Add an initial devicetree for the Huawei Matebook E Go, which is based on
sc8280xp.
There are 3 variants, Huawei released first 2 at the same time.
Huawei Matebook E Go LTE(sc8180x), codename should be gaokun2.
Huawei Matebook E Go(sc8280xp@3.0GHz), codename is gaokun3.
Huawei Matebook E Go 2023(sc8280xp@2.69GHz).
We add support for the latter two variants.
This work started by Tianyu Gao and Xuecong Chen, they made the
devicetree based on existing work(i.e. the Lenovo X13s and the
Qualcomm CRD), it can boot with framebuffer.
Original work: https://github.com/matalama80td3l/matebook-e-go-boot-works/blob/main/dts/sc8280xp-huawei-matebook-e-go.dts
Later, I got my device, I continue their work.
Supported features:
- adsp
- bluetooth (connect issue)
- charge (with a lower power)
- framebuffer
- gpu
- keyboard (via internal USB)
- pcie devices (wifi and nvme, no modem)
- speakers and microphones
- tablet mode switch
- touchscreen
- usb
- volume key and power key
Some key features not supported yet:
- battery and charger information report (EC driver required)
- built-in display (cannot enable backlight yet)
- charging thresholds control (EC driver required)
- camera
- LID switch detection (EC driver required)
- USB Type-C altmode (EC driver required)
- USB Type-C PD (EC driver required)
I have finished the EC driver, once this series are upstreamed,
I will submit a series of patches to enable EC support.
Co-developed-by: Tianyu Gao <gty0622@gmail.com>
Signed-off-by: Tianyu Gao <gty0622@gmail.com>
Co-developed-by: Xuecong Chen <chenxuecong2009@outlook.com>
Signed-off-by: Xuecong Chen <chenxuecong2009@outlook.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sc8280xp-huawei-gaokun3.dts | 1318 +++++++++++++++++
2 files changed, 1319 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6ca8db4b8..00d02cf5f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -195,6 +195,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-huawei-gaokun3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-microsoft-arcata.dtb
dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
new file mode 100644
index 000000000..09b95f89e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
@@ -0,0 +1,1318 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ *
+ * Copyright (c) 2024, Tianyu Gao <gty0622@gmail.com>
+ * Copyright (c) 2024, Xuecong Chen <chenxuecong2009@outlook.com>
+ *
+ * Copyright (c) 2024, Pengyu Luo <mitltlatltl@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+ chassis-type = "tablet";
+ model = "Matebook E Go";
+ compatible = "huawei,gaokun3", "qcom,sc8280xp";
+
+ aliases {
+ i2c4 = &i2c4;
+ serial1 = &uart2;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer0: framebuffer@c6200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0xc6200000 0x0 0x02400000>;
+ width = <1600>;
+ height = <2560>;
+ stride = <(1600 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ wcd938x: audio-codec {
+ compatible = "qcom,wcd9380-codec";
+
+ pinctrl-0 = <&wcd_default>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+ vdd-buck-supply = <&vreg_s10b>;
+ vdd-rxtx-supply = <&vreg_s10b>;
+ vdd-io-supply = <&vreg_s10b>;
+ vdd-mic-bias-supply = <&vreg_bob>;
+
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+ qcom,rx-device = <&wcd_rx>;
+ qcom,tx-device = <&wcd_tx>;
+
+ #sound-dai-cells = <1>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&mode_pin_active>, <&vol_up_n>;
+ pinctrl-names = "default";
+
+ key-vol-up {
+ label = "Volume Up";
+ gpios = <&pmc8280_1_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+
+ switch-mode {
+ label = "Tablet Mode Switch";
+ gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_TABLET_MODE>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ vreg_misc_3p3: regulator-misc-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3B";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&misc_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vreg_nvme: regulator-nvme {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3_SSD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&nvme_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VPH_VCC3R9";
+ regulator-min-microvolt = <3900000>;
+ regulator-max-microvolt = <3900000>;
+
+ regulator-always-on;
+ };
+
+ vreg_wlan: regulator-wlan {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC_WLAN_3R9";
