drivers/mmc/host/sdhci-omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
We have received reports about cards can become corrupt related to the
aggressive PM support. Let's make a partial revert of the change that
enabled the feature.
Reported-by: David Owens <daowens01@gmail.com>
Reported-by: Romain Naour <romain.naour@smile.fr>
Reported-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Fixes: 3edf588e7fe0 ("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/host/sdhci-omap.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 54d795205fb4..26a9a8b5682a 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -1339,8 +1339,8 @@ static int sdhci_omap_probe(struct platform_device *pdev)
/* R1B responses is required to properly manage HW busy detection. */
mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
- /* Allow card power off and runtime PM for eMMC/SD card devices */
- mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_AGGRESSIVE_PM;
+ /* Enable SDIO card power off. */
+ mmc->caps |= MMC_CAP_POWER_OFF_CARD;
ret = sdhci_setup_host(host);
if (ret)
--
2.43.0
On Wed, Mar 12, 2025 at 7:17 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
>
> We have received reports about cards can become corrupt related to the
> aggressive PM support. Let's make a partial revert of the change that
> enabled the feature.
>
> Reported-by: David Owens <daowens01@gmail.com>
> Reported-by: Romain Naour <romain.naour@smile.fr>
> Reported-by: Robert Nelson <robertcnelson@gmail.com>
> Tested-by: Robert Nelson <robertcnelson@gmail.com>
> Fixes: 3edf588e7fe0 ("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM")
> Cc: stable@vger.kernel.org
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---
> drivers/mmc/host/sdhci-omap.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 54d795205fb4..26a9a8b5682a 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -1339,8 +1339,8 @@ static int sdhci_omap_probe(struct platform_device *pdev)
> /* R1B responses is required to properly manage HW busy detection. */
> mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
>
> - /* Allow card power off and runtime PM for eMMC/SD card devices */
> - mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_AGGRESSIVE_PM;
> + /* Enable SDIO card power off. */
> + mmc->caps |= MMC_CAP_POWER_OFF_CARD;
>
> ret = sdhci_setup_host(host);
> if (ret)
> --
> 2.43.0
>
Thanks Ulf, i also have this exact revert running on the target in our
ci farm, i think we should be good. But I'll validate it in 4 weeks!
Regards,
--
Robert Nelson
https://rcn-ee.com/
On Sun, 16 Mar 2025 at 21:54, Robert Nelson <robertcnelson@gmail.com> wrote:
>
> On Wed, Mar 12, 2025 at 7:17 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >
> > We have received reports about cards can become corrupt related to the
> > aggressive PM support. Let's make a partial revert of the change that
> > enabled the feature.
> >
> > Reported-by: David Owens <daowens01@gmail.com>
> > Reported-by: Romain Naour <romain.naour@smile.fr>
> > Reported-by: Robert Nelson <robertcnelson@gmail.com>
> > Tested-by: Robert Nelson <robertcnelson@gmail.com>
> > Fixes: 3edf588e7fe0 ("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM")
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> > ---
> > drivers/mmc/host/sdhci-omap.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> > index 54d795205fb4..26a9a8b5682a 100644
> > --- a/drivers/mmc/host/sdhci-omap.c
> > +++ b/drivers/mmc/host/sdhci-omap.c
> > @@ -1339,8 +1339,8 @@ static int sdhci_omap_probe(struct platform_device *pdev)
> > /* R1B responses is required to properly manage HW busy detection. */
> > mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
> >
> > - /* Allow card power off and runtime PM for eMMC/SD card devices */
> > - mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_AGGRESSIVE_PM;
> > + /* Enable SDIO card power off. */
> > + mmc->caps |= MMC_CAP_POWER_OFF_CARD;
> >
> > ret = sdhci_setup_host(host);
> > if (ret)
> > --
> > 2.43.0
> >
>
> Thanks Ulf, i also have this exact revert running on the target in our
> ci farm, i think we should be good. But I'll validate it in 4 weeks!
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
Thanks Robert for helping out!
In the meantime I decided to queue this up for next, to allow it to
get more testing in linux-next.
Kind regards
Uffe
* Ulf Hansson <ulf.hansson@linaro.org> [250317 10:51]:
> On Sun, 16 Mar 2025 at 21:54, Robert Nelson <robertcnelson@gmail.com> wrote:
> >
> > On Wed, Mar 12, 2025 at 7:17 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > >
> > > We have received reports about cards can become corrupt related to the
> > > aggressive PM support. Let's make a partial revert of the change that
> > > enabled the feature.
