UB9702 does not have SP and EQ registers, but the driver uses them in
log_status(). Fix this by separating the SP and EQ related log_status()
work into a separate function (for clarity) and calling that function
only for UB960.

Cc: stable@vger.kernel.org
Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
 drivers/media/i2c/ds90ub960.c | 90 ++++++++++++++++++++++++-------------------
 1 file changed, 50 insertions(+), 40 deletions(-)

diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index 24198b803eff..94c8acf171b4 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -2950,6 +2950,54 @@ static const struct v4l2_subdev_pad_ops ub960_pad_ops = {
 	.set_fmt = ub960_set_fmt,
 };
 
+static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv,
+					 unsigned int nport)
+{
+	struct device *dev = &priv->client->dev;
+	u8 eq_level;
+	s8 strobe_pos;
+	u8 v = 0;
+
+	/* Strobe */
+
+	ub960_read(priv, UB960_XR_AEQ_CTL1, &v);
+
+	dev_info(dev, "\t%s strobe\n",
+		 (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) ? "Adaptive" :
+							  "Manual");
+
+	if (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) {
+		ub960_read(priv, UB960_XR_SFILTER_CFG, &v);
+
+		dev_info(dev, "\tStrobe range [%d, %d]\n",
+			 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) & 0xf) - 7,
+			 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT) & 0xf) - 7);
+	}
+
+	ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
+
+	dev_info(dev, "\tStrobe pos %d\n", strobe_pos);
+
+	/* EQ */
+
+	ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v);
+
+	dev_info(dev, "\t%s EQ\n",
+		 (v & UB960_RR_AEQ_BYPASS_ENABLE) ? "Manual" :
+						    "Adaptive");
+
+	if (!(v & UB960_RR_AEQ_BYPASS_ENABLE)) {
+		ub960_rxport_read(priv, nport, UB960_RR_AEQ_MIN_MAX, &v);
+
+		dev_info(dev, "\tEQ range [%u, %u]\n",
+			 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) & 0xf,
+			 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT) & 0xf);
+	}
+
+	if (ub960_rxport_get_eq_level(priv, nport, &eq_level) == 0)
+		dev_info(dev, "\tEQ level %u\n", eq_level);
+}
+
 static int ub960_log_status(struct v4l2_subdev *sd)
 {
 	struct ub960_data *priv = sd_to_ub960(sd);
@@ -2997,8 +3045,6 @@ static int ub960_log_status(struct v4l2_subdev *sd)
 
 	for (nport = 0; nport < priv->hw_data->num_rxports; nport++) {
 		struct ub960_rxport *rxport = priv->rxports[nport];
-		u8 eq_level;
-		s8 strobe_pos;
 		unsigned int i;
 
 		dev_info(dev, "RX %u\n", nport);
@@ -3034,44 +3080,8 @@ static int ub960_log_status(struct v4l2_subdev *sd)
 		ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v);
 		dev_info(dev, "\tcsi_err_counter %u\n", v);
 
-		/* Strobe */
-
-		ub960_read(priv, UB960_XR_AEQ_CTL1, &v);
-
-		dev_info(dev, "\t%s strobe\n",
-			 (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) ? "Adaptive" :
-								  "Manual");
-
-		if (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) {
-			ub960_read(priv, UB960_XR_SFILTER_CFG, &v);
-
-			dev_info(dev, "\tStrobe range [%d, %d]\n",
-				 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) & 0xf) - 7,
-				 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT) & 0xf) - 7);
-		}
-
-		ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
-
-		dev_info(dev, "\tStrobe pos %d\n", strobe_pos);
-
-		/* EQ */
-
-		ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v);
-
-		dev_info(dev, "\t%s EQ\n",
-			 (v & UB960_RR_AEQ_BYPASS_ENABLE) ? "Manual" :
-							    "Adaptive");
-
-		if (!(v & UB960_RR_AEQ_BYPASS_ENABLE)) {
-			ub960_rxport_read(priv, nport, UB960_RR_AEQ_MIN_MAX, &v);
-
-			dev_info(dev, "\tEQ range [%u, %u]\n",
-				 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) & 0xf,
-				 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT) & 0xf);
-		}
-
-		if (ub960_rxport_get_eq_level(priv, nport, &eq_level) == 0)
-			dev_info(dev, "\tEQ level %u\n", eq_level);
+		if (!priv->hw_data->is_ub9702)
+			ub960_log_status_ub960_sp_eq(priv, nport);
 
