[PATCH 3/4] gpio: mxc: remove dead code after switch to DT-only

Ahmad Fatoum posted 4 patches 11 months, 1 week ago
[PATCH 3/4] gpio: mxc: remove dead code after switch to DT-only
Posted by Ahmad Fatoum 11 months, 1 week ago
struct platform_device::id was only set by board code, but since i.MX
became a devicetree-only platform, this will always be -1
(PLATFORM_DEVID_NONE).

Note: of_alias_get_id() returns a negative number on error and base
treats all negative errors the same, so we need not add any additional
error handling.

Fixes: 0f2c7af45d7e ("gpio: mxc: Convert the driver to DT-only")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/gpio/gpio-mxc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 4cb455b2bdee71ba4eb20c93567c3b8db100dbb2..619b6fb9d833a4bb94a93b4209f01b49ad1cbdb0 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -490,8 +490,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 	port->gc.request = mxc_gpio_request;
 	port->gc.free = mxc_gpio_free;
 	port->gc.to_irq = mxc_gpio_to_irq;
-	port->gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 :
-					     pdev->id * 32;
+	port->gc.base = of_alias_get_id(np, "gpio") * 32;
 
 	err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port);
 	if (err)

-- 
2.39.5
Re: [PATCH 3/4] gpio: mxc: remove dead code after switch to DT-only
Posted by Bartosz Golaszewski 11 months ago
On Mon, Jan 13, 2025 at 11:19 PM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
>
> struct platform_device::id was only set by board code, but since i.MX
> became a devicetree-only platform, this will always be -1
> (PLATFORM_DEVID_NONE).
>
> Note: of_alias_get_id() returns a negative number on error and base
> treats all negative errors the same, so we need not add any additional
> error handling.
>
> Fixes: 0f2c7af45d7e ("gpio: mxc: Convert the driver to DT-only")
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
>  drivers/gpio/gpio-mxc.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
> index 4cb455b2bdee71ba4eb20c93567c3b8db100dbb2..619b6fb9d833a4bb94a93b4209f01b49ad1cbdb0 100644
> --- a/drivers/gpio/gpio-mxc.c
> +++ b/drivers/gpio/gpio-mxc.c
> @@ -490,8 +490,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>         port->gc.request = mxc_gpio_request;
>         port->gc.free = mxc_gpio_free;
>         port->gc.to_irq = mxc_gpio_to_irq;
> -       port->gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 :
> -                                            pdev->id * 32;
> +       port->gc.base = of_alias_get_id(np, "gpio") * 32;
>
>         err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port);
>         if (err)
>
> --
> 2.39.5
>

This looks like I can pick it up separately from the rest? Is that right?

Bart
Re: [PATCH 3/4] gpio: mxc: remove dead code after switch to DT-only
Posted by Ahmad Fatoum 11 months ago
On 15.01.25 17:55, Bartosz Golaszewski wrote:
> On Mon, Jan 13, 2025 at 11:19 PM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
>>
>> struct platform_device::id was only set by board code, but since i.MX
>> became a devicetree-only platform, this will always be -1
>> (PLATFORM_DEVID_NONE).
>>
>> Note: of_alias_get_id() returns a negative number on error and base
>> treats all negative errors the same, so we need not add any additional
>> error handling.
>>
>> Fixes: 0f2c7af45d7e ("gpio: mxc: Convert the driver to DT-only")
>> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
>> ---
>>  drivers/gpio/gpio-mxc.c | 3 +--
>>  1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
>> index 4cb455b2bdee71ba4eb20c93567c3b8db100dbb2..619b6fb9d833a4bb94a93b4209f01b49ad1cbdb0 100644
>> --- a/drivers/gpio/gpio-mxc.c
>> +++ b/drivers/gpio/gpio-mxc.c
>> @@ -490,8 +490,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
>>         port->gc.request = mxc_gpio_request;
>>         port->gc.free = mxc_gpio_free;
>>         port->gc.to_irq = mxc_gpio_to_irq;
>> -       port->gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 :
>> -                                            pdev->id * 32;
>> +       port->gc.base = of_alias_get_id(np, "gpio") * 32;
>>
>>         err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port);
>>         if (err)
>>
>> --
>> 2.39.5
>>
> 
> This looks like I can pick it up separately from the rest? Is that right?

Yes, please do.

Thanks,
Ahmad

> 
> Bart
> 


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
Re: [PATCH 3/4] gpio: mxc: remove dead code after switch to DT-only
Posted by Andy Shevchenko 11 months, 1 week ago
On Tue, Jan 14, 2025 at 12:19 AM Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:
>
> struct platform_device::id was only set by board code, but since i.MX
> became a devicetree-only platform, this will always be -1
> (PLATFORM_DEVID_NONE).
>
> Note: of_alias_get_id() returns a negative number on error and base
> treats all negative errors the same, so we need not add any additional
> error handling.

This one is good,
Reviewed-by: Andy Shevchenko <andy@kernel.org>

-- 
With Best Regards,
Andy Shevchenko