Adding reference to the missing series (see below).
On 19.02.2025 18:12, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Hi,
>
> Series add fixes for the Renesas USBHS driver identified while
> working on the Renesas USB PHY driver (series at [1]).
>
> Series (with [1] on top) was tested on Renesas RZ/G3S with consecutive
> unbind/bind and data transfer tests before/after the unbind/bind.
>
> The unbind/bind was also tested on the devices with the following
> device trees but w/o checking the data transfer (as I only had
> remote access w/o USB devices connected):
> - r8a7742-iwg21d-q7.dts
> - r8a7743-iwg20d-q7.dts
> - r8a7744-iwg20d-q7.dts
> - r8a7745-iwg22d-sodimm.dts
> - r8a77470-iwg23s-sbc.dts
> - r8a774a1-hihope-rzg2m-ex.dts
> - r8a774b1-hihope-rzg2n-ex.dts
> - r8a774e1-hihope-rzg2h-ex.dts
> - r9a07g043u11-smarc.dts
> - r9a07g044c2-smarc.dts
> - r9a07g044l2-smarc.dts
> - r9a07g054l2-smarc.dts
> - r9a07g043f01-smarc.dts
>
> Please give it a try also on your devices with [1] on top as well.
[1]
https://lore.kernel.org/all/20250219160749.1750797-1-claudiu.beznea.uj@bp.renesas.com
>
> Thank you,
> Claudiu Beznea
>
> Claudiu Beznea (3):
> usb: renesas_usbhs: Call clk_put()
> usb: renesas_usbhs: Use devm_usb_get_phy()
> usb: renesas_usbhs: Flush the notify_hotplug_work
>
> drivers/usb/renesas_usbhs/common.c | 6 +++++-
> drivers/usb/renesas_usbhs/mod_gadget.c | 2 +-
> 2 files changed, 6 insertions(+), 2 deletions(-)
>