In preparation to add tracepoint support, move protocol error UUID
definition to a common location, Also, make struct CXL RAS capability,
cxl_cper_sec_prot_err and CPER validation flags global for use across
different modules.

Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
---
 drivers/firmware/efi/cper.c     |  1 +
 drivers/firmware/efi/cper_cxl.c | 35 +--------------
 drivers/firmware/efi/cper_cxl.h | 51 ---------------------
 include/cxl/event.h             | 80 +++++++++++++++++++++++++++++++++
 include/linux/cper.h            |  4 ++
 5 files changed, 86 insertions(+), 85 deletions(-)

diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index 8e5762f7ef2e..ae1953e2b214 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -24,6 +24,7 @@
 #include <linux/bcd.h>
 #include <acpi/ghes.h>
 #include <ras/ras_event.h>
+#include <cxl/event.h>
 #include "cper_cxl.h"
 
 /*
diff --git a/drivers/firmware/efi/cper_cxl.c b/drivers/firmware/efi/cper_cxl.c
index cbaabcb7382d..64c0dd27be6e 100644
--- a/drivers/firmware/efi/cper_cxl.c
+++ b/drivers/firmware/efi/cper_cxl.c
@@ -8,27 +8,9 @@
  */
 
 #include <linux/cper.h>
+#include <cxl/event.h>
 #include "cper_cxl.h"
 
-#define PROT_ERR_VALID_AGENT_TYPE		BIT_ULL(0)
-#define PROT_ERR_VALID_AGENT_ADDRESS		BIT_ULL(1)
-#define PROT_ERR_VALID_DEVICE_ID		BIT_ULL(2)
-#define PROT_ERR_VALID_SERIAL_NUMBER		BIT_ULL(3)
-#define PROT_ERR_VALID_CAPABILITY		BIT_ULL(4)
-#define PROT_ERR_VALID_DVSEC			BIT_ULL(5)
-#define PROT_ERR_VALID_ERROR_LOG		BIT_ULL(6)
-
-/* CXL RAS Capability Structure, CXL v3.0 sec 8.2.4.16 */
-struct cxl_ras_capability_regs {
-	u32 uncor_status;
-	u32 uncor_mask;
-	u32 uncor_severity;
-	u32 cor_status;
-	u32 cor_mask;
-	u32 cap_control;
-	u32 header_log[16];
-};
-
 static const char * const prot_err_agent_type_strs[] = {
 	"Restricted CXL Device",
 	"Restricted CXL Host Downstream Port",
@@ -40,21 +22,6 @@ static const char * const prot_err_agent_type_strs[] = {
 	"CXL Upstream Switch Port",
 };
 
-/*
- * The layout of the enumeration and the values matches CXL Agent Type
- * field in the UEFI 2.10 Section N.2.13,
- */
-enum {
-	RCD,	/* Restricted CXL Device */
-	RCH_DP,	/* Restricted CXL Host Downstream Port */
-	DEVICE,	/* CXL Device */
-	LD,	/* CXL Logical Device */
-	FMLD,	/* CXL Fabric Manager managed Logical Device */
-	RP,	/* CXL Root Port */
-	DSP,	/* CXL Downstream Switch Port */
-	USP,	/* CXL Upstream Switch Port */
-};
-
 void cxl_cper_print_prot_err(const char *pfx,
 			     const struct cxl_cper_sec_prot_err *prot_err)
 {
diff --git a/drivers/firmware/efi/cper_cxl.h b/drivers/firmware/efi/cper_cxl.h
index 0e3ab0ba17c3..5ce1401ee17a 100644
--- a/drivers/firmware/efi/cper_cxl.h
+++ b/drivers/firmware/efi/cper_cxl.h
@@ -10,57 +10,6 @@
 #ifndef LINUX_CPER_CXL_H
 #define LINUX_CPER_CXL_H
 
