Documentation/ABI/testing/configfs-usb-gadget-midi2 | 2 +- Documentation/input/devices/elantech.rst | 2 +- Documentation/nvme/nvme-pci-endpoint-target.rst | 2 +- Documentation/sound/soc/machine.rst | 2 +- Documentation/usb/gadget-testing.rst | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-)
Fixed some spelling issues in documentations.
Signed-off-by: Armin <Armin.Mahdilou@gmail.com>
---
Documentation/ABI/testing/configfs-usb-gadget-midi2 | 2 +-
Documentation/input/devices/elantech.rst | 2 +-
Documentation/nvme/nvme-pci-endpoint-target.rst | 2 +-
Documentation/sound/soc/machine.rst | 2 +-
Documentation/usb/gadget-testing.rst | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-midi2 b/Documentation/ABI/testing/configfs-usb-gadget-midi2
index 0eac3aaba137..d76a52e2ca7f 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-midi2
+++ b/Documentation/ABI/testing/configfs-usb-gadget-midi2
@@ -47,7 +47,7 @@ Description:
midi1_first_group The first UMP Group number for MIDI 1.0 (0-15)
midi1_num_groups The number of groups for MIDI 1.0 (0-16)
ui_hint 0: unknown, 1: receiver, 2: sender, 3: both
- midi_ci_verison Supported MIDI-CI version number (8 bit)
+ midi_ci_version Supported MIDI-CI version number (8 bit)
is_midi1 Legacy MIDI 1.0 device (0, 1 or 2)
sysex8_streams Max number of SysEx8 streams (8 bit)
active Active FB flag (0 or 1)
diff --git a/Documentation/input/devices/elantech.rst b/Documentation/input/devices/elantech.rst
index c3374a7ce7af..98163a258b83 100644
--- a/Documentation/input/devices/elantech.rst
+++ b/Documentation/input/devices/elantech.rst
@@ -556,7 +556,7 @@ Note on debounce:
In case the box has unstable power supply or other electricity issues, or
when number of finger changes, F/W would send "debounce packet" to inform
driver that the hardware is in debounce status.
-The debouce packet has the following signature::
+The debounce packet has the following signature::
byte 0: 0xc4
byte 1: 0xff
diff --git a/Documentation/nvme/nvme-pci-endpoint-target.rst b/Documentation/nvme/nvme-pci-endpoint-target.rst
index 66e7b7d869b4..b699595d1762 100644
--- a/Documentation/nvme/nvme-pci-endpoint-target.rst
+++ b/Documentation/nvme/nvme-pci-endpoint-target.rst
@@ -86,7 +86,7 @@ configurable through configfs before starting the controller. To avoid issues
with excessive local memory usage for executing commands, MDTS defaults to 512
KB and is limited to a maximum of 2 MB (arbitrary limit).
-Mimimum number of PCI Address Mapping Windows Required
+Minimum number of PCI Address Mapping Windows Required
------------------------------------------------------
Most PCI endpoint controllers provide a limited number of mapping windows for
diff --git a/Documentation/sound/soc/machine.rst b/Documentation/sound/soc/machine.rst
index 9db132bc0070..1828f5edca3e 100644
--- a/Documentation/sound/soc/machine.rst
+++ b/Documentation/sound/soc/machine.rst
@@ -75,7 +75,7 @@ In the above struct, dai’s are registered using names but you can pass
either dai name or device tree node but not both. Also, names used here
for cpu/codec/platform dais should be globally unique.
-Additionaly below example macro can be used to register cpu, codec and
+Additionally below example macro can be used to register cpu, codec and
platform dai::
SND_SOC_DAILINK_DEFS(wm2200_cpu_dsp,
diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst
index bf555c2270f5..1998dc146c56 100644
--- a/Documentation/usb/gadget-testing.rst
+++ b/Documentation/usb/gadget-testing.rst
@@ -1050,7 +1050,7 @@ Its attributes are:
midi1_num_groups The number of groups for MIDI 1.0 (0-16)
ui_hint UI-hint of this FB
0: unknown, 1: receiver, 2: sender, 3: both
- midi_ci_verison Supported MIDI-CI version number (8 bit)
+ midi_ci_version Supported MIDI-CI version number (8 bit)
is_midi1 Legacy MIDI 1.0 device (0-2)
0: MIDI 2.0 device,
1: MIDI 1.0 without restriction, or
--
2.47.2
Armin <armin.mahdilou@gmail.com> writes: > Fixed some spelling issues in documentations. > > Signed-off-by: Armin <Armin.Mahdilou@gmail.com> Could I please get a version of this with your full name in the SOB? Otherwise the patch seems fine. Thanks, jon
Fixed some spelling issues in documentations.
Signed-off-by: Armin Mahdilou <Armin.Mahdilou@gmail.com>
---
Thanks the Ack and Review. This is my first patch for the kernel.
Fixed SOB.
