Document DSI controller and phy on SA8775P platform.

Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
---
 .../display/msm/qcom,sa8775p-mdss.yaml        | 170 ++++++++++++++++++
 1 file changed, 170 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
index a90a8b3f1a9e..25b65dda90ed 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
@@ -52,6 +52,22 @@ patternProperties:
         items:
           - const: qcom,sa8775p-dp
 
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sa8775p-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,sa8775p-dsi-phy-5nm
+          - qcom,sa8775p-edp-phy
+
 required:
   - compatible
 
@@ -158,6 +174,160 @@ examples:
             };
         };
 
+        dsi@ae94000 {
+            compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&mdss0_dsi0_phy 0>, <&mdss0_dsi0_phy 1>;
+            phys = <&mdss0_dsi0_phy>;
+
+            operating-points-v2 = <&dsi0_opp_table>;
+            power-domains = <&rpmhpd SA8775P_MMCX>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint { };
+                };
+            };
+
+            dsi0_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss0_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sa8775p-dsi-phy-5nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x27c>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&mdss0_dsi1_phy 0>, <&mdss0_dsi1_phy 1>;
+            phys = <&mdss0_dsi1_phy>;
+
+            operating-points-v2 = <&dsi1_opp_table>;
+            power-domains = <&rpmhpd SA8775P_MMCX>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi1_out: endpoint { };
+                };
+            };
+
+            dsi1_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss0_dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sa8775p-dsi-phy-5nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x27c>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
         displayport-controller@af54000 {
             compatible = "qcom,sa8775p-dp";
 
-- 
2.34.1

On Tue, 25 Feb 2025 17:48:16 +0530, Ayushi Makhija wrote:
> Document DSI controller and phy on SA8775P platform.
> 
> Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
> ---
>  .../display/msm/qcom,sa8775p-mdss.yaml        | 170 ++++++++++++++++++
>  1 file changed, 170 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml: ^dsi@[0-9a-f]+$: Missing additionalProperties/unevaluatedProperties constraint

/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml: ^phy@[0-9a-f]+$: Missing additionalProperties/unevaluatedProperties constraint

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250225121824.3869719-4-quic_amakhija@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.