> > >
> > > Reported-by: David Owens <daowens01@gmail.com>
> > > Reported-by: Romain Naour <romain.naour@smile.fr>
> > > Reported-by: Robert Nelson <robertcnelson@gmail.com>
> > > Tested-by: Robert Nelson <robertcnelson@gmail.com>
> > > Fixes: 3edf588e7fe0 ("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM")
> > > Cc: stable@vger.kernel.org
> > > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> > > ---
> > > drivers/mmc/host/sdhci-omap.c | 4 ++--
> > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> > > index 54d795205fb4..26a9a8b5682a 100644
> > > --- a/drivers/mmc/host/sdhci-omap.c
> > > +++ b/drivers/mmc/host/sdhci-omap.c
> > > @@ -1339,8 +1339,8 @@ static int sdhci_omap_probe(struct platform_device *pdev)
> > > /* R1B responses is required to properly manage HW busy detection. */
> > > mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
> > >
> > > - /* Allow card power off and runtime PM for eMMC/SD card devices */
> > > - mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_AGGRESSIVE_PM;
> > > + /* Enable SDIO card power off. */
> > > + mmc->caps |= MMC_CAP_POWER_OFF_CARD;
> > >
> > > ret = sdhci_setup_host(host);
> > > if (ret)
> > > --
> > > 2.43.0
> > >
> >
> > Thanks Ulf, i also have this exact revert running on the target in our
> > ci farm, i think we should be good. But I'll validate it in 4 weeks!
> >
> > Regards,
> >
> > --
> > Robert Nelson
> > https://rcn-ee.com/
>
> Thanks Robert for helping out!
>
> In the meantime I decided to queue this up for next, to allow it to
> get more testing in linux-next.
Thanks looks good to me too.
Regards,
Tony
On Wed, 19 Mar 2025 at 04:59, Tony Lindgren <tony@atomide.com> wrote:
>
> * Ulf Hansson <ulf.hansson@linaro.org> [250317 10:51]:
> > On Sun, 16 Mar 2025 at 21:54, Robert Nelson <robertcnelson@gmail.com> wrote:
> > >
> > > On Wed, Mar 12, 2025 at 7:17 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > > >
> > > > We have received reports about cards can become corrupt related to the
> > > > aggressive PM support. Let's make a partial revert of the change that
> > > > enabled the feature.
> > > >
> > > > Reported-by: David Owens <daowens01@gmail.com>
> > > > Reported-by: Romain Naour <romain.naour@smile.fr>
> > > > Reported-by: Robert Nelson <robertcnelson@gmail.com>
> > > > Tested-by: Robert Nelson <robertcnelson@gmail.com>
> > > > Fixes: 3edf588e7fe0 ("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM")
> > > > Cc: stable@vger.kernel.org
> > > > Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> > > > ---
> > > > drivers/mmc/host/sdhci-omap.c | 4 ++--
> > > > 1 file changed, 2 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> > > > index 54d795205fb4..26a9a8b5682a 100644
> > > > --- a/drivers/mmc/host/sdhci-omap.c
> > > > +++ b/drivers/mmc/host/sdhci-omap.c
> > > > @@ -1339,8 +1339,8 @@ static int sdhci_omap_probe(struct platform_device *pdev)
> > > > /* R1B responses is required to properly manage HW busy detection. */
> > > > mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
> > > >
> > > > - /* Allow card power off and runtime PM for eMMC/SD card devices */
> > > > - mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_AGGRESSIVE_PM;
> > > > + /* Enable SDIO card power off. */
> > > > + mmc->caps |= MMC_CAP_POWER_OFF_CARD;
> > > >
> > > > ret = sdhci_setup_host(host);
> > > > if (ret)
> > > > --
> > > > 2.43.0
> > > >
> > >
> > > Thanks Ulf, i also have this exact revert running on the target in our
> > > ci farm, i think we should be good. But I'll validate it in 4 weeks!
> > >
> > > Regards,
> > >
> > > --
> > > Robert Nelson
> > > https://rcn-ee.com/
> >
> > Thanks Robert for helping out!
> >
> > In the meantime I decided to queue this up for next, to allow it to
> > get more testing in linux-next.
>
> Thanks looks good to me too.
>
> Regards,
>
> Tony
Thanks, I have added your Reviewed-by tag too.
Kind regards
Uffe
On 12/03/25 14:17, Ulf Hansson wrote:
> We have received reports about cards can become corrupt related to the
> aggressive PM support. Let's make a partial revert of the change that
> enabled the feature.
>
> Reported-by: David Owens <daowens01@gmail.com>
> Reported-by: Romain Naour <romain.naour@smile.fr>
> Reported-by: Robert Nelson <robertcnelson@gmail.com>
> Tested-by: Robert Nelson <robertcnelson@gmail.com>
> Fixes: 3edf588e7fe0 ("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM")
> Cc: stable@vger.kernel.org
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
> ---
> drivers/mmc/host/sdhci-omap.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 54d795205fb4..26a9a8b5682a 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -1339,8 +1339,8 @@ static int sdhci_omap_probe(struct platform_device *pdev)
> /* R1B responses is required to properly manage HW busy detection. */
> mmc->caps |= MMC_CAP_NEED_RSP_BUSY;
>
> - /* Allow card power off and runtime PM for eMMC/SD card devices */
> - mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_AGGRESSIVE_PM;
> + /* Enable SDIO card power off. */
> + mmc->caps |= MMC_CAP_POWER_OFF_CARD;
>
> ret = sdhci_setup_host(host);
> if (ret)
© 2016 - 2025 Red Hat, Inc.