Regards
Documentation/ABI/testing/configfs-usb-gadget-midi2 | 2 +-
Documentation/input/devices/elantech.rst | 2 +-
Documentation/nvme/nvme-pci-endpoint-target.rst | 2 +-
Documentation/sound/soc/machine.rst | 2 +-
Documentation/usb/gadget-testing.rst | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-midi2 b/Documentation/ABI/testing/configfs-usb-gadget-midi2
index 0eac3aaba137..d76a52e2ca7f 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-midi2
+++ b/Documentation/ABI/testing/configfs-usb-gadget-midi2
@@ -47,7 +47,7 @@ Description:
midi1_first_group The first UMP Group number for MIDI 1.0 (0-15)
midi1_num_groups The number of groups for MIDI 1.0 (0-16)
ui_hint 0: unknown, 1: receiver, 2: sender, 3: both
- midi_ci_verison Supported MIDI-CI version number (8 bit)
+ midi_ci_version Supported MIDI-CI version number (8 bit)
is_midi1 Legacy MIDI 1.0 device (0, 1 or 2)
sysex8_streams Max number of SysEx8 streams (8 bit)
active Active FB flag (0 or 1)
diff --git a/Documentation/input/devices/elantech.rst b/Documentation/input/devices/elantech.rst
index c3374a7ce7af..98163a258b83 100644
--- a/Documentation/input/devices/elantech.rst
+++ b/Documentation/input/devices/elantech.rst
@@ -556,7 +556,7 @@ Note on debounce:
In case the box has unstable power supply or other electricity issues, or
when number of finger changes, F/W would send "debounce packet" to inform
driver that the hardware is in debounce status.
-The debouce packet has the following signature::
+The debounce packet has the following signature::
byte 0: 0xc4
byte 1: 0xff
diff --git a/Documentation/nvme/nvme-pci-endpoint-target.rst b/Documentation/nvme/nvme-pci-endpoint-target.rst
index 66e7b7d869b4..b699595d1762 100644
--- a/Documentation/nvme/nvme-pci-endpoint-target.rst
+++ b/Documentation/nvme/nvme-pci-endpoint-target.rst
@@ -86,7 +86,7 @@ configurable through configfs before starting the controller. To avoid issues
with excessive local memory usage for executing commands, MDTS defaults to 512
KB and is limited to a maximum of 2 MB (arbitrary limit).
-Mimimum number of PCI Address Mapping Windows Required
+Minimum number of PCI Address Mapping Windows Required
------------------------------------------------------
Most PCI endpoint controllers provide a limited number of mapping windows for
diff --git a/Documentation/sound/soc/machine.rst b/Documentation/sound/soc/machine.rst
index 9db132bc0070..1828f5edca3e 100644
--- a/Documentation/sound/soc/machine.rst
+++ b/Documentation/sound/soc/machine.rst
@@ -75,7 +75,7 @@ In the above struct, dai’s are registered using names but you can pass
either dai name or device tree node but not both. Also, names used here
for cpu/codec/platform dais should be globally unique.
-Additionaly below example macro can be used to register cpu, codec and
+Additionally below example macro can be used to register cpu, codec and
platform dai::
SND_SOC_DAILINK_DEFS(wm2200_cpu_dsp,
diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst
index bf555c2270f5..1998dc146c56 100644
--- a/Documentation/usb/gadget-testing.rst
+++ b/Documentation/usb/gadget-testing.rst
@@ -1050,7 +1050,7 @@ Its attributes are:
midi1_num_groups The number of groups for MIDI 1.0 (0-16)
ui_hint UI-hint of this FB
0: unknown, 1: receiver, 2: sender, 3: both
- midi_ci_verison Supported MIDI-CI version number (8 bit)
+ midi_ci_version Supported MIDI-CI version number (8 bit)
is_midi1 Legacy MIDI 1.0 device (0-2)
0: MIDI 2.0 device,
1: MIDI 1.0 without restriction, or
--
2.47.2
Armin Mahdilou <armin.mahdilou@gmail.com> writes: > Fixed some spelling issues in documentations. > > Signed-off-by: Armin Mahdilou <Armin.Mahdilou@gmail.com> > --- > Thanks the Ack and Review. This is my first patch for the kernel. > Fixed SOB. > > Regards > > Documentation/ABI/testing/configfs-usb-gadget-midi2 | 2 +- > Documentation/input/devices/elantech.rst | 2 +- > Documentation/nvme/nvme-pci-endpoint-target.rst | 2 +- > Documentation/sound/soc/machine.rst | 2 +- > Documentation/usb/gadget-testing.rst | 2 +- > 5 files changed, 5 insertions(+), 5 deletions(-) Applied, thanks. jon
On Mon, 2025-02-10 at 20:25 +0100, Armin Mahdilou wrote: > Fixed some spelling issues in documentations. > > Signed-off-by: Armin Mahdilou <Armin.Mahdilou@gmail.com> Hi all, Just a kind reminder about this patch. I would like to know the status of it and as it's my first patch, I want to know how can I track if it's merged or not. Thanks in advance. Regards, Armin