 		/* GPIOs */
 		for (i = 0; i < UB960_NUM_BC_GPIOS; i++) {

-- 
2.43.0

Huomenta,

On Fri, Dec 06, 2024 at 10:26:40AM +0200, Tomi Valkeinen wrote:
> UB9702 does not have SP and EQ registers, but the driver uses them in
> log_status(). Fix this by separating the SP and EQ related log_status()
> work into a separate function (for clarity) and calling that function
> only for UB960.
> 
> Cc: stable@vger.kernel.org
> Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
> Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> ---
>  drivers/media/i2c/ds90ub960.c | 90 ++++++++++++++++++++++++-------------------
>  1 file changed, 50 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
> index 24198b803eff..94c8acf171b4 100644
> --- a/drivers/media/i2c/ds90ub960.c
> +++ b/drivers/media/i2c/ds90ub960.c
> @@ -2950,6 +2950,54 @@ static const struct v4l2_subdev_pad_ops ub960_pad_ops = {
>  	.set_fmt = ub960_set_fmt,
>  };
>  
> +static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv,
> +					 unsigned int nport)
> +{
> +	struct device *dev = &priv->client->dev;
> +	u8 eq_level;
> +	s8 strobe_pos;
> +	u8 v = 0;
> +
> +	/* Strobe */
> +
> +	ub960_read(priv, UB960_XR_AEQ_CTL1, &v);

How about adding __must_check to the ub960_read()?

> +
> +	dev_info(dev, "\t%s strobe\n",
> +		 (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) ? "Adaptive" :
> +							  "Manual");
> +
> +	if (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) {
> +		ub960_read(priv, UB960_XR_SFILTER_CFG, &v);
> +
> +		dev_info(dev, "\tStrobe range [%d, %d]\n",
> +			 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) & 0xf) - 7,
> +			 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT) & 0xf) - 7);
> +	}
> +
> +	ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
> +
> +	dev_info(dev, "\tStrobe pos %d\n", strobe_pos);
> +
> +	/* EQ */
> +
> +	ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v);
> +
> +	dev_info(dev, "\t%s EQ\n",
> +		 (v & UB960_RR_AEQ_BYPASS_ENABLE) ? "Manual" :
> +						    "Adaptive");
> +
> +	if (!(v & UB960_RR_AEQ_BYPASS_ENABLE)) {
> +		ub960_rxport_read(priv, nport, UB960_RR_AEQ_MIN_MAX, &v);
> +
> +		dev_info(dev, "\tEQ range [%u, %u]\n",
> +			 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) & 0xf,
> +			 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT) & 0xf);
> +	}
> +
> +	if (ub960_rxport_get_eq_level(priv, nport, &eq_level) == 0)
> +		dev_info(dev, "\tEQ level %u\n", eq_level);
> +}
> +
>  static int ub960_log_status(struct v4l2_subdev *sd)
>  {
>  	struct ub960_data *priv = sd_to_ub960(sd);
> @@ -2997,8 +3045,6 @@ static int ub960_log_status(struct v4l2_subdev *sd)
>  
>  	for (nport = 0; nport < priv->hw_data->num_rxports; nport++) {
>  		struct ub960_rxport *rxport = priv->rxports[nport];
> -		u8 eq_level;
> -		s8 strobe_pos;
>  		unsigned int i;
>  
>  		dev_info(dev, "RX %u\n", nport);
> @@ -3034,44 +3080,8 @@ static int ub960_log_status(struct v4l2_subdev *sd)
>  		ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v);
>  		dev_info(dev, "\tcsi_err_counter %u\n", v);
>  
> -		/* Strobe */
> -
> -		ub960_read(priv, UB960_XR_AEQ_CTL1, &v);
> -
> -		dev_info(dev, "\t%s strobe\n",
> -			 (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) ? "Adaptive" :
> -								  "Manual");
> -
> -		if (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) {
> -			ub960_read(priv, UB960_XR_SFILTER_CFG, &v);
> -
> -			dev_info(dev, "\tStrobe range [%d, %d]\n",
> -				 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) & 0xf) - 7,
> -				 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT) & 0xf) - 7);
> -		}
> -
> -		ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
> -
> -		dev_info(dev, "\tStrobe pos %d\n", strobe_pos);
> -
> -		/* EQ */
> -
> -		ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v);
> -
> -		dev_info(dev, "\t%s EQ\n",
> -			 (v & UB960_RR_AEQ_BYPASS_ENABLE) ? "Manual" :
> -							    "Adaptive");
> -
> -		if (!(v & UB960_RR_AEQ_BYPASS_ENABLE)) {
> -			ub960_rxport_read(priv, nport, UB960_RR_AEQ_MIN_MAX, &v);
> -
> -			dev_info(dev, "\tEQ range [%u, %u]\n",
> -				 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) & 0xf,
> -				 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT) & 0xf);
> -		}
> -
> -		if (ub960_rxport_get_eq_level(priv, nport, &eq_level) == 0)
> -			dev_info(dev, "\tEQ level %u\n", eq_level);
> +		if (!priv->hw_data->is_ub9702)
> +			ub960_log_status_ub960_sp_eq(priv, nport);
>  
>  		/* GPIOs */
>  		for (i = 0; i < UB960_NUM_BC_GPIOS; i++) {
> 

