From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Decide the in-driver logic based on whether the nocsr reset is present
and defer checking the appropriateness of that to dt-bindings to save
on boilerplate.
Reset controller APIs are fine consuming a nullptr, so no additional
checks are necessary there.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Wenbin Yao <quic_wenbyao@quicinc.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 17 ++++-------------
1 file changed, 4 insertions(+), 13 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 873f2f9844c6..219266125cf2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -2793,8 +2793,6 @@ struct qmp_phy_cfg {
bool skip_start_delay;
- bool has_nocsr_reset;
-
/* QMP PHY pipe clock interface rate */
unsigned long pipe_clock_rate;
@@ -3685,7 +3683,6 @@ static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
- .has_nocsr_reset = true,
/* 20MHz PHY AUX Clock */
.aux_clock_rate = 20000000,
@@ -3718,7 +3715,6 @@ static const struct qmp_phy_cfg sm8650_qmp_gen4x2_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
- .has_nocsr_reset = true,
/* 20MHz PHY AUX Clock */
.aux_clock_rate = 20000000,
@@ -3836,7 +3832,6 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x2_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
- .has_nocsr_reset = true,
};
static const struct qmp_phy_cfg x1e80100_qmp_gen4x4_pciephy_cfg = {
@@ -3870,7 +3865,6 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x4_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
- .has_nocsr_reset = true,
};
static const struct qmp_phy_cfg x1e80100_qmp_gen4x8_pciephy_cfg = {
@@ -3902,7 +3896,6 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x8_pciephy_cfg = {
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
- .has_nocsr_reset = true,
};
static void qmp_pcie_init_port_b(struct qmp_pcie *qmp, const struct qmp_phy_cfg_tbls *tbls)
@@ -4203,12 +4196,10 @@ static int qmp_pcie_reset_init(struct qmp_pcie *qmp)
if (ret)
return dev_err_probe(dev, ret, "failed to get resets\n");
- if (cfg->has_nocsr_reset) {
- qmp->nocsr_reset = devm_reset_control_get_exclusive(dev, "phy_nocsr");
- if (IS_ERR(qmp->nocsr_reset))
- return dev_err_probe(dev, PTR_ERR(qmp->nocsr_reset),
- "failed to get no-csr reset\n");
- }
+ qmp->nocsr_reset = devm_reset_control_get_optional_exclusive(dev, "phy_nocsr");
+ if (IS_ERR(qmp->nocsr_reset))
+ return dev_err_probe(dev, PTR_ERR(qmp->nocsr_reset),
+ "failed to get no-csr reset\n");
return 0;
}
--
2.34.1
© 2016 - 2025 Red Hat, Inc.