Add support for generic bit reset device.

Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
---
 drivers/reset/reset-simple.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
index 276067839830..a24f8fcc6a06 100644
--- a/drivers/reset/reset-simple.c
+++ b/drivers/reset/reset-simple.c
@@ -148,6 +148,9 @@ static const struct of_device_id reset_simple_dt_ids[] = {
 		.data = &reset_simple_active_low },
 	{ .compatible = "brcm,bcm4908-misc-pcie-reset",
 		.data = &reset_simple_active_low },
+	{ .compatible = "reset-simple-high" },
+	{ .compatible = "reset-simple-low",
+		.data = &reset_simple_active_low },
 	{ .compatible = "snps,dw-high-reset" },
 	{ .compatible = "snps,dw-low-reset",
 		.data = &reset_simple_active_low },
-- 
2.48.1

On Thu, Feb 13, 2025 at 10:08:55AM +0800, Inochi Amaoto wrote:
> Add support for generic bit reset device.
> 
> Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
> ---
>  drivers/reset/reset-simple.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
> index 276067839830..a24f8fcc6a06 100644
> --- a/drivers/reset/reset-simple.c
> +++ b/drivers/reset/reset-simple.c
> @@ -148,6 +148,9 @@ static const struct of_device_id reset_simple_dt_ids[] = {
>  		.data = &reset_simple_active_low },
>  	{ .compatible = "brcm,bcm4908-misc-pcie-reset",
>  		.data = &reset_simple_active_low },
> +	{ .compatible = "reset-simple-high" },
> +	{ .compatible = "reset-simple-low",
> +		.data = &reset_simple_active_low },

So what is the point of the binding?

Best regards,
Krzysztof

On Thu, Feb 13, 2025 at 10:36:14AM +0100, Krzysztof Kozlowski wrote:
> On Thu, Feb 13, 2025 at 10:08:55AM +0800, Inochi Amaoto wrote:
> > Add support for generic bit reset device.
> > 
> > Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
> > ---
> >  drivers/reset/reset-simple.c | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c
> > index 276067839830..a24f8fcc6a06 100644
> > --- a/drivers/reset/reset-simple.c
> > +++ b/drivers/reset/reset-simple.c
> > @@ -148,6 +148,9 @@ static const struct of_device_id reset_simple_dt_ids[] = {
> >  		.data = &reset_simple_active_low },
> >  	{ .compatible = "brcm,bcm4908-misc-pcie-reset",
> >  		.data = &reset_simple_active_low },
> > +	{ .compatible = "reset-simple-high" },
> > +	{ .compatible = "reset-simple-low",
> > +		.data = &reset_simple_active_low },
> 
> So what is the point of the binding?
> 

I wanted to add these comptaibles as a base to avoid adding
too many compatible in driver.

Regards,
Inochi