+ regulator-min-microvolt = <3900000>;
+ regulator-max-microvolt = <3900000>;
+
+ gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&hastings_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ gpu_mem: gpu-mem@8bf00000 {
+ reg = <0 0x8bf00000 0 0x2000>;
+ no-map;
+ };
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x8000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
+ thermal-zones {
+ skin-temp-thermal {
+ polling-delay-passive = <250>;
+
+ thermal-sensors = <&pmk8280_adc_tm 5>;
+
+ trips {
+ skin_temp_alert0: trip-point0 {
+ temperature = <55000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin_temp_alert1: trip-point1 {
+ temperature = <58000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin-temp-crit {
+ temperature = <73000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&skin_temp_alert0>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&skin_temp_alert1>;
+ cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ wcn6855-pmu {
+ compatible = "qcom,wcn6855-pmu";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_default>, <&wlan_en>;
+
+ wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+ swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+ vddio-supply = <&vreg_s10b>;
+ vddaon-supply = <&vreg_s12b>;
+ vddpmu-supply = <&vreg_s12b>;
+ vddpmumx-supply = <&vreg_s12b>;
+ vddpmucx-supply = <&vreg_s12b>;
+ vddrfa0p95-supply = <&vreg_s12b>;
+ vddrfa1p3-supply = <&vreg_s11b>;
+ vddrfa1p9-supply = <&vreg_s1c>;
+ vddpcie1p3-supply = <&vreg_s11b>;
+ vddpcie1p9-supply = <&vreg_s1c>;
+
+ regulators {
+ vreg_pmu_rfa_cmn_0p8: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn_0p8";
+ };
+
+ vreg_pmu_aon_0p8: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p8";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p8: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p8";
+ };
+
+ vreg_pmu_btcmx_0p8: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p8";
+ };
+
+ vreg_pmu_pcie_1p8: ldo5 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo6 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_rfa_0p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo8 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo9 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-l1-l4-supply = <&vreg_s12b>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_s11b>;
+ vdd-l6-l9-l10-supply = <&vreg_s12b>;
+ vdd-l8-supply = <&vreg_s12b>;
+
+ vreg_s10b: smps10 {
+ regulator-name = "vreg_s10b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_s11b: smps11 {
+ regulator-name = "vreg_s11b";
+ regulator-min-microvolt = <1272000>;
+ regulator-max-microvolt = <1272000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s12b: smps12 {
+ regulator-name = "vreg_s12b";
+ regulator-min-microvolt = <984000>;
+ regulator-max-microvolt = <984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b: ldo1 {
+ regulator-name = "vreg_l1b";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b: ldo2 {
+ regulator-name = "vreg_l2b";
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b: ldo3 {
+ regulator-name = "vreg_l3b";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b: ldo4 {
+ regulator-name = "vreg_l4b";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b: ldo5 {
+ regulator-name = "vreg_l5b";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b: ldo6 {
+ regulator-name = "vreg_l6b";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b: ldo7 {
+ regulator-name = "vreg_l7b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-boot-on;
+ };
+
+ vreg_l9b: ldo9 {
+ regulator-name = "vreg_l9b";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-bob-supply = <&vreg_vph_pwr>;
+ vdd-l1-l12-supply = <&vreg_s1c>;
+ vdd-l2-l8-supply = <&vreg_s1c>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&vreg_s11b>;
+
+ vreg_s1c: smps1 {
+ regulator-name = "vreg_s1c";
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l1c: ldo1 {
+ regulator-name = "vreg_l1c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c: ldo8 {
+ regulator-name = "vreg_l8c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c: ldo12 {
+ regulator-name = "vreg_l12c";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13c: ldo13 {
