On Tue, 10 Dec 2024 at 10:07, Stephan Gerhold
<stephan.gerhold@linaro.org> wrote:
>
> On the X1E80100 CRD, &vreg_l3e_1p2 only powers &usb_mp_qmpphy0/1
> (i.e. USBSS_3 and USBSS_4). The QMP PHYs for USB_0, USB_1 and USB_2
> are actually powered by &vreg_l2j_1p2.
>
> Since x1e80100-dell-xps13-9345 mostly just mirrors the power supplies from
> the x1e80100-crd device tree, assume that the fix also applies here.
Though I can't verify schematics (perhaps Laurentiu can?), can confirm
USBs still work as expected with this change.
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
>
> Cc: stable@vger.kernel.org
> Fixes: f5b788d0e8cd ("arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345")
> Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
> index b112092fbb9fd955adca1ae8a76294c776fa2d1e..1aec536218bc2c9197410a43adec291a31f9beed 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
> @@ -1093,7 +1093,7 @@ &usb_1_ss0_hsphy {
> };
>
> &usb_1_ss0_qmpphy {
> - vdda-phy-supply = <&vreg_l3e_1p2>;
> + vdda-phy-supply = <&vreg_l2j_1p2>;
> vdda-pll-supply = <&vreg_l1j_0p9>;
>
> status = "okay";
> @@ -1125,7 +1125,7 @@ &usb_1_ss1_hsphy {
> };
>
> &usb_1_ss1_qmpphy {
> - vdda-phy-supply = <&vreg_l3e_1p2>;
> + vdda-phy-supply = <&vreg_l2j_1p2>;
> vdda-pll-supply = <&vreg_l2d_0p9>;
>
> status = "okay";
>
> --
> 2.47.0
>