From: Arnd Bergmann <arnd@arndb.de>

The addition of target mode causes a build failure when CONFIG_I2C_SLAVE
is turned off:

drivers/i2c/busses/i2c-imx-lpi2c.c:1273:10: error: 'const struct i2c_algorithm' has no member named 'reg_target'
 1273 |         .reg_target     = lpi2c_imx_register_target,
      |          ^~~~~~~~~~
drivers/i2c/busses/i2c-imx-lpi2c.c:1274:10: error: 'const struct i2c_algorithm' has no member named 'unreg_target'
 1274 |         .unreg_target   = lpi2c_imx_unregister_target,
      |          ^~~~~~~~~~~~

Select the Kconfig symbol like we do for other similar drivers.

Fixes: 1ee867e465c1 ("i2c: imx-lpi2c: add target mode support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/i2c/busses/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 3fb1fa8244fb..60736a2831ba 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -756,6 +756,7 @@ config I2C_IMX
 config I2C_IMX_LPI2C
 	tristate "IMX Low Power I2C interface"
 	depends on ARCH_MXC || COMPILE_TEST
+	select I2C_SLAVE
 	help
 	  Say Y here if you want to use the Low Power IIC bus controller
 	  on the Freescale i.MX processors.
-- 
2.39.5

On Wed, Jan 22, 2025 at 07:48:36AM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> The addition of target mode causes a build failure when CONFIG_I2C_SLAVE
> is turned off:
> 
> drivers/i2c/busses/i2c-imx-lpi2c.c:1273:10: error: 'const struct i2c_algorithm' has no member named 'reg_target'
>  1273 |         .reg_target     = lpi2c_imx_register_target,
>       |          ^~~~~~~~~~
> drivers/i2c/busses/i2c-imx-lpi2c.c:1274:10: error: 'const struct i2c_algorithm' has no member named 'unreg_target'
>  1274 |         .unreg_target   = lpi2c_imx_unregister_target,
>       |          ^~~~~~~~~~~~
> 
> Select the Kconfig symbol like we do for other similar drivers.
> 
> Fixes: 1ee867e465c1 ("i2c: imx-lpi2c: add target mode support")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Applied to for-current, thanks!