+ regulator-name = "vreg_l13c";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-always-on;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-l4-supply = <&vreg_s11b>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_s11b>;
+ vdd-l6-l9-l10-supply = <&vreg_s12b>;
+ vdd-l8-supply = <&vreg_s12b>;
+
+ vreg_l2d: ldo2 {
+ regulator-name = "vreg_l2d";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3d: ldo3 {
+ regulator-name = "vreg_l3d";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4d: ldo4 {
+ regulator-name = "vreg_l4d";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6d: ldo6 {
+ regulator-name = "vreg_l6d";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7d: ldo7 {
+ regulator-name = "vreg_l7d";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8d: ldo8 {
+ regulator-name = "vreg_l8d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9d: ldo9 {
+ regulator-name = "vreg_l9d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10d: ldo10 {
+ regulator-name = "vreg_l10d";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&dispcc0 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcdxkmsuc8280.mbn";
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ pinctrl-0 = <&i2c4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ touchscreen@4f {
+ compatible = "hid-over-i2c";
+ reg = <0x4f>;
+
+ hid-descr-addr = <0x1>;
+ interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&vreg_misc_3p3>;
+ vddl-supply = <&vreg_s10b>;
+
+ pinctrl-0 = <&ts0_default>;
+ pinctrl-names = "default";
+ };
+
+};
+
+&mdss0 {
+ status = "okay";
+};
+
+&mdss0_dp0 {
+ status = "okay";
+};
+
+&mdss0_dp0_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+ status = "okay";
+};
+
+&mdss0_dp1_out {
+ data-lanes = <0 1>;
+ remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&pcie2a {
+ perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_nvme>;
+
+ pinctrl-0 = <&pcie2a_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie2a_phy {
+ vdda-phy-supply = <&vreg_l6d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ max-link-speed = <2>;
+
+ perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+ vddpe-3v3-supply = <&vreg_wlan>;
+
+ pinctrl-0 = <&pcie4_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie4_port0 {
+ wifi@0 {
+ compatible = "pci17cb,1103";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+ vddaon-supply = <&vreg_pmu_aon_0p8>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+ };
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l6d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+};
+
+&pmk8280_adc_tm {
+ status = "okay";
+
+ sys-therm@0 {
+ reg = <0>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@1 {
+ reg = <1>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@2 {
+ reg = <2>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@3 {
+ reg = <3>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@4 {
+ reg = <4>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@5 {
+ reg = <5>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@6 {
+ reg = <6>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+
+ sys-therm@7 {
+ reg = <7>;
+ io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+ qcom,hw-settle-time-us = <200>;
+ qcom,avg-samples = <2>;
+ qcom,ratiometric;
+ };
+};
+
+&pmk8280_pon_pwrkey {
+ status = "okay";
+};
+
+&pmk8280_pon_resin {
+ status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pmk8280_rtc {
+ nvmem-cells = <&rtc_offset>;
+ nvmem-cell-names = "offset";
+
+ status = "okay";
+};
+
+&pmk8280_sdam_6 {
+ status = "okay";
+
+ rtc_offset: rtc-offset@bc {
+ reg = <0xbc 0x4>;
+ };
+};
+
+&pmk8280_vadc {
+ channel@144 {
+ reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm1";
+ };
+
+ channel@145 {
+ reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm2";
+ };
+
+ channel@146 {
+ reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm3";
+ };
+
+ channel@147 {
+ reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm4";
+ };
+
+ channel@344 {
+ reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm5";
+ };
+
+ channel@345 {
+ reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm6";
+ };
+
+ channel@346 {
+ reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm7";
+ };
+
+ channel@347 {
+ reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+ qcom,hw-settle-time = <200>;
+ qcom,ratiometric;
+ label = "sys_therm8";
