Add device tree bindings for the pin controller included in the
BCM21664 chip. The bindings are based off brcm,bcm11351-pinctrl.yaml;
both chips use the same driver, but have different pins, and the
BCM21664 has 6 alt modes instead of 4.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
 .../bindings/pinctrl/brcm,bcm21664-pinctrl.yaml    | 169 +++++++++++++++++++++
 1 file changed, 169 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..233bea91b640ffa8480637d7304f661b7a4f5d79
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm21664-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM21664 pin controller
+
+maintainers:
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm21664-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '-grp[0-9]$':
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          pins:
+            description:
+              Specifies the name(s) of one or more pins to be configured by
+              this node.
+            items:
+              enum: [ adcsyn, batrm, bsc1clk, bsc1dat, camcs0, camcs1, clk32k,
+                      clk_cx8, dclk1, dclk4, dclkreq1, dclkreq4, dmic0clk,
+                      dmic0dq, dsi0te, gpio00, gpio01, gpio02, gpio03, gpio04,
+                      gpio05, gpio06, gpio07, gpio08, gpio09, gpio10, gpio11,
+                      gpio12, gpio13, gpio14, gpio15, gpio16, gpio17, gpio18,
+                      gpio19, gpio20, gpio21, gpio22, gpio23, gpio24, gpio25,
+                      gpio26, gpio27, gpio28, gpio32, gpio33, gpio34, gpio93,
+                      gpio94, gps_calreq, gps_hostreq, gps_pablank, gps_tmark,
+                      icusbdm, icusbdp, lcdcs0, lcdres, lcdscl, lcdsda, lcdte,
+                      mdmgpio00, mdmgpio01, mdmgpio02, mdmgpio03, mdmgpio04,
+                      mdmgpio05, mdmgpio06, mdmgpio07, mdmgpio08, mmc0ck,
+                      mmc0cmd, mmc0dat0, mmc0dat1, mmc0dat2, mmc0dat3, mmc0dat4,
+                      mmc0dat5, mmc0dat6, mmc0dat7, mmc0rst, mmc1ck, mmc1cmd,
+                      mmc1dat0, mmc1dat1, mmc1dat2, mmc1dat3, mmc1dat4,
+                      mmc1dat5, mmc1dat6, mmc1dat7, mmc1rst, pc1, pc2, pmbscclk,
+                      pmbscdat, pmuint, resetn, rfst2g_mtsloten3g,
+                      rtxdata2g_txdata3g1, rtxen2g_txdata3g2, rxdata3g0,
+                      rxdata3g1, rxdata3g2, sdck, sdcmd, sddat0, sddat1, sddat2,
+                      sddat3, simclk, simdat, simdet, simrst, spi0clk, spi0fss,
+                      spi0rxd, spi0txd, sri_c, sri_d, sri_e, sspck, sspdi,
+                      sspdo, sspsyn, stat1, stat2, swclktck, swdiotms, sysclken,
+                      tdi, tdo, testmode, traceclk, tracedt00, tracedt01,
+                      tracedt02, tracedt03, tracedt04, tracedt05, tracedt06,
+                      tracedt07, tracedt08, tracedt09, tracedt10, tracedt11,
+                      tracedt12, tracedt13, tracedt14, tracedt15, trstb,
+                      txdata3g0, ubctsn, ubrtsn, ubrx, ubtx ]
+
+          function:
+            description:
+              Specifies the pin mux selection.
+            enum: [ alt1, alt2, alt3, alt4, alt5, alt6 ]
+
+          slew-rate:
+            description: |
+              Meaning depends on configured pin mux:
+                bsc*clk/pmbscclk or bsc*dat/pmbscdat:
+                  0: Standard (100 kbps) & Fast (400 kbps) mode
+                  1: Highspeed (3.4 Mbps) mode
+                Otherwise:
+                  0: fast slew rate
+                  1: normal slew rate
