1. Patchew
  2. linux
  3. [PATCH net 0/2] net: phy: nxp-c45-tja11xx: add errata for TJA112XA/B
  4. View patch

[PATCH net 1/2] net: phy: nxp-c45-tja11xx: add TJA112X PHY configuration errata

Andrei Botila posted 2 patches 11 months, 1 week ago
There is a newer version of this series
[PATCH net 1/2] net: phy: nxp-c45-tja11xx: add TJA112X PHY configuration errata
Posted by Andrei Botila 11 months, 1 week ago 
The most recent sillicon versions of TJA1120 and TJA1121 can achieve
full silicon performance by putting the PHY in managed mode.

It is necessary to apply these PHY writes before link gets established.
Application of this fix is required after restart of device and wakeup
from sleep.

Cc: stable@vger.kernel.org
Fixes: f1fe5dff2b8a ("net: phy: nxp-c45-tja11xx: add TJA1120 support")
Signed-off-by: Andrei Botila <andrei.botila@oss.nxp.com>
---
 drivers/net/phy/nxp-c45-tja11xx.c | 52 +++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
index 34231b5b9175..e083b1a714fd 100644
--- a/drivers/net/phy/nxp-c45-tja11xx.c
+++ b/drivers/net/phy/nxp-c45-tja11xx.c
@@ -22,6 +22,11 @@
 #define PHY_ID_TJA_1103			0x001BB010
 #define PHY_ID_TJA_1120			0x001BB031
 
+#define VEND1_DEVICE_ID3		0x0004
+#define TJA1120_DEV_ID3_SILICON_VERSION	GENMASK(15, 12)
+#define TJA1120_DEV_ID3_SAMPLE_TYPE	GENMASK(11, 8)
+#define DEVICE_ID3_SAMPLE_TYPE_R	0x9
+
 #define VEND1_DEVICE_CONTROL		0x0040
 #define DEVICE_CONTROL_RESET		BIT(15)
 #define DEVICE_CONTROL_CONFIG_GLOBAL_EN	BIT(14)
@@ -1593,6 +1598,50 @@ static int nxp_c45_set_phy_mode(struct phy_device *phydev)
 	return 0;
 }
 
+/* Errata: ES_TJA1120 and ES_TJA1121 Rev. 1.0 — 28 November 2024 Section 3.1 */
+static void nxp_c45_tja1120_errata(struct phy_device *phydev)
+{
+	int silicon_version, sample_type;
+	bool macsec_ability;
+	int phy_abilities;
+	int ret = 0;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_ID3);
+	if (ret < 0)
+		return;
+
+	sample_type = FIELD_GET(TJA1120_DEV_ID3_SAMPLE_TYPE, ret);
+	if (sample_type != DEVICE_ID3_SAMPLE_TYPE_R)
+		return;
+
+	silicon_version = FIELD_GET(TJA1120_DEV_ID3_SILICON_VERSION, ret);
+
+	phy_abilities = phy_read_mmd(phydev, MDIO_MMD_VEND1,
+				     VEND1_PORT_ABILITIES);
+	macsec_ability = !!(phy_abilities & MACSEC_ABILITY);
+	if ((!macsec_ability && silicon_version == 2) ||
+	    (macsec_ability && silicon_version == 1)) {
+		/* TJA1120/TJA1121 PHY configuration errata workaround.
+		 * Apply PHY writes sequence before link up.
+		 */
+		if (!macsec_ability) {
+			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x4b95);
+			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0xf3cd);
+		} else {
+			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x89c7);
+			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0893);
+		}
+
+		phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x0476, 0x58a0);
+
+		phy_write_mmd(phydev, MDIO_MMD_PMAPMD, 0x8921, 0xa3a);
+		phy_write_mmd(phydev, MDIO_MMD_PMAPMD, 0x89F1, 0x16c1);
+
+		phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x0);
+		phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0);
+	}
+}
+
 static int nxp_c45_config_init(struct phy_device *phydev)
 {
 	int ret;
@@ -1609,6 +1658,9 @@ static int nxp_c45_config_init(struct phy_device *phydev)
 	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 1);
 	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 2);
 
+	if (phydev->drv->phy_id == PHY_ID_TJA_1120)
+		nxp_c45_tja1120_errata(phydev);
+
 	phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONFIG,
 			 PHY_CONFIG_AUTO);
 
