[PATCH 0/2] Add power monitor support on sama7d65-curiosity board

Mihai Sain posted 2 patches 12 months ago
.../dts/microchip/at91-sama7d65_curiosity.dts | 52 +++++++++++++++++++
arch/arm/boot/dts/microchip/sama7d65.dtsi     | 21 ++++++++
2 files changed, 73 insertions(+)
[PATCH 0/2] Add power monitor support on sama7d65-curiosity board
Posted by Mihai Sain 12 months ago
This patch series adds power monitor support on Microchip SAMA7D65 Curiosity board.

[root@SAMA7D65 ~]$ lsiio
Device 001: pac1934
Device 000: e1000000.adc

[root@SAMA7D65 ~]$ awk -f pac1934.awk
VDD3V3   current: 146.173 mA, voltage: 3302.73 mV
VDDIODDR current: 62.1356 mA, voltage: 1353.96 mV
VDDCORE  current: 242.248 mA, voltage: 1204.36 mV
VDDCPU   current: 213.565 mA, voltage: 1303.05 mV

Mihai Sain (2):
  ARM: dts: microchip: sama7d65: Add flexcom 10 node
  ARM: dts: microchip: sama7d65_curiosity: Add power monitor support

 .../dts/microchip/at91-sama7d65_curiosity.dts | 52 +++++++++++++++++++
 arch/arm/boot/dts/microchip/sama7d65.dtsi     | 21 ++++++++
 2 files changed, 73 insertions(+)


base-commit: febbc555cf0fff895546ddb8ba2c9a523692fb55
-- 
2.48.1
Re: [PATCH 0/2] Add power monitor support on sama7d65-curiosity board
Posted by Claudiu Beznea 11 months, 3 weeks ago

On 11.02.2025 16:33, Mihai Sain wrote:
> Mihai Sain (2):
>   ARM: dts: microchip: sama7d65: Add flexcom 10 node
>   ARM: dts: microchip: sama7d65_curiosity: Add power monitor support

Applied to at91-dt (with some small adjustments, please check), thanks!
Re: [PATCH 0/2] Add power monitor support on sama7d65-curiosity board
Posted by Rob Herring (Arm) 12 months ago
On Tue, 11 Feb 2025 16:33:00 +0200, Mihai Sain wrote:
> This patch series adds power monitor support on Microchip SAMA7D65 Curiosity board.
> 
> [root@SAMA7D65 ~]$ lsiio
> Device 001: pac1934
> Device 000: e1000000.adc
> 
> [root@SAMA7D65 ~]$ awk -f pac1934.awk
> VDD3V3   current: 146.173 mA, voltage: 3302.73 mV
> VDDIODDR current: 62.1356 mA, voltage: 1353.96 mV
> VDDCORE  current: 242.248 mA, voltage: 1204.36 mV
> VDDCPU   current: 213.565 mA, voltage: 1303.05 mV
> 
> Mihai Sain (2):
>   ARM: dts: microchip: sama7d65: Add flexcom 10 node
>   ARM: dts: microchip: sama7d65_curiosity: Add power monitor support
> 
>  .../dts/microchip/at91-sama7d65_curiosity.dts | 52 +++++++++++++++++++
>  arch/arm/boot/dts/microchip/sama7d65.dtsi     | 21 ++++++++
>  2 files changed, 73 insertions(+)
> 
> 
> base-commit: febbc555cf0fff895546ddb8ba2c9a523692fb55
> --
> 2.48.1
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/microchip/' for 20250211143302.4102-1-mihai.sain@microchip.com:

arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dtb: flexcom@e2824000: compatible: 'oneOf' conditional failed, one must be fixed:
	['microchip,sama7d65-flexcom', 'atmel,sama5d2-flexcom'] is too long
	'atmel,sama5d2-flexcom' was expected
	'microchip,sam9x7-flexcom' was expected
	'microchip,sama7g5-flexcom' was expected
	from schema $id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml#
arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dtb: /soc/flexcom@e2824000: failed to match any schema with compatible: ['microchip,sama7d65-flexcom', 'atmel,sama5d2-flexcom']