Sync qspi flash setting to read-delay=2 and spi-max-frequency 100MHz for
better compatibility with operating system and downstream boot loader SPL
secondary program loader.

Signed-off-by: E Shattow <e@freeshell.de>
---
 arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index 55c6743100a7..651f9a602226 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -317,8 +317,8 @@ &qspi {
 	nor_flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		cdns,read-delay = <5>;
-		spi-max-frequency = <12000000>;
+		cdns,read-delay = <2>;
+		spi-max-frequency = <100000000>;
 		cdns,tshsl-ns = <1>;
 		cdns,tsd2d-ns = <1>;
 		cdns,tchsh-ns = <1>;
-- 
2.45.2

On 1/3/2025 3:45 AM, E Shattow wrote:
> Sync qspi flash setting to read-delay=2 and spi-max-frequency 100MHz for
> better compatibility with operating system and downstream boot loader SPL
> secondary program loader.
> 
> Signed-off-by: E Shattow <e@freeshell.de>
> ---
>  arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> index 55c6743100a7..651f9a602226 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> @@ -317,8 +317,8 @@ &qspi {
>  	nor_flash: flash@0 {
>  		compatible = "jedec,spi-nor";
>  		reg = <0>;
> -		cdns,read-delay = <5>;
> -		spi-max-frequency = <12000000>;
> +		cdns,read-delay = <2>;
> +		spi-max-frequency = <100000000>;
>  		cdns,tshsl-ns = <1>;
>  		cdns,tsd2d-ns = <1>;
>  		cdns,tchsh-ns = <1>;

Reviewed-by: Hal Feng <hal.feng@starfivetech.com>