Make sure existing return values are actually used.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/usb/lan78xx.c | 38 ++++++++++++++++++++++++++------------
 1 file changed, 26 insertions(+), 12 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index dd55a9ba78fa..465762c3efcf 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2569,31 +2569,40 @@ static struct phy_device *lan7801_phy_init(struct lan78xx_net *dev)
 {
 	struct phy_device *phydev;
 	int ret;
-	u32 buf;
 
 	phydev = phy_find_first(dev->mdiobus);
 	if (!phydev) {
 		netdev_dbg(dev->net, "PHY Not Found!! Forcing RGMII configuration\n");
 		ret = lan78xx_write_reg(dev, MAC_RGMII_ID,
 					MAC_RGMII_ID_TXC_DELAY_EN_);
+		if (ret < 0)
+			return ERR_PTR(ret);
+
 		ret = lan78xx_write_reg(dev, RGMII_TX_BYP_DLL, 0x3D00);
-		ret = lan78xx_read_reg(dev, HW_CFG, &buf);
-		buf |= HW_CFG_CLK125_EN_;
-		buf |= HW_CFG_REFCLK25_EN_;
-		ret = lan78xx_write_reg(dev, HW_CFG, buf);
+		if (ret < 0)
+			return ERR_PTR(ret);
+
+		ret = lan78xx_update_reg(dev, HW_CFG, HW_CFG_CLK125_EN_ |
+					 HW_CFG_REFCLK25_EN_,
+					 HW_CFG_CLK125_EN_ | HW_CFG_REFCLK25_EN_);
+		if (ret < 0)
+			return ERR_PTR(ret);
 	} else {
 		if (!phydev->drv) {
 			netdev_err(dev->net, "no PHY driver found\n");
-			return NULL;
+			return ERR_PTR(-ENODEV);
 		}
 		phydev->interface = PHY_INTERFACE_MODE_RGMII_ID;
 		/* The PHY driver is responsible to configure proper RGMII
 		 * interface delays. Disable RGMII delays on MAC side.
 		 */
-		lan78xx_write_reg(dev, MAC_RGMII_ID, 0);
+		ret = lan78xx_write_reg(dev, MAC_RGMII_ID, 0);
+		if (ret < 0)
+			return ERR_PTR(ret);
 
 		phydev->is_internal = false;
 	}
+
 	return phydev;
 }
 
@@ -2662,7 +2671,7 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 		phydev = phy_find_first(dev->mdiobus);
 		if (!phydev) {
 			netdev_err(dev->net, "no PHY found\n");
-			return -EIO;
+			return -ENODEV;
 		}
 		phydev->is_internal = true;
 		phydev->interface = PHY_INTERFACE_MODE_GMII;
@@ -2670,7 +2679,7 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 
 	default:
 		netdev_err(dev->net, "Unknown CHIP ID found\n");
-		return -EIO;
+		return -ENODEV;
 	}
 
 	/* if phyirq is not set, use polling mode in phylib */
@@ -2684,7 +2693,7 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 	if (ret) {
 		netdev_err(dev->net, "can't attach PHY to %s, error %pe\n",
 			   dev->mdiobus->id, ERR_PTR(ret));
-		return -EIO;
+		return ret;
 	}
 
 	phy_support_eee(phydev);
@@ -2698,7 +2707,10 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 						      sizeof(u32));
 		if (len >= 0) {
 			/* Ensure the appropriate LEDs are enabled */
-			lan78xx_read_reg(dev, HW_CFG, &reg);
+			ret = lan78xx_read_reg(dev, HW_CFG, &reg);
+			if (ret < 0)
+				return ret;
+
 			reg &= ~(HW_CFG_LED0_EN_ |
 				 HW_CFG_LED1_EN_ |
 				 HW_CFG_LED2_EN_ |
@@ -2707,7 +2719,9 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 				(len > 1) * HW_CFG_LED1_EN_ |
 				(len > 2) * HW_CFG_LED2_EN_ |
 				(len > 3) * HW_CFG_LED3_EN_;
-			lan78xx_write_reg(dev, HW_CFG, reg);
+			ret = lan78xx_write_reg(dev, HW_CFG, reg);
+			if (ret < 0)
+				return ret;
 		}
 	}
 
-- 
2.39.5