+
+          bias-disable: true
+          bias-pull-up: true
+          input-disable: true
+          input-enable: true
+
+        required:
+          - pins
+
+        allOf:
+          - $ref: pincfg-node.yaml#
+
+          # Optional properties for standard pins
+          - if:
+              properties:
+                pins:
+                  contains:
+                    enum: [ adcsyn, batrm, camcs0, camcs1, clk32k, clk_cx8,
+                            dclk1, dclk4, dclkreq1, dclkreq4, dmic0clk, dmic0dq,
+                            dsi0te, gpio00, gpio01, gpio02, gpio03, gpio04,
+                            gpio05, gpio06, gpio07, gpio08, gpio09, gpio10,
+                            gpio11, gpio12, gpio13, gpio14, gpio15, gpio18,
+                            gpio19, gpio20, gpio21, gpio22, gpio23, gpio24,
+                            gpio25, gpio26, gpio27, gpio28, gpio32, gpio33,
+                            gpio34, gpio93, gpio94, gps_calreq, gps_hostreq,
+                            gps_pablank, gps_tmark, icusbdm, icusbdp, lcdcs0,
+                            lcdres, lcdscl, lcdsda, lcdte, mdmgpio00, mdmgpio01,
+                            mdmgpio02, mdmgpio03, mdmgpio04, mdmgpio05,
+                            mdmgpio06, mdmgpio07, mdmgpio08, mmc0ck, mmc0cmd,
+                            mmc0dat0, mmc0dat1, mmc0dat2, mmc0dat3, mmc0dat4,
+                            mmc0dat5, mmc0dat6, mmc0dat7, mmc0rst, mmc1ck,
+                            mmc1cmd, mmc1dat0, mmc1dat1, mmc1dat2, mmc1dat3,
+                            mmc1dat4, mmc1dat5, mmc1dat6, mmc1dat7, mmc1rst,
+                            pc1, pc2, pmuint, resetn, rfst2g_mtsloten3g,
+                            rtxdata2g_txdata3g1, rtxen2g_txdata3g2, rxdata3g0,
+                            rxdata3g1, rxdata3g2, sdck, sdcmd, sddat0, sddat1,
+                            sddat2, sddat3, simclk, simdat, simdet, simrst,
+                            spi0clk, spi0fss, spi0rxd, spi0txd, sri_c, sri_d,
+                            sri_e, sspck, sspdi, sspdo, sspsyn, stat1, stat2,
+                            swclktck, swdiotms, sysclken, tdi, tdo, testmode,
+                            traceclk, tracedt00, tracedt01, tracedt02,
+                            tracedt03, tracedt04, tracedt05, tracedt06,
+                            tracedt07, tracedt08, tracedt09, tracedt10,
+                            tracedt11, tracedt12, tracedt13, tracedt14,
+                            tracedt15, trstb, txdata3g0, ubctsn, ubrtsn, ubrx,
+                            ubtx ]
+            then:
+              properties:
+                drive-strength:
+                  enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ]
+
+                bias-pull-down: true
+                input-schmitt-enable: true
+                input-schmitt-disable: true
+
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pinctrl@35004800 {
+      compatible = "brcm,bcm21664-pinctrl";
+      reg = <0x35004800 0x7f0>;
+
+      dev-a-active-pins {
+        /* group node defining 1 standard pin */
+        std-grp0 {
+          pins = "gpio00";
+          function = "alt1";
+          input-schmitt-enable;
+          bias-disable;
+          slew-rate = <1>;
+          drive-strength = <4>;
+        };
+
+        /* group node defining 2 I2C pins */
+        i2c-grp0 {
+          pins = "bsc1clk", "bsc1dat";
+          function = "alt2";
+          bias-pull-up = <720>;
+          input-enable;
+        };
+      };
+    };
+...

