[v1] can: flexcan: add transceiver capabilities

[PATCH 0/2] can: flexcan: add transceiver capabilities

Dimitri Fedrau via B4 Relay posted 2 patches 12 months ago

Diff against v2 v3 v4 v4
Download series mbox

There is a newer version of this series

.../devicetree/bindings/net/can/fsl,flexcan.yaml   |  3 +++
drivers/net/can/flexcan/flexcan-core.c             | 25 ++++++++++++++++------
drivers/net/can/flexcan/flexcan.h                  |  1 +
3 files changed, 23 insertions(+), 6 deletions(-)

Expand all Fold all

[PATCH 0/2] can: flexcan: add transceiver capabilities

Posted by Dimitri Fedrau via B4 Relay 12 months ago

Currently the flexcan driver does not support adding PHYs. Add the
capability to ensure that the PHY is in operational state when the link
is set to an "up" state.

Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
---
Dimitri Fedrau (2):
      dt-bindings: can: fsl,flexcan: add transceiver capabilities
      can: flexcan: add transceiver capabilities

 .../devicetree/bindings/net/can/fsl,flexcan.yaml   |  3 +++
 drivers/net/can/flexcan/flexcan-core.c             | 25 ++++++++++++++++------
 drivers/net/can/flexcan/flexcan.h                  |  1 +
 3 files changed, 23 insertions(+), 6 deletions(-)
---
base-commit: 25cc469d6d344f5772e9fb6a5cf9d82a690afe68
change-id: 20241209-flexcan-add-transceiver-caps-7cff9400c926

Best regards,
-- 
Dimitri Fedrau <dimitri.fedrau@liebherr.com>