-/* CXL Protocol Error Section */
-#define CPER_SEC_CXL_PROT_ERR						\
-	GUID_INIT(0x80B9EFB4, 0x52B5, 0x4DE3, 0xA7, 0x77, 0x68, 0x78,	\
-		  0x4B, 0x77, 0x10, 0x48)
-
-#pragma pack(1)
-
-/* Compute Express Link Protocol Error Section, UEFI v2.10 sec N.2.13 */
-struct cxl_cper_sec_prot_err {
-	u64 valid_bits;
-	u8 agent_type;
-	u8 reserved[7];
-
-	/*
-	 * Except for RCH Downstream Port, all the remaining CXL Agent
-	 * types are uniquely identified by the PCIe compatible SBDF number.
-	 */
-	union {
-		u64 rcrb_base_addr;
-		struct {
-			u8 function;
-			u8 device;
-			u8 bus;
-			u16 segment;
-			u8 reserved_1[3];
-		};
-	} agent_addr;
-
-	struct {
-		u16 vendor_id;
-		u16 device_id;
-		u16 subsystem_vendor_id;
-		u16 subsystem_id;
-		u8 class_code[2];
-		u16 slot;
-		u8 reserved_1[4];
-	} device_id;
-
-	struct {
-		u32 lower_dw;
-		u32 upper_dw;
-	} dev_serial_num;
-
-	u8 capability[60];
-	u16 dvsec_len;
-	u16 err_len;
-	u8 reserved_2[4];
-};
-
-#pragma pack()
-
 void cxl_cper_print_prot_err(const char *pfx,
 			     const struct cxl_cper_sec_prot_err *prot_err);
 
diff --git a/include/cxl/event.h b/include/cxl/event.h
index 0bea1afbd747..66d85fc87701 100644
--- a/include/cxl/event.h
+++ b/include/cxl/event.h
@@ -152,6 +152,86 @@ struct cxl_cper_work_data {
 	struct cxl_cper_event_rec rec;
 };
 
+#define PROT_ERR_VALID_AGENT_TYPE		BIT_ULL(0)
+#define PROT_ERR_VALID_AGENT_ADDRESS		BIT_ULL(1)
+#define PROT_ERR_VALID_DEVICE_ID		BIT_ULL(2)
+#define PROT_ERR_VALID_SERIAL_NUMBER		BIT_ULL(3)
+#define PROT_ERR_VALID_CAPABILITY		BIT_ULL(4)
+#define PROT_ERR_VALID_DVSEC			BIT_ULL(5)
+#define PROT_ERR_VALID_ERROR_LOG		BIT_ULL(6)
+
+/*
+ * The layout of the enumeration and the values matches CXL Agent Type
+ * field in the UEFI 2.10 Section N.2.13,
+ */
+enum {
+	RCD,	/* Restricted CXL Device */
+	RCH_DP,	/* Restricted CXL Host Downstream Port */
+	DEVICE,	/* CXL Device */
+	LD,	/* CXL Logical Device */
+	FMLD,	/* CXL Fabric Manager managed Logical Device */
+	RP,	/* CXL Root Port */
+	DSP,	/* CXL Downstream Switch Port */
+	USP,	/* CXL Upstream Switch Port */
+};
+
+#pragma pack(1)
+
+/* Compute Express Link Protocol Error Section, UEFI v2.10 sec N.2.13 */
+struct cxl_cper_sec_prot_err {
+	u64 valid_bits;
+	u8 agent_type;
+	u8 reserved[7];
+
+	/*
+	 * Except for RCH Downstream Port, all the remaining CXL Agent
+	 * types are uniquely identified by the PCIe compatible SBDF number.
+	 */
+	union {
+		u64 rcrb_base_addr;
+		struct {
+			u8 function;
+			u8 device;
+			u8 bus;
+			u16 segment;
+			u8 reserved_1[3];
+		};
+	} agent_addr;
+
+	struct {
+		u16 vendor_id;
+		u16 device_id;
+		u16 subsystem_vendor_id;
+		u16 subsystem_id;
+		u8 class_code[2];
+		u16 slot;
+		u8 reserved_1[4];
+	} device_id;
+
+	struct {
+		u32 lower_dw;
+		u32 upper_dw;
+	} dev_serial_num;
+
+	u8 capability[60];
+	u16 dvsec_len;
+	u16 err_len;
+	u8 reserved_2[4];
+};
+
+#pragma pack()
+
+/* CXL RAS Capability Structure, CXL v3.0 sec 8.2.4.16 */
+struct cxl_ras_capability_regs {
+	u32 uncor_status;
+	u32 uncor_mask;
+	u32 uncor_severity;
+	u32 cor_status;
+	u32 cor_mask;
+	u32 cap_control;
+	u32 header_log[16];
+};
+
 #ifdef CONFIG_ACPI_APEI_GHES
 int cxl_cper_register_work(struct work_struct *work);
 int cxl_cper_unregister_work(struct work_struct *work);
diff --git a/include/linux/cper.h b/include/linux/cper.h
index 265b0f8fc0b3..5c6d4d5b9975 100644
--- a/include/linux/cper.h
+++ b/include/linux/cper.h
@@ -89,6 +89,10 @@ enum {
 #define CPER_NOTIFY_DMAR						\
 	GUID_INIT(0x667DD791, 0xC6B3, 0x4c27, 0x8A, 0x6B, 0x0F, 0x8E,	\
 		  0x72, 0x2D, 0xEB, 0x41)
+/* CXL Protocol Error Section */
+#define CPER_SEC_CXL_PROT_ERR						\
+	GUID_INIT(0x80B9EFB4, 0x52B5, 0x4DE3, 0xA7, 0x77, 0x68, 0x78,	\
+		  0x4B, 0x77, 0x10, 0x48)
 