-- 
2.48.1

On Fri, Feb 07, 2025 at 09:02:40PM +0100, Artur Weber wrote:
> Add device tree bindings for the pin controller included in the
> BCM21664 chip. The bindings are based off brcm,bcm11351-pinctrl.yaml;
> both chips use the same driver, but have different pins, and the
> BCM21664 has 6 alt modes instead of 4.
> 
> Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
> ---
>  .../bindings/pinctrl/brcm,bcm21664-pinctrl.yaml    | 169 +++++++++++++++++++++
>  1 file changed, 169 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..233bea91b640ffa8480637d7304f661b7a4f5d79
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
> @@ -0,0 +1,169 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm21664-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM21664 pin controller
> +
> +maintainers:
> +  - Florian Fainelli <florian.fainelli@broadcom.com>
> +  - Ray Jui <rjui@broadcom.com>
> +  - Scott Branden <sbranden@broadcom.com>
> +
> +allOf:
> +  - $ref: pinctrl.yaml#
> +
> +properties:
> +  compatible:
> +    const: brcm,bcm21664-pinctrl
> +
> +  reg:
> +    maxItems: 1
> +
> +patternProperties:
> +  '-pins$':
> +    type: object
> +    additionalProperties: false
> +
> +    patternProperties:
> +      '-grp[0-9]$':
> +        type: object
> +        unevaluatedProperties: false
> +
> +        properties:
> +          pins:
> +            description:
> +              Specifies the name(s) of one or more pins to be configured by
> +              this node.
> +            items:
> +              enum: [ adcsyn, batrm, bsc1clk, bsc1dat, camcs0, camcs1, clk32k,
> +                      clk_cx8, dclk1, dclk4, dclkreq1, dclkreq4, dmic0clk,
> +                      dmic0dq, dsi0te, gpio00, gpio01, gpio02, gpio03, gpio04,
> +                      gpio05, gpio06, gpio07, gpio08, gpio09, gpio10, gpio11,
> +                      gpio12, gpio13, gpio14, gpio15, gpio16, gpio17, gpio18,
> +                      gpio19, gpio20, gpio21, gpio22, gpio23, gpio24, gpio25,
> +                      gpio26, gpio27, gpio28, gpio32, gpio33, gpio34, gpio93,
> +                      gpio94, gps_calreq, gps_hostreq, gps_pablank, gps_tmark,
> +                      icusbdm, icusbdp, lcdcs0, lcdres, lcdscl, lcdsda, lcdte,
> +                      mdmgpio00, mdmgpio01, mdmgpio02, mdmgpio03, mdmgpio04,
> +                      mdmgpio05, mdmgpio06, mdmgpio07, mdmgpio08, mmc0ck,
> +                      mmc0cmd, mmc0dat0, mmc0dat1, mmc0dat2, mmc0dat3, mmc0dat4,
> +                      mmc0dat5, mmc0dat6, mmc0dat7, mmc0rst, mmc1ck, mmc1cmd,
> +                      mmc1dat0, mmc1dat1, mmc1dat2, mmc1dat3, mmc1dat4,
> +                      mmc1dat5, mmc1dat6, mmc1dat7, mmc1rst, pc1, pc2, pmbscclk,
> +                      pmbscdat, pmuint, resetn, rfst2g_mtsloten3g,
> +                      rtxdata2g_txdata3g1, rtxen2g_txdata3g2, rxdata3g0,
> +                      rxdata3g1, rxdata3g2, sdck, sdcmd, sddat0, sddat1, sddat2,
> +                      sddat3, simclk, simdat, simdet, simrst, spi0clk, spi0fss,
> +                      spi0rxd, spi0txd, sri_c, sri_d, sri_e, sspck, sspdi,
> +                      sspdo, sspsyn, stat1, stat2, swclktck, swdiotms, sysclken,
> +                      tdi, tdo, testmode, traceclk, tracedt00, tracedt01,
> +                      tracedt02, tracedt03, tracedt04, tracedt05, tracedt06,
> +                      tracedt07, tracedt08, tracedt09, tracedt10, tracedt11,
> +                      tracedt12, tracedt13, tracedt14, tracedt15, trstb,
> +                      txdata3g0, ubctsn, ubrtsn, ubrx, ubtx ]
> +
> +          function:
> +            description:
> +              Specifies the pin mux selection.
> +            enum: [ alt1, alt2, alt3, alt4, alt5, alt6 ]
> +
> +          slew-rate:
> +            description: |
> +              Meaning depends on configured pin mux:
> +                bsc*clk/pmbscclk or bsc*dat/pmbscdat:
> +                  0: Standard (100 kbps) & Fast (400 kbps) mode
> +                  1: Highspeed (3.4 Mbps) mode
> +                Otherwise:
> +                  0: fast slew rate
> +                  1: normal slew rate
> +
> +          bias-disable: true
> +          bias-pull-up: true
> +          input-disable: true
> +          input-enable: true