+ };
+};
+
+&qup0 {
+ status = "okay";
+};
+
+&qup1 {
+ status = "okay";
+};
+
+&qup2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcadsp8280.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_nsp0 {
+ firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qccdsp8280.mbn";
+
+ status = "okay";
+};
+
+&rxmacro {
+ status = "okay";
+};
+
+&sound {
+ compatible = "qcom,sc8280xp-sndcard";
+ model = "SC8280XP-HUAWEI-MATEBOOKEGO";
+ audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+ "SpkrRight IN", "WSA_SPK2 OUT",
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC2", "MIC BIAS3",
+ "VA DMIC0", "VA MIC BIAS1",
+ "VA DMIC1", "VA MIC BIAS1",
+ "VA DMIC2", "VA MIC BIAS3",
+ "TX SWR_ADC1", "ADC2_OUTPUT";
+
+ wcd-playback-dai-link {
+ link-name = "WCD Playback";
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wcd-capture-dai-link {
+ link-name = "WCD Capture";
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ codec {
+ sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ wsa-dai-link {
+ link-name = "WSA Playback";
+
+ cpu {
+ sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+ };
+
+ codec {
+ sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ va-dai-link {
+ link-name = "VA Capture";
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+
+ codec {
+ sound-dai = <&vamacro 0>;
+ };
+ };
+};
+
+&swr0 {
+ status = "okay";
+
+ left_spkr: wsa8830-left@0,1 {
+ compatible = "sdw10217020200";
+ reg = <0 1>;
+ pinctrl-0 = <&spkr_1_sd_n_default>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrLeft";
+ #sound-dai-cells = <0>;
+ vdd-supply = <&vreg_s10b>;
+ };
+
+ right_spkr: wsa8830-right@0,2 {
+ compatible = "sdw10217020200";
+ reg = <0 2>;
+ pinctrl-0 = <&spkr_2_sd_n_default>;
+ pinctrl-names = "default";
+ powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+ #thermal-sensor-cells = <0>;
+ sound-name-prefix = "SpkrRight";
+ #sound-dai-cells = <0>;
+ vdd-supply = <&vreg_s10b>;
+ };
+};
+
+&swr1 {
+ status = "okay";
+
+ wcd_rx: wcd9380-rx@0,4 {
+ compatible = "sdw20217010d00";
+ reg = <0 4>;
+ qcom,rx-port-mapping = <1 2 3 4 5>;
+ };
+};
+
+&swr2 {
+ status = "okay";
+
+ wcd_tx: wcd9380-tx@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ qcom,tx-port-mapping = <1 1 2 3>;
+ };
+};
+
+&txmacro {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn6855-bt";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+ vddaon-supply = <&vreg_pmu_aon_0p8>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+ max-speed = <3200000>;
+ };
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&usb_0_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_0_hsphy {
+ vdda-pll-supply = <&vreg_l9d>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l7d>;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy {
+ vdda-phy-supply = <&vreg_l9d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ orientation-switch;
+
+ status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+ remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l4b>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l13c>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vreg_l4b>;
+ vdda-pll-supply = <&vreg_l3b>;
+
+ orientation-switch;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+ remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_hsphy0 {
+ vdda-pll-supply = <&vreg_l1b>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l7d>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy1 {
+ vdda-pll-supply = <&vreg_l8d>;
+ vdda18-supply = <&vreg_l1c>;
+ vdda33-supply = <&vreg_l7d>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy2 {
+ vdda-pll-supply = <&vreg_l10d>;
+ vdda18-supply = <&vreg_l8c>;
+ vdda33-supply = <&vreg_l2d>;
+
+ status = "okay";
+};
+
+&usb_2_hsphy3 {
+ vdda-pll-supply = <&vreg_l10d>;
+ vdda18-supply = <&vreg_l8c>;
+ vdda33-supply = <&vreg_l2d>;
+
+ status = "okay";
+};
+
+&usb_2_qmpphy0 {
+ vdda-phy-supply = <&vreg_l1b>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+};
+
+&usb_2_qmpphy1 {
+ vdda-phy-supply = <&vreg_l8d>;
+ vdda-pll-supply = <&vreg_l4d>;
+
+ status = "okay";
+};
+
+&vamacro {
+ pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+ pinctrl-names = "default";
+
+ vdd-micb-supply = <&vreg_s10b>;
+
+ qcom,dmic-sample-rate = <4800000>;
+
+ status = "okay";
+};
+
+&wsamacro {
