Both the TI SN65DSI83 and SN65DSI84 bridges have an IRQ pin to signal
errors using interrupt.

This interrupt is not documented in the binding.

Add the missing interrupts property.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml       | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index bad6f5c81b06..9b5f3f3eab19 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -35,6 +35,9 @@ properties:
   vcc-supply:
     description: A 1.8V power supply (see regulator/regulator.yaml).
 
+  interrupts:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-- 
2.48.1

On Mon, 10 Feb 2025 14:26:16 +0100, Herve Codina wrote:
> Both the TI SN65DSI83 and SN65DSI84 bridges have an IRQ pin to signal
> errors using interrupt.
> 
> This interrupt is not documented in the binding.
> 
> 
> [ ... ]

Reviewed-by: Maxime Ripard <mripard@kernel.org>

Thanks!
Maxime