1. Patchew
  2. linux
  3. [PATCH 0/2] Enable panel and GPU on Fairphone 5
  4. View patch

[PATCH 1/2] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable display

Luca Weiss posted 2 patches 1 year ago
[PATCH 1/2] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable display
Posted by Luca Weiss 1 year ago 
Configure the MDSS nodes for the phone and add the panel node.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 94 ++++++++++++++++++++--
 1 file changed, 89 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index 389eca9b9e68187980e92ac921a77a3c3b54f6a5..965e32473a58ae4748e4cb748980fad1d2b06ab6 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -138,6 +138,34 @@ vreg_ois_dvdd_1p1: regulator-ois-dvdd-1p1 {
 		vin-supply = <&vreg_s8b>;
 	};
 
+	vreg_oled_dvdd: regulator-oled-dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "oled_dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_s1b>;
+
+		regulator-boot-on;
+	};
+
+	vreg_oled_vci: regulator-oled-vci {
+		compatible = "regulator-fixed";
+		regulator-name = "oled_vci";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_l13c>;
+
+		regulator-boot-on;
+	};
+
 	reserved-memory {
 		cont_splash_mem: cont-splash@e1000000 {
 			reg = <0x0 0xe1000000 0x0 0x2300000>;
@@ -597,11 +625,6 @@ eeprom@51 {
 	};
 };
 
-&dispcc {
-	/* Disable for now so simple-framebuffer continues working */
-	status = "disabled";
-};
-
 &gcc {
 	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
 			   <GCC_EDP_CLKREF_EN>,
@@ -733,6 +756,46 @@ &ipa {
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi {
+	vdda-supply = <&vreg_l6b>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		vci-supply = <&vreg_oled_vci>;
+		vddio-supply = <&vreg_l12c>;
+		dvdd-supply = <&vreg_oled_dvdd>;
+
+		pinctrl-0 = <&disp_reset_n_active>, <&mdp_vsync>;
+		pinctrl-1 = <&disp_reset_n_suspend>, <&mdp_vsync>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi_phy {
+	vdds-supply = <&vreg_l10c>;
+	status = "okay";
+};
+
 &pm7250b_adc {
 	pinctrl-0 = <&pm7250b_adc_default>;
 	pinctrl-names = "default";
@@ -1026,6 +1089,20 @@ bluetooth_enable_default: bluetooth-enable-default-state {
 		bias-disable;
 	};
 
+	disp_reset_n_active: disp-reset-n-active-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	disp_reset_n_suspend: disp-reset-n-suspend-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	hall_sensor_default: hall-sensor-default-state {
 		pins = "gpio155";
 		function = "gpio";
@@ -1033,6 +1110,13 @@ hall_sensor_default: hall-sensor-default-state {
 		bias-pull-up;
 	};
 
+	mdp_vsync: mdp-vsync-state {
+		pins = "gpio80";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
 	pm8008_int_default: pm8008-int-default-state {
 		pins = "gpio25";
 		function = "gpio";

-- 
2.48.1
Re: [PATCH 1/2] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable display
Posted by Marijn Suijten 1 year ago 
On 2025-02-02 23:45:51, Luca Weiss wrote:
> Configure the MDSS nodes for the phone and add the panel node.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>

Glad to hear (and see in real life) that you're able to use the 1:1:1 topology
patches.

Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>

Thanks!

> ---
>  arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 94 ++++++++++++++++++++--
>  1 file changed, 89 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> index 389eca9b9e68187980e92ac921a77a3c3b54f6a5..965e32473a58ae4748e4cb748980fad1d2b06ab6 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> @@ -138,6 +138,34 @@ vreg_ois_dvdd_1p1: regulator-ois-dvdd-1p1 {
>  		vin-supply = <&vreg_s8b>;
>  	};
>  
> +	vreg_oled_dvdd: regulator-oled-dvdd {
> +		compatible = "regulator-fixed";
> +		regulator-name = "oled_dvdd";
> +		regulator-min-microvolt = <1200000>;
> +		regulator-max-microvolt = <1200000>;
> +
> +		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		vin-supply = <&vreg_s1b>;
> +
> +		regulator-boot-on;
> +	};
> +
> +	vreg_oled_vci: regulator-oled-vci {
> +		compatible = "regulator-fixed";
> +		regulator-name = "oled_vci";
> +		regulator-min-microvolt = <3000000>;
> +		regulator-max-microvolt = <3000000>;
> +
> +		gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +
> +		vin-supply = <&vreg_l13c>;
> +
> +		regulator-boot-on;
> +	};
> +
>  	reserved-memory {
>  		cont_splash_mem: cont-splash@e1000000 {
>  			reg = <0x0 0xe1000000 0x0 0x2300000>;
> @@ -597,11 +625,6 @@ eeprom@51 {
>  	};
>  };
>  
> -&dispcc {
> -	/* Disable for now so simple-framebuffer continues working */
> -	status = "disabled";
> -};
> -
>  &gcc {
>  	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
>  			   <GCC_EDP_CLKREF_EN>,
> @@ -733,6 +756,46 @@ &ipa {
>  	status = "okay";
>  };
>  
> +&mdss {
> +	status = "okay";
> +};
> +
> +&mdss_dsi {
> +	vdda-supply = <&vreg_l6b>;
> +	status = "okay";
> +
> +	panel@0 {
> +		compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5";
> +		reg = <0>;
> +
> +		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
> +
> +		vci-supply = <&vreg_oled_vci>;
> +		vddio-supply = <&vreg_l12c>;
> +		dvdd-supply = <&vreg_oled_dvdd>;
> +
> +		pinctrl-0 = <&disp_reset_n_active>, <&mdp_vsync>;
> +		pinctrl-1 = <&disp_reset_n_suspend>, <&mdp_vsync>;
> +		pinctrl-names = "default", "sleep";
> +
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&mdss_dsi0_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&mdss_dsi0_out {
> +	data-lanes = <0 1 2 3>;
> +	remote-endpoint = <&panel_in>;
> +};
> +
> +&mdss_dsi_phy {
> +	vdds-supply = <&vreg_l10c>;
> +	status = "okay";
> +};
> +
>  &pm7250b_adc {
>  	pinctrl-0 = <&pm7250b_adc_default>;
>  	pinctrl-names = "default";
> @@ -1026,6 +1089,20 @@ bluetooth_enable_default: bluetooth-enable-default-state {
>  		bias-disable;
>  	};
>  
> +	disp_reset_n_active: disp-reset-n-active-state {
> +		pins = "gpio44";
> +		function = "gpio";
> +		drive-strength = <8>;
> +		bias-disable;
> +	};
> +
> +	disp_reset_n_suspend: disp-reset-n-suspend-state {
> +		pins = "gpio44";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-pull-down;
> +	};
> +
>  	hall_sensor_default: hall-sensor-default-state {
>  		pins = "gpio155";
>  		function = "gpio";
> @@ -1033,6 +1110,13 @@ hall_sensor_default: hall-sensor-default-state {
>  		bias-pull-up;
>  	};
>  
> +	mdp_vsync: mdp-vsync-state {
> +		pins = "gpio80";
> +		function = "mdp_vsync";
> +		drive-strength = <2>;
> +		bias-pull-down;
> +	};
> +
>  	pm8008_int_default: pm8008-int-default-state {
>  		pins = "gpio25";
>  		function = "gpio";
> 
> -- 
> 2.48.1
>
Re: [PATCH 1/2] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable display
Posted by Konrad Dybcio 1 year ago 
On 2.02.2025 11:45 PM, Luca Weiss wrote:
> Configure the MDSS nodes for the phone and add the panel node.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.