+ status = "okay";
+};
+
+&xo_board_clk {
+ clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+ status = "okay";
+};
+
+&pmc8280_1_gpios {
+ misc_3p3_reg_en: misc-3p3-reg-en-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+
+ vol_up_n: vol-up-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ input-enable;
+ bias-pull-up;
+ };
+};
+
+&pmr735a_gpios {
+ hastings_reg_en: hastings-reg-en-state {
+ pins = "gpio1";
+ function = "normal";
+ };
+};
+
+&tlmm {
+
+ gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 4>;
+
+ bt_default: bt-default-state {
+ hstp-bt-en-pins {
+ pins = "gpio133";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ hstp-sw-ctrl-pins {
+ pins = "gpio132";
+ function = "gpio";
+ bias-pull-down;
+ };
+ };
+
+ i2c4_default: i2c4-default-state {
+ pins = "gpio171", "gpio172";
+ function = "qup4";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mode_pin_active: mode-pin-state {
+ pins = "gpio26";
+ function = "gpio";
+ bias-disable;
+ };
+
+ nvme_reg_en: nvme-reg-en-state {
+ pins = "gpio135";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie2a_default: pcie2a-default-state {
+ clkreq-n-pins {
+ pins = "gpio142";
+ function = "pcie2a_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio143";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio145";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie4_default: pcie4-default-state {
+ clkreq-n-pins {
+ pins = "gpio140";
+ function = "pcie4_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio141";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio139";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ spkr_1_sd_n_default: spkr-1-sd-n-default-state {
+ perst-n-pins {
+ pins = "gpio178";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ spkr_2_sd_n_default: spkr-2-sd-n-default-state {
+ perst-n-pins {
+ pins = "gpio179";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ ts0_default: ts0-default-state {
+ int-n-pins {
+ pins = "gpio175";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ reset-n-pins {
+ pins = "gpio99";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ uart2_default: uart2-default-state {
+ cts-pins {
+ pins = "gpio121";
+ function = "qup2";
+ bias-bus-hold;
+ };
+
+ rts-pins {
+ pins = "gpio122";
+ function = "qup2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx-pins {
+ pins = "gpio124";
+ function = "qup2";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio123";
+ function = "qup2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ wcd_default: wcd-default-state {
+ reset-pins {
+ pins = "gpio106";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ wlan_en: wlan-en-state {
+ pins = "gpio134";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+};
--
2.47.1On 20.12.2024 5:05 PM, Pengyu Luo wrote:
> Add an initial devicetree for the Huawei Matebook E Go, which is based on
> sc8280xp.
>
> There are 3 variants, Huawei released first 2 at the same time.
> Huawei Matebook E Go LTE(sc8180x), codename should be gaokun2.
> Huawei Matebook E Go(sc8280xp@3.0GHz), codename is gaokun3.
> Huawei Matebook E Go 2023(sc8280xp@2.69GHz).
>
> We add support for the latter two variants.
>
> This work started by Tianyu Gao and Xuecong Chen, they made the
> devicetree based on existing work(i.e. the Lenovo X13s and the
> Qualcomm CRD), it can boot with framebuffer.
>
So this looks good now, but
[...]
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer0: framebuffer@c6200000 {
> + compatible = "simple-framebuffer";
> + reg = <0x0 0xc6200000 0x0 0x02400000>;
> + width = <1600>;
> + height = <2560>;
> + stride = <(1600 * 4)>;
> + format = "a8r8g8b8";
> + };
> + };
I still don't understand why efifb doesn't work for you.
Could you share your .config file?
Konrad
Messing up, reply again to fix thread.
On Sat, Dec 21, 2024 at 5:14 AM Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> wrote:
> On 20.12.2024 5:05 PM, Pengyu Luo wrote:
>
[...]
> > + chosen {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + framebuffer0: framebuffer@c6200000 {
> > + compatible = "simple-framebuffer";
> > + reg = <0x0 0xc6200000 0x0 0x02400000>;
> > + width = <1600>;
> > + height = <2560>;
> > + stride = <(1600 * 4)>;
> > + format = "a8r8g8b8";
> > + };
> > + };
>
> I still don't understand why efifb doesn't work for you.
