This is my attempt at trying to sort out the mess I've created with the RTL9300
switch dt-bindings. Some context is available on [1] and [2].

The first patch just moves the binding from mfd/ to net/ (with an adjustment of
the internal path name). The next two patches are successors to patches already
sent as part of the series [3]. Finally the last two patches are needed to
update the in-tree dts to pass `make dtbs_check`, I couldn't figure out a clean
way of decoupling these `make dtbs_check` will either complain that the dts has
unexpected properties or that it is missing required properties.

[1] - https://lore.kernel.org/lkml/20250204-eccentric-deer-of-felicity-02b7ee@krzk-bin/
[2] - https://lore.kernel.org/lkml/4e3c5d83-d215-4eff-bf02-6d420592df8f@alliedtelesis.co.nz/
[3] - https://lore.kernel.org/lkml/20250204030249.1965444-1-chris.packham@alliedtelesis.co.nz/

Chris Packham (5):
  dt-bindings: net: Move realtek,rtl9301-switch to net
  dt-bindings: net: Add switch ports and interrupts to RTL9300
  dt-bindings: net: Add Realtek MDIO controller
  mips: dts: realtek: Add switch interrupts
  mips: dts: cameo-rtl9302c: Add switch block

 .../bindings/net/realtek,rtl9301-mdio.yaml    | 86 +++++++++++++++++++
 .../{mfd => net}/realtek,rtl9301-switch.yaml  | 63 +++++++++++++-
 .../cameo-rtl9302c-2x-rtl8224-2xge.dts        | 48 +++++++++++
 arch/mips/boot/dts/realtek/rtl930x.dtsi       |  3 +
 4 files changed, 199 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml
 rename Documentation/devicetree/bindings/{mfd => net}/realtek,rtl9301-switch.yaml (66%)

-- 
2.48.1