Add YAML bindings for BCM63268 internal GPHY

Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
---
 .../bindings/net/brcm,bcm63268-gphy.yaml      | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/brcm,bcm63268-gphy.yaml

diff --git a/Documentation/devicetree/bindings/net/brcm,bcm63268-gphy.yaml b/Documentation/devicetree/bindings/net/brcm,bcm63268-gphy.yaml
new file mode 100644
index 000000000000..415f5c03c1a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bcm63268-gphy.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcm63268-gphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 GPHY
+
+description: Broadcom's internal gigabit ethernet PHY on BCM63268 SoC
+
+maintainers:
+  - TBD
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  compatible:
+    const: ethernet-phy-id0362.5f50
+
+  reg:
+    maxItems: 1
+
+  brcm,gpio-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the SoC GPIO controller which contains
+      PHY control registers
+
+required:
+  - reg
+  - brcm,gpio-ctrl
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@4 {
+            compatible = "ethernet-phy-id0362.5f50";
+            reg = <4>;
+
+            resets = <&periph_rst BCM63268_RST_GPHY>;
+
+            brcm,gpio-ctrl = <&gpio_cntl>;
+        };
+    };
-- 
2.43.0

On Thu, 27 Feb 2025 16:27:17 -0800, Kyle Hendry wrote:
> Add YAML bindings for BCM63268 internal GPHY
> 
> Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
> ---
>  .../bindings/net/brcm,bcm63268-gphy.yaml      | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/brcm,bcm63268-gphy.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/brcm,bcm63268-gphy.yaml: maintainers:0: 'TBD' does not match '@'
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
Error: Documentation/devicetree/bindings/net/brcm,bcm63268-gphy.example.dts:26.39-40 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/net/brcm,bcm63268-gphy.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1511: dt_binding_check] Error 2
make: *** [Makefile:251: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250228002722.5619-4-kylehendrydev@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.