On Tue, Dec 10, 2024 at 05:11:04PM +0800, Xiangxu Yin wrote:
> The patches include:
> 1.ADD DisplayPort controller and phy nodes to Qualcomm QCS615 dtsi file.
> 2.Add dp-connector, config hpd-gpios which used for Displayport hotplug detect.
> 3.Config lane mapping through data-lanes prop.
>
> This patch series depends on below patch series:
> - dispcc
> https://lore.kernel.org/all/20241108-qcs615-mm-clockcontroller-v3-0-7d3b2d235fdf@quicinc.com/
> - dispcc dts
> https://lore.kernel.org/lkml/20241108-qcs615-mm-dt-nodes-v1-0-b2669cac0624@quicinc.com/
> - display
> https://lore.kernel.org/all/20241122-add-display-support-for-qcs615-platform-v3-0-35252e3a51fe@quicinc.com/
> - displayport driver
> https://lore.kernel.org/all/20241129-add-displayport-support-for-qcs615-platform-v1-0-09a4338d93ef@quicinc.com/
No, it doesn't. The DT and the driver can come up separately.
>
> Signed-off-by: Xiangxu Yin <quic_xiangxuy@quicinc.com>
>
> ---
> Xiangxu Yin (2):
> arm64: dts: qcom: Add DisplayPort support for QCS615
> arm64: dts: qcom: Enable DisplayPort on QCS615 RIDE platform
>
> arch/arm64/boot/dts/qcom/qcs615-ride.dts | 30 +++++++++
> arch/arm64/boot/dts/qcom/qcs615.dtsi | 107 ++++++++++++++++++++++++++++++-
> 2 files changed, 135 insertions(+), 2 deletions(-)
> ---
> base-commit: 68586ffc0ad47448d0c00a72ba61db66b127c23a
> change-id: 20241210-add-displayport-support-to-qcs615-devicetree-1575aa4e299d
>
> Best regards,
> --
> xiangxuy <quic_xiangxuy@quicinc.com>
>
--
With best wishes
Dmitry