7 months, 1 week ago 
The following commit has been merged into the irq/cleanups branch of tip:

Commit-ID:     219e99b99b848f20eca692cf663c25178c15dd3b
Gitweb:        https://git.kernel.org/tip/219e99b99b848f20eca692cf663c25178c15dd3b
Author:        Jiri Slaby (SUSE) <jirislaby@kernel.org>
AuthorDate:    Wed, 19 Mar 2025 10:29:40 +01:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Wed, 07 May 2025 09:53:24 +02:00

pinctrl: keembay: Switch to irq_find_mapping()

irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().

[ tglx: Fix up subject prefix ]

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/20250319092951.37667-48-jirislaby@kernel.org

---
 drivers/pinctrl/pinctrl-keembay.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-keembay.c b/drivers/pinctrl/pinctrl-keembay.c
index b693f47..0d7cc82 100644
--- a/drivers/pinctrl/pinctrl-keembay.c
+++ b/drivers/pinctrl/pinctrl-keembay.c
@@ -1268,7 +1268,7 @@ static void keembay_gpio_irq_handler(struct irq_desc *desc)
 	for_each_set_clump8(bit, clump, &reg, BITS_PER_TYPE(typeof(reg))) {
 		pin = clump & ~KEEMBAY_GPIO_IRQ_ENABLE;
 		val = keembay_read_pin(kpc->base0 + KEEMBAY_GPIO_DATA_IN, pin);
-		kmb_irq = irq_linear_revmap(gc->irq.domain, pin);
+		kmb_irq = irq_find_mapping(gc->irq.domain, pin);
 
 		/* Checks if the interrupt is enabled */
 		if (val && (clump & KEEMBAY_GPIO_IRQ_ENABLE))
[tip: irq/cleanups] pinctrl: keembay: Switch to irq_find_mapping()
Posted by tip-bot2 for Jiri Slaby (SUSE) 7 months, 2 weeks ago 
The following commit has been merged into the irq/cleanups branch of tip:

Commit-ID:     159111fb9adbc45515bde074969ef651f531c5cf
Gitweb:        https://git.kernel.org/tip/159111fb9adbc45515bde074969ef651f531c5cf
Author:        Jiri Slaby (SUSE) <jirislaby@kernel.org>
AuthorDate:    Wed, 19 Mar 2025 10:29:40 +01:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Tue, 06 May 2025 14:59:08 +02:00

pinctrl: keembay: Switch to irq_find_mapping()

irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().

[ tglx: Fix up subject prefix ]

Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/20250319092951.37667-48-jirislaby@kernel.org

---
 drivers/pinctrl/pinctrl-keembay.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-keembay.c b/drivers/pinctrl/pinctrl-keembay.c
index b693f47..0d7cc82 100644
--- a/drivers/pinctrl/pinctrl-keembay.c
+++ b/drivers/pinctrl/pinctrl-keembay.c
@@ -1268,7 +1268,7 @@ static void keembay_gpio_irq_handler(struct irq_desc *desc)
 	for_each_set_clump8(bit, clump, &reg, BITS_PER_TYPE(typeof(reg))) {
 		pin = clump & ~KEEMBAY_GPIO_IRQ_ENABLE;
 		val = keembay_read_pin(kpc->base0 + KEEMBAY_GPIO_DATA_IN, pin);
-		kmb_irq = irq_linear_revmap(gc->irq.domain, pin);
+		kmb_irq = irq_find_mapping(gc->irq.domain, pin);
 
 		/* Checks if the interrupt is enabled */
 		if (val && (clump & KEEMBAY_GPIO_IRQ_ENABLE))

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.