-- 
2.48.1
Re: [PATCH net 1/2] net: phy: nxp-c45-tja11xx: add TJA112X PHY configuration errata
Posted by Andrei Botila 11 months, 1 week ago 
On 3/4/2025 2:16 AM, Andrei Botila wrote:
> The most recent sillicon versions of TJA1120 and TJA1121 can achieve
> full silicon performance by putting the PHY in managed mode.
> 
> It is necessary to apply these PHY writes before link gets established.
> Application of this fix is required after restart of device and wakeup
> from sleep.
> 
> Cc: stable@vger.kernel.org
> Fixes: f1fe5dff2b8a ("net: phy: nxp-c45-tja11xx: add TJA1120 support")
> Signed-off-by: Andrei Botila <andrei.botila@oss.nxp.com>
> ---
>  drivers/net/phy/nxp-c45-tja11xx.c | 52 +++++++++++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
> 
> diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
> index 34231b5b9175..e083b1a714fd 100644
> --- a/drivers/net/phy/nxp-c45-tja11xx.c
> +++ b/drivers/net/phy/nxp-c45-tja11xx.c
> @@ -22,6 +22,11 @@
>  #define PHY_ID_TJA_1103			0x001BB010
>  #define PHY_ID_TJA_1120			0x001BB031
>  
> +#define VEND1_DEVICE_ID3		0x0004
> +#define TJA1120_DEV_ID3_SILICON_VERSION	GENMASK(15, 12)
> +#define TJA1120_DEV_ID3_SAMPLE_TYPE	GENMASK(11, 8)
> +#define DEVICE_ID3_SAMPLE_TYPE_R	0x9
> +
>  #define VEND1_DEVICE_CONTROL		0x0040
>  #define DEVICE_CONTROL_RESET		BIT(15)
>  #define DEVICE_CONTROL_CONFIG_GLOBAL_EN	BIT(14)
> @@ -1593,6 +1598,50 @@ static int nxp_c45_set_phy_mode(struct phy_device *phydev)
>  	return 0;
>  }
>  
> +/* Errata: ES_TJA1120 and ES_TJA1121 Rev. 1.0 — 28 November 2024 Section 3.1 */
> +static void nxp_c45_tja1120_errata(struct phy_device *phydev)
> +{
> +	int silicon_version, sample_type;
> +	bool macsec_ability;
> +	int phy_abilities;
> +	int ret = 0;
> +
> +	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_DEVICE_ID3);
> +	if (ret < 0)
> +		return;
> +
> +	sample_type = FIELD_GET(TJA1120_DEV_ID3_SAMPLE_TYPE, ret);
> +	if (sample_type != DEVICE_ID3_SAMPLE_TYPE_R)
> +		return;
> +
> +	silicon_version = FIELD_GET(TJA1120_DEV_ID3_SILICON_VERSION, ret);
> +
> +	phy_abilities = phy_read_mmd(phydev, MDIO_MMD_VEND1,
> +				     VEND1_PORT_ABILITIES);
> +	macsec_ability = !!(phy_abilities & MACSEC_ABILITY);
> +	if ((!macsec_ability && silicon_version == 2) ||
> +	    (macsec_ability && silicon_version == 1)) {
> +		/* TJA1120/TJA1121 PHY configuration errata workaround.
> +		 * Apply PHY writes sequence before link up.
> +		 */
> +		if (!macsec_ability) {
> +			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x4b95);
> +			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0xf3cd);
> +		} else {
> +			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x89c7);
> +			phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0893);
> +		}
> +
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x0476, 0x58a0);
> +
> +		phy_write_mmd(phydev, MDIO_MMD_PMAPMD, 0x8921, 0xa3a);
> +		phy_write_mmd(phydev, MDIO_MMD_PMAPMD, 0x89F1, 0x16c1);
> +
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x0);
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0);
> +	}
> +}
> +
>  static int nxp_c45_config_init(struct phy_device *phydev)
>  {
>  	int ret;
> @@ -1609,6 +1658,9 @@ static int nxp_c45_config_init(struct phy_device *phydev)
>  	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 1);
>  	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 2);
>  
> +	if (phydev->drv->phy_id == PHY_ID_TJA_1120)

Will send a v2 because the PHY_ID_MATCH_MODEL(PHY_ID_TJA_1120) needed for setting 
phy_id used in this check is removed in the changes from
https://lore.kernel.org/netdev/20250228154320.2979000-3-andrei.botila@oss.nxp.com/ .
I will use a phy_id_compare() for this check.

> +		nxp_c45_tja1120_errata(phydev);
> +
>  	phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_PHY_CONFIG,
>  			 PHY_CONFIG_AUTO);
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.