Adds support for enabling pin out that is required
to generate periodic output signal on lan887x phy.
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
---
v1 -> v2
- Added support of periodic output only for the pinout that is specific
to PEROUT
---
drivers/net/phy/microchip_t1.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
index 73f28463bc35..551a057c516e 100644
--- a/drivers/net/phy/microchip_t1.c
+++ b/drivers/net/phy/microchip_t1.c
@@ -273,6 +273,9 @@
/* End offset of samples */
#define SQI_INLIERS_END (SQI_INLIERS_START + SQI_INLIERS_NUM)
+#define LAN887X_MX_CHIP_TOP_REG_CONTROL1 0xF002
+#define LAN887X_MX_CHIP_TOP_REG_CONTROL1_EVT_EN BIT(8)
+
#define DRIVER_AUTHOR "Nisar Sayed <nisar.sayed@microchip.com>"
#define DRIVER_DESC "Microchip LAN87XX/LAN937x/LAN887x T1 PHY driver"
@@ -1286,6 +1289,15 @@ static int lan887x_phy_init(struct phy_device *phydev)
if (IS_ERR(priv->clock))
return PTR_ERR(priv->clock);
+ /* Enable pin mux for EVT */
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
+ LAN887X_MX_CHIP_TOP_REG_CONTROL1,
+ LAN887X_MX_CHIP_TOP_REG_CONTROL1_EVT_EN,
+ LAN887X_MX_CHIP_TOP_REG_CONTROL1_EVT_EN);
+
+ /* Initialize pin numbers specific to PEROUT */
+ priv->clock->event_pin = 3;
+
priv->init_done = true;
}
--
2.17.1