Add bitfields for PHY_CMN_CLK_CFG0 and PHY_CMN_CLK_CFG1 registers to
avoid hard-coding bit masks and shifts and make the code a bit more
readable. While touching the lines in dsi_7nm_pll_save_state()
resulting cached->pix_clk_div assignment would be too big, so just
combine pix_clk_div and bit_clk_div into one cached state to make
everything simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v3:
1. Use FIELD_GET
2. Keep separate bit_clk_div and pix_clk_div
3. Rebase (some things moved to previous patches)
Changes in v2:
1. New patch
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 12 +++++++-----
drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml | 1 +
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 798168180c1ab6c96ec2384f854302720cb27932..a8a5b41b63fb78348038c8f9fbb141aab2b07c7a 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -572,11 +572,11 @@ static void dsi_7nm_pll_save_state(struct msm_dsi_phy *phy)
cached->pll_out_div &= 0x3;
cmn_clk_cfg0 = readl(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0);
- cached->bit_clk_div = cmn_clk_cfg0 & 0xf;
- cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4;
+ cached->bit_clk_div = FIELD_GET(DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_3_0__MASK, cmn_clk_cfg0);
+ cached->pix_clk_div = FIELD_GET(DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_7_4__MASK, cmn_clk_cfg0);
cmn_clk_cfg1 = readl(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
- cached->pll_mux = cmn_clk_cfg1 & 0x3;
+ cached->pll_mux = cmn_clk_cfg1 & DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK;
DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x",
pll_7nm->phy->id, cached->pll_out_div, cached->bit_clk_div,
@@ -598,7 +598,8 @@ static int dsi_7nm_pll_restore_state(struct msm_dsi_phy *phy)
dsi_pll_cmn_clk_cfg0_write(pll_7nm,
DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_3_0(cached->bit_clk_div) |
DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_7_4(cached->pix_clk_div));
- dsi_pll_cmn_clk_cfg1_update(pll_7nm, 0x3, cached->pll_mux);
+ dsi_pll_cmn_clk_cfg1_update(pll_7nm, DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK,
+ cached->pll_mux);
ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw,
pll_7nm->vco_current_rate,
@@ -739,7 +740,8 @@ static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm, struct clk_hw **provide
u32 data;
data = readl(pll_7nm->phy->base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
- writel(data | 3, pll_7nm->phy->base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
+ writel(data | DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK,
+ pll_7nm->phy->base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
phy_pll_out_dsi_parent = pll_post_out_div;
} else {
diff --git a/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml b/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml
index 35f7f40e405b7dd9687725eae754522a7136725e..d2c8c46bb04159da6e539bfe80a4b5dc9ffdf367 100644
--- a/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml
+++ b/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml
@@ -17,6 +17,7 @@ xsi:schemaLocation="https://gitlab.freedesktop.org/freedreno/ rules-fd.xsd">
<bitfield name="CLK_EN" pos="5" type="boolean"/>
<bitfield name="CLK_EN_SEL" pos="4" type="boolean"/>
<bitfield name="BITCLK_SEL" low="2" high="3" type="uint"/>
+ <bitfield name="DSICLK_SEL" low="0" high="1" type="uint"/>
</reg32>
<reg32 offset="0x00018" name="GLBL_CTRL"/>
<reg32 offset="0x0001c" name="RBUF_CTRL"/>
--
2.43.0
On 14/02/2025 16:08, Krzysztof Kozlowski wrote: > Add bitfields for PHY_CMN_CLK_CFG0 and PHY_CMN_CLK_CFG1 registers to > avoid hard-coding bit masks and shifts and make the code a bit more > readable. While touching the lines in dsi_7nm_pll_save_state() > resulting cached->pix_clk_div assignment would be too big, so just > combine pix_clk_div and bit_clk_div into one cached state to make > everything simpler. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Changes in v3: > 1. Use FIELD_GET I have LKP build reports here, so this or some earlier patches need bitfield.h header. Best regards, Krzysztof
On Fri, Feb 14, 2025 at 04:08:44PM +0100, Krzysztof Kozlowski wrote:
> Add bitfields for PHY_CMN_CLK_CFG0 and PHY_CMN_CLK_CFG1 registers to
> avoid hard-coding bit masks and shifts and make the code a bit more
> readable. While touching the lines in dsi_7nm_pll_save_state()
> resulting cached->pix_clk_div assignment would be too big, so just
> combine pix_clk_div and bit_clk_div into one cached state to make
> everything simpler.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Changes in v3:
> 1. Use FIELD_GET
> 2. Keep separate bit_clk_div and pix_clk_div
> 3. Rebase (some things moved to previous patches)
>
> Changes in v2:
> 1. New patch
> ---
> drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 12 +++++++-----
> drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml | 1 +
> 2 files changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> index 798168180c1ab6c96ec2384f854302720cb27932..a8a5b41b63fb78348038c8f9fbb141aab2b07c7a 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> @@ -572,11 +572,11 @@ static void dsi_7nm_pll_save_state(struct msm_dsi_phy *phy)
> cached->pll_out_div &= 0x3;
>
> cmn_clk_cfg0 = readl(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0);
> - cached->bit_clk_div = cmn_clk_cfg0 & 0xf;
> - cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4;
> + cached->bit_clk_div = FIELD_GET(DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_3_0__MASK, cmn_clk_cfg0);
> + cached->pix_clk_div = FIELD_GET(DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_7_4__MASK, cmn_clk_cfg0);
>
> cmn_clk_cfg1 = readl(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
> - cached->pll_mux = cmn_clk_cfg1 & 0x3;
> + cached->pll_mux = cmn_clk_cfg1 & DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK;
FIELD_GET.