With unevaluateProperties, these have no effect.

> +
> +        required:
> +          - pins
> +
> +        allOf:
> +          - $ref: pincfg-node.yaml#
> +
> +          # Optional properties for standard pins
> +          - if:
> +              properties:
> +                pins:
> +                  contains:
> +                    enum: [ adcsyn, batrm, camcs0, camcs1, clk32k, clk_cx8,
> +                            dclk1, dclk4, dclkreq1, dclkreq4, dmic0clk, dmic0dq,
> +                            dsi0te, gpio00, gpio01, gpio02, gpio03, gpio04,
> +                            gpio05, gpio06, gpio07, gpio08, gpio09, gpio10,
> +                            gpio11, gpio12, gpio13, gpio14, gpio15, gpio18,
> +                            gpio19, gpio20, gpio21, gpio22, gpio23, gpio24,
> +                            gpio25, gpio26, gpio27, gpio28, gpio32, gpio33,
> +                            gpio34, gpio93, gpio94, gps_calreq, gps_hostreq,
> +                            gps_pablank, gps_tmark, icusbdm, icusbdp, lcdcs0,
> +                            lcdres, lcdscl, lcdsda, lcdte, mdmgpio00, mdmgpio01,
> +                            mdmgpio02, mdmgpio03, mdmgpio04, mdmgpio05,
> +                            mdmgpio06, mdmgpio07, mdmgpio08, mmc0ck, mmc0cmd,
> +                            mmc0dat0, mmc0dat1, mmc0dat2, mmc0dat3, mmc0dat4,
> +                            mmc0dat5, mmc0dat6, mmc0dat7, mmc0rst, mmc1ck,
> +                            mmc1cmd, mmc1dat0, mmc1dat1, mmc1dat2, mmc1dat3,
> +                            mmc1dat4, mmc1dat5, mmc1dat6, mmc1dat7, mmc1rst,
> +                            pc1, pc2, pmuint, resetn, rfst2g_mtsloten3g,
> +                            rtxdata2g_txdata3g1, rtxen2g_txdata3g2, rxdata3g0,
> +                            rxdata3g1, rxdata3g2, sdck, sdcmd, sddat0, sddat1,
> +                            sddat2, sddat3, simclk, simdat, simdet, simrst,
> +                            spi0clk, spi0fss, spi0rxd, spi0txd, sri_c, sri_d,
> +                            sri_e, sspck, sspdi, sspdo, sspsyn, stat1, stat2,
> +                            swclktck, swdiotms, sysclken, tdi, tdo, testmode,
> +                            traceclk, tracedt00, tracedt01, tracedt02,
> +                            tracedt03, tracedt04, tracedt05, tracedt06,
> +                            tracedt07, tracedt08, tracedt09, tracedt10,
> +                            tracedt11, tracedt12, tracedt13, tracedt14,
> +                            tracedt15, trstb, txdata3g0, ubctsn, ubrtsn, ubrx,
> +                            ubtx ]
> +            then:
> +              properties:
> +                drive-strength:
> +                  enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ]

Not sure this is worth the complexity. And actually, 'drive-strength' 
will be allowed on the pins not listed here and can have any value.

I would just move this to the main section and drop the if/then. You 
could list the subset of pins where 'drive-strength' is not valid 
instead and then put 'drive-strength: false'.

Rob