Armin Mahdilou <armin.mahdilou@gmail.com> writes: > On Mon, 2025-02-10 at 20:25 +0100, Armin Mahdilou wrote: >> Fixed some spelling issues in documentations. >> >> Signed-off-by: Armin Mahdilou <Armin.Mahdilou@gmail.com> > Hi all, > > Just a kind reminder about this patch. > I would like to know the status of it and as it's my first patch, > I want to know how can I track if it's merged or not. > Thanks in advance. It's in my queue, please be patient. It would have been good for you to add Randy's ack when you reposted it; I can fix that when I apply it. Thanks, jon
On 2/9/25 8:17 PM, Armin wrote: > Fixed some spelling issues in documentations. > > Signed-off-by: Armin <Armin.Mahdilou@gmail.com> Looks good. Thanks. Acked-by: Randy Dunlap <rdunlap@infradead.org> > --- > Documentation/ABI/testing/configfs-usb-gadget-midi2 | 2 +- > Documentation/input/devices/elantech.rst | 2 +- > Documentation/nvme/nvme-pci-endpoint-target.rst | 2 +- > Documentation/sound/soc/machine.rst | 2 +- > Documentation/usb/gadget-testing.rst | 2 +- > 5 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/Documentation/ABI/testing/configfs-usb-gadget-midi2 b/Documentation/ABI/testing/configfs-usb-gadget-midi2 > index 0eac3aaba137..d76a52e2ca7f 100644 > --- a/Documentation/ABI/testing/configfs-usb-gadget-midi2 > +++ b/Documentation/ABI/testing/configfs-usb-gadget-midi2 > @@ -47,7 +47,7 @@ Description: > midi1_first_group The first UMP Group number for MIDI 1.0 (0-15) > midi1_num_groups The number of groups for MIDI 1.0 (0-16) > ui_hint 0: unknown, 1: receiver, 2: sender, 3: both > - midi_ci_verison Supported MIDI-CI version number (8 bit) > + midi_ci_version Supported MIDI-CI version number (8 bit) > is_midi1 Legacy MIDI 1.0 device (0, 1 or 2) > sysex8_streams Max number of SysEx8 streams (8 bit) > active Active FB flag (0 or 1) > diff --git a/Documentation/input/devices/elantech.rst b/Documentation/input/devices/elantech.rst > index c3374a7ce7af..98163a258b83 100644 > --- a/Documentation/input/devices/elantech.rst > +++ b/Documentation/input/devices/elantech.rst > @@ -556,7 +556,7 @@ Note on debounce: > In case the box has unstable power supply or other electricity issues, or > when number of finger changes, F/W would send "debounce packet" to inform > driver that the hardware is in debounce status. > -The debouce packet has the following signature:: > +The debounce packet has the following signature:: > > byte 0: 0xc4 > byte 1: 0xff > diff --git a/Documentation/nvme/nvme-pci-endpoint-target.rst b/Documentation/nvme/nvme-pci-endpoint-target.rst > index 66e7b7d869b4..b699595d1762 100644 > --- a/Documentation/nvme/nvme-pci-endpoint-target.rst > +++ b/Documentation/nvme/nvme-pci-endpoint-target.rst > @@ -86,7 +86,7 @@ configurable through configfs before starting the controller. To avoid issues > with excessive local memory usage for executing commands, MDTS defaults to 512 > KB and is limited to a maximum of 2 MB (arbitrary limit). > > -Mimimum number of PCI Address Mapping Windows Required > +Minimum number of PCI Address Mapping Windows Required > ------------------------------------------------------ > > Most PCI endpoint controllers provide a limited number of mapping windows for > diff --git a/Documentation/sound/soc/machine.rst b/Documentation/sound/soc/machine.rst > index 9db132bc0070..1828f5edca3e 100644 > --- a/Documentation/sound/soc/machine.rst > +++ b/Documentation/sound/soc/machine.rst > @@ -75,7 +75,7 @@ In the above struct, dai’s are registered using names but you can pass > either dai name or device tree node but not both. Also, names used here > for cpu/codec/platform dais should be globally unique. > > -Additionaly below example macro can be used to register cpu, codec and > +Additionally below example macro can be used to register cpu, codec and > platform dai:: > > SND_SOC_DAILINK_DEFS(wm2200_cpu_dsp, > diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst > index bf555c2270f5..1998dc146c56 100644 > --- a/Documentation/usb/gadget-testing.rst > +++ b/Documentation/usb/gadget-testing.rst > @@ -1050,7 +1050,7 @@ Its attributes are: > midi1_num_groups The number of groups for MIDI 1.0 (0-16) > ui_hint UI-hint of this FB > 0: unknown, 1: receiver, 2: sender, 3: both > - midi_ci_verison Supported MIDI-CI version number (8 bit) > + midi_ci_version Supported MIDI-CI version number (8 bit) > is_midi1 Legacy MIDI 1.0 device (0-2) > 0: MIDI 2.0 device, > 1: MIDI 1.0 without restriction, or -- ~Randy
© 2016 - 2026 Red Hat, Inc.