 /* CXL Event record UUIDs are formatted as GUIDs and reported in section type */
 /*
-- 
2.17.1

On 12/16/24 7:20 PM, Smita Koralahalli wrote:
> In preparation to add tracepoint support, move protocol error UUID
> definition to a common location, Also, make struct CXL RAS capability,
> cxl_cper_sec_prot_err and CPER validation flags global for use across
> different modules.
> 
> Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Reviewed-by: Ira Weiny <ira.weiny@intel.com>

Reviewed-by: Dave Jiang <dave.jiang@intel.com>

> ---
>  drivers/firmware/efi/cper.c     |  1 +
>  drivers/firmware/efi/cper_cxl.c | 35 +--------------
>  drivers/firmware/efi/cper_cxl.h | 51 ---------------------
>  include/cxl/event.h             | 80 +++++++++++++++++++++++++++++++++
>  include/linux/cper.h            |  4 ++
>  5 files changed, 86 insertions(+), 85 deletions(-)
> 
> diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
> index 8e5762f7ef2e..ae1953e2b214 100644
> --- a/drivers/firmware/efi/cper.c
> +++ b/drivers/firmware/efi/cper.c
> @@ -24,6 +24,7 @@
>  #include <linux/bcd.h>
>  #include <acpi/ghes.h>
>  #include <ras/ras_event.h>
> +#include <cxl/event.h>
>  #include "cper_cxl.h"
>  
>  /*
> diff --git a/drivers/firmware/efi/cper_cxl.c b/drivers/firmware/efi/cper_cxl.c
> index cbaabcb7382d..64c0dd27be6e 100644
> --- a/drivers/firmware/efi/cper_cxl.c
> +++ b/drivers/firmware/efi/cper_cxl.c
> @@ -8,27 +8,9 @@
>   */
>  
>  #include <linux/cper.h>
> +#include <cxl/event.h>
>  #include "cper_cxl.h"
>  
> -#define PROT_ERR_VALID_AGENT_TYPE		BIT_ULL(0)
> -#define PROT_ERR_VALID_AGENT_ADDRESS		BIT_ULL(1)
> -#define PROT_ERR_VALID_DEVICE_ID		BIT_ULL(2)
> -#define PROT_ERR_VALID_SERIAL_NUMBER		BIT_ULL(3)
> -#define PROT_ERR_VALID_CAPABILITY		BIT_ULL(4)
> -#define PROT_ERR_VALID_DVSEC			BIT_ULL(5)
> -#define PROT_ERR_VALID_ERROR_LOG		BIT_ULL(6)
> -
> -/* CXL RAS Capability Structure, CXL v3.0 sec 8.2.4.16 */
> -struct cxl_ras_capability_regs {
> -	u32 uncor_status;
> -	u32 uncor_mask;
> -	u32 uncor_severity;
> -	u32 cor_status;
> -	u32 cor_mask;
> -	u32 cap_control;
> -	u32 header_log[16];
> -};
> -
>  static const char * const prot_err_agent_type_strs[] = {
>  	"Restricted CXL Device",
>  	"Restricted CXL Host Downstream Port",
> @@ -40,21 +22,6 @@ static const char * const prot_err_agent_type_strs[] = {
>  	"CXL Upstream Switch Port",
>  };
>  
> -/*
> - * The layout of the enumeration and the values matches CXL Agent Type
