In order to enable USB Type-C VBUS support on the SDM845 platform add
device node for the USB Vbus regulator to the PMI8998 PMIC device tree.

Signed-off-by: James A. MacInnes <james.a.macinnes@gmail.com>
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index cd3f0790fd42..8cb1d851b5a3 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -29,6 +29,12 @@ pmi8998_charger: charger@1000 {
 			status = "disabled";
 		};
 
+		pmi8998_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pmi8998-vbus-reg";
+			status = "disabled";
+			reg = <0x1100>;
+		};
+
 		pmi8998_gpios: gpio@c000 {
 			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
-- 
2.43.0