>
> DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x",
> pll_7nm->phy->id, cached->pll_out_div, cached->bit_clk_div,
> @@ -598,7 +598,8 @@ static int dsi_7nm_pll_restore_state(struct msm_dsi_phy *phy)
> dsi_pll_cmn_clk_cfg0_write(pll_7nm,
> DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_3_0(cached->bit_clk_div) |
> DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_7_4(cached->pix_clk_div));
> - dsi_pll_cmn_clk_cfg1_update(pll_7nm, 0x3, cached->pll_mux);
> + dsi_pll_cmn_clk_cfg1_update(pll_7nm, DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK,
> + cached->pll_mux);
DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL(cached->pll_mux)
>
> ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw,
> pll_7nm->vco_current_rate,
> @@ -739,7 +740,8 @@ static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm, struct clk_hw **provide
> u32 data;
>
> data = readl(pll_7nm->phy->base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
> - writel(data | 3, pll_7nm->phy->base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
> + writel(data | DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK,
data | DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL(3)
> + pll_7nm->phy->base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
>
> phy_pll_out_dsi_parent = pll_post_out_div;
> } else {
> diff --git a/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml b/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml
> index 35f7f40e405b7dd9687725eae754522a7136725e..d2c8c46bb04159da6e539bfe80a4b5dc9ffdf367 100644
> --- a/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml
> +++ b/drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml
> @@ -17,6 +17,7 @@ xsi:schemaLocation="https://gitlab.freedesktop.org/freedreno/ rules-fd.xsd">
> <bitfield name="CLK_EN" pos="5" type="boolean"/>
> <bitfield name="CLK_EN_SEL" pos="4" type="boolean"/>
> <bitfield name="BITCLK_SEL" low="2" high="3" type="uint"/>
> + <bitfield name="DSICLK_SEL" low="0" high="1" type="uint"/>
> </reg32>
> <reg32 offset="0x00018" name="GLBL_CTRL"/>
> <reg32 offset="0x0001c" name="RBUF_CTRL"/>
>
> --
> 2.43.0
>
--
With best wishes
Dmitry
On 14/02/2025 16:20, Dmitry Baryshkov wrote:
> On Fri, Feb 14, 2025 at 04:08:44PM +0100, Krzysztof Kozlowski wrote:
>> Add bitfields for PHY_CMN_CLK_CFG0 and PHY_CMN_CLK_CFG1 registers to
>> avoid hard-coding bit masks and shifts and make the code a bit more
>> readable. While touching the lines in dsi_7nm_pll_save_state()
>> resulting cached->pix_clk_div assignment would be too big, so just
>> combine pix_clk_div and bit_clk_div into one cached state to make
>> everything simpler.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>
>> ---
>>
>> Changes in v3:
>> 1. Use FIELD_GET
>> 2. Keep separate bit_clk_div and pix_clk_div
>> 3. Rebase (some things moved to previous patches)
>>
>> Changes in v2:
>> 1. New patch
>> ---
>> drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 12 +++++++-----
>> drivers/gpu/drm/msm/registers/display/dsi_phy_7nm.xml | 1 +
>> 2 files changed, 8 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
>> index 798168180c1ab6c96ec2384f854302720cb27932..a8a5b41b63fb78348038c8f9fbb141aab2b07c7a 100644
>> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
>> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
>> @@ -572,11 +572,11 @@ static void dsi_7nm_pll_save_state(struct msm_dsi_phy *phy)
>> cached->pll_out_div &= 0x3;
>>
>> cmn_clk_cfg0 = readl(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG0);
>> - cached->bit_clk_div = cmn_clk_cfg0 & 0xf;
>> - cached->pix_clk_div = (cmn_clk_cfg0 & 0xf0) >> 4;
>> + cached->bit_clk_div = FIELD_GET(DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_3_0__MASK, cmn_clk_cfg0);
>> + cached->pix_clk_div = FIELD_GET(DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_7_4__MASK, cmn_clk_cfg0);
>>
>> cmn_clk_cfg1 = readl(phy_base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
>> - cached->pll_mux = cmn_clk_cfg1 & 0x3;
>> + cached->pll_mux = cmn_clk_cfg1 & DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK;
>
> FIELD_GET.
Ack
>
>>
>> DBG("DSI PLL%d outdiv %x bit_clk_div %x pix_clk_div %x pll_mux %x",
>> pll_7nm->phy->id, cached->pll_out_div, cached->bit_clk_div,
>> @@ -598,7 +598,8 @@ static int dsi_7nm_pll_restore_state(struct msm_dsi_phy *phy)
>> dsi_pll_cmn_clk_cfg0_write(pll_7nm,
>> DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_3_0(cached->bit_clk_div) |
>> DSI_7nm_PHY_CMN_CLK_CFG0_DIV_CTRL_7_4(cached->pix_clk_div));
>> - dsi_pll_cmn_clk_cfg1_update(pll_7nm, 0x3, cached->pll_mux);
>> + dsi_pll_cmn_clk_cfg1_update(pll_7nm, DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK,
>> + cached->pll_mux);
>
> DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL(cached->pll_mux)
>
>>
>> ret = dsi_pll_7nm_vco_set_rate(phy->vco_hw,
>> pll_7nm->vco_current_rate,
>> @@ -739,7 +740,8 @@ static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm, struct clk_hw **provide
>> u32 data;
>>
>> data = readl(pll_7nm->phy->base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
>> - writel(data | 3, pll_7nm->phy->base + REG_DSI_7nm_PHY_CMN_CLK_CFG1);
>> + writel(data | DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL__MASK,
>
> data | DSI_7nm_PHY_CMN_CLK_CFG1_DSICLK_SEL(3)
Ack
Best regards,
Krzysztof
© 2016 - 2025 Red Hat, Inc.