> - * field in the UEFI 2.10 Section N.2.13,
> - */
> -enum {
> -	RCD,	/* Restricted CXL Device */
> -	RCH_DP,	/* Restricted CXL Host Downstream Port */
> -	DEVICE,	/* CXL Device */
> -	LD,	/* CXL Logical Device */
> -	FMLD,	/* CXL Fabric Manager managed Logical Device */
> -	RP,	/* CXL Root Port */
> -	DSP,	/* CXL Downstream Switch Port */
> -	USP,	/* CXL Upstream Switch Port */
> -};
> -
>  void cxl_cper_print_prot_err(const char *pfx,
>  			     const struct cxl_cper_sec_prot_err *prot_err)
>  {
> diff --git a/drivers/firmware/efi/cper_cxl.h b/drivers/firmware/efi/cper_cxl.h
> index 0e3ab0ba17c3..5ce1401ee17a 100644
> --- a/drivers/firmware/efi/cper_cxl.h
> +++ b/drivers/firmware/efi/cper_cxl.h
> @@ -10,57 +10,6 @@
>  #ifndef LINUX_CPER_CXL_H
>  #define LINUX_CPER_CXL_H
>  
> -/* CXL Protocol Error Section */
> -#define CPER_SEC_CXL_PROT_ERR						\
> -	GUID_INIT(0x80B9EFB4, 0x52B5, 0x4DE3, 0xA7, 0x77, 0x68, 0x78,	\
> -		  0x4B, 0x77, 0x10, 0x48)
> -
> -#pragma pack(1)
> -
> -/* Compute Express Link Protocol Error Section, UEFI v2.10 sec N.2.13 */
> -struct cxl_cper_sec_prot_err {
> -	u64 valid_bits;
> -	u8 agent_type;
> -	u8 reserved[7];
> -
> -	/*
> -	 * Except for RCH Downstream Port, all the remaining CXL Agent
> -	 * types are uniquely identified by the PCIe compatible SBDF number.
> -	 */
> -	union {
> -		u64 rcrb_base_addr;
> -		struct {
> -			u8 function;
> -			u8 device;
> -			u8 bus;
> -			u16 segment;
> -			u8 reserved_1[3];
> -		};
> -	} agent_addr;
> -
> -	struct {
> -		u16 vendor_id;
> -		u16 device_id;
> -		u16 subsystem_vendor_id;
> -		u16 subsystem_id;
> -		u8 class_code[2];
> -		u16 slot;
> -		u8 reserved_1[4];
> -	} device_id;
> -
> -	struct {
> -		u32 lower_dw;
> -		u32 upper_dw;
> -	} dev_serial_num;
> -
> -	u8 capability[60];
> -	u16 dvsec_len;
> -	u16 err_len;
> -	u8 reserved_2[4];
> -};
> -
> -#pragma pack()
> -
>  void cxl_cper_print_prot_err(const char *pfx,
>  			     const struct cxl_cper_sec_prot_err *prot_err);
>  
> diff --git a/include/cxl/event.h b/include/cxl/event.h
> index 0bea1afbd747..66d85fc87701 100644
> --- a/include/cxl/event.h
> +++ b/include/cxl/event.h
> @@ -152,6 +152,86 @@ struct cxl_cper_work_data {
>  	struct cxl_cper_event_rec rec;
>  };
>  
> +#define PROT_ERR_VALID_AGENT_TYPE		BIT_ULL(0)
> +#define PROT_ERR_VALID_AGENT_ADDRESS		BIT_ULL(1)
> +#define PROT_ERR_VALID_DEVICE_ID		BIT_ULL(2)
> +#define PROT_ERR_VALID_SERIAL_NUMBER		BIT_ULL(3)
> +#define PROT_ERR_VALID_CAPABILITY		BIT_ULL(4)
