ARM: dts: ti: davinci: Align GPIO hog name with bindings

[PATCH] ARM: dts: ti: davinci: Align GPIO hog name with bindings

Posted by Krzysztof Kozlowski 2 weeks, 6 days ago

Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warnings like:

  da850-lego-ev3.dtb: batt_volt_en: $nodename:0: 'batt_volt_en' does not match '^.+-hog(-[0-9]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
index 4df10379ff22..173401c58d53 100644
--- a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts
@@ -412,14 +412,14 @@ &gpio {
 	status = "okay";
 
 	/* Don't pull down battery voltage adc io channel */
-	batt_volt_en {
+	batt-volt-en-hog {
 		gpio-hog;
 		gpios = <6 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
 	/* Don't impede Bluetooth clock signal */
-	bt_clock_en {
+	bt-clock-en-hog {
 		gpio-hog;
 		gpios = <5 GPIO_ACTIVE_HIGH>;
 		input;
@@ -433,19 +433,19 @@ bt_clock_en {
 	 * anything, but they are present in the source code from LEGO.
 	 */
 
-	bt_pic_en {
+	bt-pic-en-hog {
 		gpio-hog;
 		gpios = <51 GPIO_ACTIVE_HIGH>;
 		output-low;
 	};
 
-	bt_pic_rst {
+	bt-pic-rst-hog {
 		gpio-hog;
 		gpios = <78 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
 
-	bt_pic_cts {
+	bt-pic-cts-hog {
 		gpio-hog;
 		gpios = <87 GPIO_ACTIVE_HIGH>;
 		input;
-- 
2.43.0

Re: [PATCH] ARM: dts: ti: davinci: Align GPIO hog name with bindings

Posted by Bartosz Golaszewski 2 days, 7 hours ago

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>


On Thu, 16 Jan 2025 10:00:30 +0100, Krzysztof Kozlowski wrote:
> Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
> to fix dtbs_check warnings like:
> 
>   da850-lego-ev3.dtb: batt_volt_en: $nodename:0: 'batt_volt_en' does not match '^.+-hog(-[0-9]+)?$'
> 
> 

Applied, thanks!

[1/1] ARM: dts: ti: davinci: Align GPIO hog name with bindings
      commit: 58abc69e479cf5b36c4fc4287a11c9d92d2ce4b8

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Re: [PATCH] ARM: dts: ti: davinci: Align GPIO hog name with bindings

Posted by David Lechner 2 weeks, 6 days ago

On 1/16/25 3:00 AM, Krzysztof Kozlowski wrote:
> Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
> to fix dtbs_check warnings like:
> 
>   da850-lego-ev3.dtb: batt_volt_en: $nodename:0: 'batt_volt_en' does not match '^.+-hog(-[0-9]+)?$'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
Acked-by: David Lechner <david@lechnology.com>