Patchset fixes these:
- Enable temperature measurement in probe again
- Prevent reading temperature with asserted reset
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
---
Changes in v2:
- Add comment in mv88q2xxx_config_init why the temperature sensor is
enabled again (Stefan)
- Fix commit message by adding the information why the PHY reset might
be asserted. (Andrew)
- Remove fixes tags (Andrew)
- Switch to net-next (Andrew)
- Return ENETDOWN instead of EIO when PHYs reset is asserted in
mv88q2xxx_hwmon_read (Andrew)
- Add check if PHYs reset is asserted in mv88q2xxx_hwmon_write as it was
done in mv88q2xxx_hwmon_read
- Link to v1: https://lore.kernel.org/r/20250218-marvell-88q2xxx-hwmon-enable-at-probe-v1-0-999a304c8a11@gmail.com
---
Dimitri Fedrau (2):
net: phy: marvell-88q2xxx: Enable temperature measurement in probe again
net: phy: marvell-88q2xxx: Prevent hwmon access with asserted reset
drivers/net/phy/marvell-88q2xxx.c | 26 +++++++++++++++++++++++++-
1 file changed, 25 insertions(+), 1 deletion(-)
---
base-commit: 13260df23f5c0097f632c36fcd568ee33aa6a621
change-id: 20250217-marvell-88q2xxx-hwmon-enable-at-probe-2a2666325985
Best regards,
--
Dimitri Fedrau <dima.fedrau@gmail.com>