>
In v1, you asked me
> Very very weird. Are you booting with clk_ignore_unused pd_ignore_unused
> in kernel cmdline?
I said yes, as Johan suggested in here (see [1]). I am adding Johan.
> Could you share your .config file?
Here please, https://pastebin.com/UKew61ZC
>
> Konrad
>
Best wishes,
Pengyu
[1] https://github.com/jhovold/linux/wiki/X13s#kernel-command-line
On 21.12.2024 8:57 AM, Pengyu Luo wrote:
> Messing up, reply again to fix thread.
>
> On Sat, Dec 21, 2024 at 5:14 AM Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> wrote:
>> On 20.12.2024 5:05 PM, Pengyu Luo wrote:
>>
>
> [...]
>
>>> + chosen {
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges;
>>> +
>>> + framebuffer0: framebuffer@c6200000 {
>>> + compatible = "simple-framebuffer";
>>> + reg = <0x0 0xc6200000 0x0 0x02400000>;
>>> + width = <1600>;
>>> + height = <2560>;
>>> + stride = <(1600 * 4)>;
>>> + format = "a8r8g8b8";
>>> + };
>>> + };
>>
>> I still don't understand why efifb doesn't work for you.
>>
>
> In v1, you asked me
Ahh sorry, I churn through a lot of emails and sometimes forget things.
>
>> Very very weird. Are you booting with clk_ignore_unused pd_ignore_unused
>> in kernel cmdline?
>
> I said yes, as Johan suggested in here (see [1]). I am adding Johan.
>
>> Could you share your .config file?
>
> Here please, https://pastebin.com/UKew61ZC
All the things one would expect for efifb to show up seem to be there.
Maybe try earlycon=efifb video=efifb?
Konrad
On Mon, Dec 23, 2024 at 8:25 PM Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> wrote:
> On 21.12.2024 8:57 AM, Pengyu Luo wrote:
> > Messing up, reply again to fix thread.
> >
> > On Sat, Dec 21, 2024 at 5:14 AM Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> wrote:
> >> On 20.12.2024 5:05 PM, Pengyu Luo wrote:
> >>
> >
> > [...]
> >
> >>> + chosen {
> >>> + #address-cells = <2>;
> >>> + #size-cells = <2>;
> >>> + ranges;
> >>> +
> >>> + framebuffer0: framebuffer@c6200000 {
> >>> + compatible = "simple-framebuffer";
> >>> + reg = <0x0 0xc6200000 0x0 0x02400000>;
> >>> + width = <1600>;
> >>> + height = <2560>;
> >>> + stride = <(1600 * 4)>;
> >>> + format = "a8r8g8b8";
> >>> + };
> >>> + };
> >>
> >> I still don't understand why efifb doesn't work for you.
> >>
> >
> > In v1, you asked me
>
> Ahh sorry, I churn through a lot of emails and sometimes forget things.
>
> >
> >> Very very weird. Are you booting with clk_ignore_unused pd_ignore_unused
> >> in kernel cmdline?
> >
> > I said yes, as Johan suggested in here (see [1]). I am adding Johan.
> >
> >> Could you share your .config file?
> >
> > Here please, https://pastebin.com/UKew61ZC
>
> All the things one would expect for efifb to show up seem to be there.
>
> Maybe try earlycon=efifb video=efifb?
Not work, whether or not adding clk_ignore_unused pd_ignore_unused.
>
> Konrad
Best wishes,
Pengyu
On 23.12.2024 2:07 PM, Pengyu Luo wrote:
> On Mon, Dec 23, 2024 at 8:25 PM Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> wrote:
>> On 21.12.2024 8:57 AM, Pengyu Luo wrote:
>>> Messing up, reply again to fix thread.
>>>
>>> On Sat, Dec 21, 2024 at 5:14 AM Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> wrote:
>>>> On 20.12.2024 5:05 PM, Pengyu Luo wrote:
>>>>
>>>
>>> [...]
