Hi Oleksij
On 3/5/25 14:14, Oleksij Rempel wrote:
> This patch series adds support for the Plymovent AQM board based on the
> STM32MP151C SoC. Additionally, the ICS-43432 device tree binding is
> converted to YAML to address a validation warning.
>
> The ICS-43432 patch resolves one of the devicetree validation warnings.
> However, the false-positive warning:
>
> "audio-controller@44004000: port:endpoint: Unevaluated properties are
> not allowed ('format' was unexpected)"
>
> remains unresolved. The "format" property is required for proper
> functionality of this device.
>
> Best regards,
>
> Oleksij Rempel (4):
> dt-bindings: sound: convert ICS-43432 binding to YAML
> dt-bindings: arm: stm32: Add Plymovent AQM board
> ARM: dts: stm32: Add pinmux groups for Plymovent AQM board
> arm: dts: stm32: Add Plymovent AQM devicetree
>
> .../devicetree/bindings/arm/stm32/stm32.yaml | 1 +
> .../devicetree/bindings/sound/ics43432.txt | 19 -
> .../bindings/sound/invensense,ics43432.yaml | 51 +++
> arch/arm/boot/dts/st/Makefile | 1 +
> arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi | 292 ++++++++++++++
> arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts | 376 ++++++++++++++++++
> 6 files changed, 721 insertions(+), 19 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/ics43432.txt
> create mode 100644 Documentation/devicetree/bindings/sound/invensense,ics43432.yaml
> create mode 100644 arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
>
> --
> 2.39.5
>
Series applied on stm32-next.
Thanks
Alex