> +#define PROT_ERR_VALID_DVSEC			BIT_ULL(5)
> +#define PROT_ERR_VALID_ERROR_LOG		BIT_ULL(6)
> +
> +/*
> + * The layout of the enumeration and the values matches CXL Agent Type
> + * field in the UEFI 2.10 Section N.2.13,
> + */
> +enum {
> +	RCD,	/* Restricted CXL Device */
> +	RCH_DP,	/* Restricted CXL Host Downstream Port */
> +	DEVICE,	/* CXL Device */
> +	LD,	/* CXL Logical Device */
> +	FMLD,	/* CXL Fabric Manager managed Logical Device */
> +	RP,	/* CXL Root Port */
> +	DSP,	/* CXL Downstream Switch Port */
> +	USP,	/* CXL Upstream Switch Port */
> +};
> +
> +#pragma pack(1)
> +
> +/* Compute Express Link Protocol Error Section, UEFI v2.10 sec N.2.13 */
> +struct cxl_cper_sec_prot_err {
> +	u64 valid_bits;
> +	u8 agent_type;
> +	u8 reserved[7];
> +
> +	/*
> +	 * Except for RCH Downstream Port, all the remaining CXL Agent
> +	 * types are uniquely identified by the PCIe compatible SBDF number.
> +	 */
> +	union {
> +		u64 rcrb_base_addr;
> +		struct {
> +			u8 function;
> +			u8 device;
> +			u8 bus;
> +			u16 segment;
> +			u8 reserved_1[3];
> +		};
> +	} agent_addr;
> +
> +	struct {
> +		u16 vendor_id;
> +		u16 device_id;
> +		u16 subsystem_vendor_id;
> +		u16 subsystem_id;
> +		u8 class_code[2];
> +		u16 slot;
> +		u8 reserved_1[4];
> +	} device_id;
> +
> +	struct {
> +		u32 lower_dw;
> +		u32 upper_dw;
> +	} dev_serial_num;
> +
> +	u8 capability[60];
> +	u16 dvsec_len;
> +	u16 err_len;
> +	u8 reserved_2[4];
> +};
> +
> +#pragma pack()
> +
> +/* CXL RAS Capability Structure, CXL v3.0 sec 8.2.4.16 */
> +struct cxl_ras_capability_regs {
> +	u32 uncor_status;
> +	u32 uncor_mask;
> +	u32 uncor_severity;
> +	u32 cor_status;
> +	u32 cor_mask;
> +	u32 cap_control;
> +	u32 header_log[16];
> +};
> +
>  #ifdef CONFIG_ACPI_APEI_GHES
>  int cxl_cper_register_work(struct work_struct *work);
>  int cxl_cper_unregister_work(struct work_struct *work);
> diff --git a/include/linux/cper.h b/include/linux/cper.h
> index 265b0f8fc0b3..5c6d4d5b9975 100644
> --- a/include/linux/cper.h
> +++ b/include/linux/cper.h
> @@ -89,6 +89,10 @@ enum {
>  #define CPER_NOTIFY_DMAR						\
>  	GUID_INIT(0x667DD791, 0xC6B3, 0x4c27, 0x8A, 0x6B, 0x0F, 0x8E,	\
>  		  0x72, 0x2D, 0xEB, 0x41)
> +/* CXL Protocol Error Section */
> +#define CPER_SEC_CXL_PROT_ERR						\
> +	GUID_INIT(0x80B9EFB4, 0x52B5, 0x4DE3, 0xA7, 0x77, 0x68, 0x78,	\
> +		  0x4B, 0x77, 0x10, 0x48)
>  
>  /* CXL Event record UUIDs are formatted as GUIDs and reported in section type */
>  /*