>>>
>>>>> + chosen {
>>>>> + #address-cells = <2>;
>>>>> + #size-cells = <2>;
>>>>> + ranges;
>>>>> +
>>>>> + framebuffer0: framebuffer@c6200000 {
>>>>> + compatible = "simple-framebuffer";
>>>>> + reg = <0x0 0xc6200000 0x0 0x02400000>;
>>>>> + width = <1600>;
>>>>> + height = <2560>;
>>>>> + stride = <(1600 * 4)>;
>>>>> + format = "a8r8g8b8";
>>>>> + };
>>>>> + };
>>>>
>>>> I still don't understand why efifb doesn't work for you.
>>>>
>>>
>>> In v1, you asked me
>>
>> Ahh sorry, I churn through a lot of emails and sometimes forget things.
>>
>>>
>>>> Very very weird. Are you booting with clk_ignore_unused pd_ignore_unused
>>>> in kernel cmdline?
>>>
>>> I said yes, as Johan suggested in here (see [1]). I am adding Johan.
>>>
>>>> Could you share your .config file?
>>>
>>> Here please, https://pastebin.com/UKew61ZC
>>
>> All the things one would expect for efifb to show up seem to be there.
>>
>> Maybe try earlycon=efifb video=efifb?
>
> Not work, whether or not adding clk_ignore_unused pd_ignore_unused.
I am utterly confused then, maybe it's one of those devices where calling
exit boot services kills the display.
Either way, let's not worry about it anymore
Konrad
On Mon, Dec 30, 2024 at 10:53 PM Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> wrote:
> On 27.12.2024 6:13 PM, Pengyu Luo wrote:
> > The Embedded Controller in the Huawei Matebook E Go (s8280xp)
> > is accessible on &i2c15 and provides battery and adapter status,
> > port orientation status, as well as HPD event notifications for
> > two USB Type-C port, etc.
> >
> > Add the EC to the device tree and describe the relationship among
> > the type-c ports, orientation switches and the QMP combo PHY.
> >
> > Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
> > ---
> > .../boot/dts/qcom/sc8280xp-huawei-gaokun3.dts | 139 ++++++++++++++++++
> > 1 file changed, 139 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
> > index 09b95f89e..09ca9a560 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
> > @@ -28,6 +28,7 @@ / {
> >
> > aliases {
> > i2c4 = &i2c4;
> > + i2c15 = &i2c15;
> > serial1 = &uart2;
> > };
> >
> > @@ -216,6 +217,40 @@ map1 {
> > };
> > };
> >
> > + usb0-sbu-mux {
> > + compatible = "pericom,pi3usb102", "gpio-sbu-mux";
> > +
> > + select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
> > +
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&usb0_sbu_default>;
>
> Please preserve this order:
>
> property-n
> property-names
>
> > +
> > + orientation-switch;
>
> This
>
> > +
> > + port {
> > + usb0_sbu_mux: endpoint {
> > + remote-endpoint = <&ucsi0_sbu>;
>
> And this section have incorrect whitespacing (one tab too many, make
> sure you set your tab width to 8 spaces)
>
> Same for usb1-sbu-mux
>
> [...]
>
> > + i2c15_default: i2c15-default-state {
> > + pins = "gpio36", "gpio37";
> > + function = "qup15";
> > + drive-strength = <2>;
> > + bias-pull-up;
> > + };
> > +
> > mode_pin_active: mode-pin-state {
> > pins = "gpio26";
> > function = "gpio";
> > @@ -1301,6 +1426,20 @@ tx-pins {
> > };
> > };
> >
> > + usb0_sbu_default: usb0-sbu-state {
> > + pins = "gpio164";
> > + function = "gpio";
> > + bias-disable;
> > + drive-strength = <16>;
> > + };
> > +
> > + usb1_sbu_default: usb1-sbu-state {
> > + pins = "gpio47";
> > + function = "gpio";
> > + bias-disable;
> > + drive-strength = <16>;
> > + };
>
> Similarly, please keep drive-strength above bias for consistency
>
> lgtm otherwise
>
Totaly agree, I was in a hurry, I will fix it in v2.
Best wishes,
Pengyu
© 2016 - 2025 Red Hat, Inc.