-- 
Terveisin,

Sakari Ailus

Hi,

On 09/12/2024 11:11, Sakari Ailus wrote:
> Huomenta,
> 
> On Fri, Dec 06, 2024 at 10:26:40AM +0200, Tomi Valkeinen wrote:
>> UB9702 does not have SP and EQ registers, but the driver uses them in
>> log_status(). Fix this by separating the SP and EQ related log_status()
>> work into a separate function (for clarity) and calling that function
>> only for UB960.
>>
>> Cc: stable@vger.kernel.org
>> Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
>> Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
>> ---
>>   drivers/media/i2c/ds90ub960.c | 90 ++++++++++++++++++++++++-------------------
>>   1 file changed, 50 insertions(+), 40 deletions(-)
>>
>> diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
>> index 24198b803eff..94c8acf171b4 100644
>> --- a/drivers/media/i2c/ds90ub960.c
>> +++ b/drivers/media/i2c/ds90ub960.c
>> @@ -2950,6 +2950,54 @@ static const struct v4l2_subdev_pad_ops ub960_pad_ops = {
>>   	.set_fmt = ub960_set_fmt,
>>   };
>>   
>> +static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv,
>> +					 unsigned int nport)
>> +{
>> +	struct device *dev = &priv->client->dev;
>> +	u8 eq_level;
>> +	s8 strobe_pos;
>> +	u8 v = 0;
>> +
>> +	/* Strobe */
>> +
>> +	ub960_read(priv, UB960_XR_AEQ_CTL1, &v);
> 
> How about adding __must_check to the ub960_read()?

Actually, this is just moving code around (behind an if), so I'd rather 
not add more to this patch, especially as this is a fix.

We'll add the error handling separately on top.

  Tomi

> 
>> +
>> +	dev_info(dev, "\t%s strobe\n",
>> +		 (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) ? "Adaptive" :
>> +							  "Manual");
>> +
>> +	if (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) {
>> +		ub960_read(priv, UB960_XR_SFILTER_CFG, &v);
>> +
>> +		dev_info(dev, "\tStrobe range [%d, %d]\n",
>> +			 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) & 0xf) - 7,
>> +			 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT) & 0xf) - 7);
>> +	}
>> +
>> +	ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
>> +
>> +	dev_info(dev, "\tStrobe pos %d\n", strobe_pos);
>> +
>> +	/* EQ */
>> +
>> +	ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v);
>> +
>> +	dev_info(dev, "\t%s EQ\n",
>> +		 (v & UB960_RR_AEQ_BYPASS_ENABLE) ? "Manual" :
>> +						    "Adaptive");
>> +
>> +	if (!(v & UB960_RR_AEQ_BYPASS_ENABLE)) {
>> +		ub960_rxport_read(priv, nport, UB960_RR_AEQ_MIN_MAX, &v);
>> +
>> +		dev_info(dev, "\tEQ range [%u, %u]\n",
>> +			 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) & 0xf,
>> +			 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT) & 0xf);
>> +	}
>> +
>> +	if (ub960_rxport_get_eq_level(priv, nport, &eq_level) == 0)
>> +		dev_info(dev, "\tEQ level %u\n", eq_level);
>> +}
>> +
>>   static int ub960_log_status(struct v4l2_subdev *sd)
>>   {
>>   	struct ub960_data *priv = sd_to_ub960(sd);
>> @@ -2997,8 +3045,6 @@ static int ub960_log_status(struct v4l2_subdev *sd)
>>   
>>   	for (nport = 0; nport < priv->hw_data->num_rxports; nport++) {
>>   		struct ub960_rxport *rxport = priv->rxports[nport];
>> -		u8 eq_level;
>> -		s8 strobe_pos;
>>   		unsigned int i;
>>   
>>   		dev_info(dev, "RX %u\n", nport);
>> @@ -3034,44 +3080,8 @@ static int ub960_log_status(struct v4l2_subdev *sd)
>>   		ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v);
>>   		dev_info(dev, "\tcsi_err_counter %u\n", v);
>>   
>> -		/* Strobe */
>> -
>> -		ub960_read(priv, UB960_XR_AEQ_CTL1, &v);
>> -
>> -		dev_info(dev, "\t%s strobe\n",
>> -			 (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) ? "Adaptive" :
>> -								  "Manual");
>> -
>> -		if (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) {
>> -			ub960_read(priv, UB960_XR_SFILTER_CFG, &v);
>> -
>> -			dev_info(dev, "\tStrobe range [%d, %d]\n",
>> -				 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) & 0xf) - 7,
>> -				 ((v >> UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT) & 0xf) - 7);
>> -		}
>> -
>> -		ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos);
>> -
>> -		dev_info(dev, "\tStrobe pos %d\n", strobe_pos);
>> -
>> -		/* EQ */
>> -
>> -		ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v);
>> -
>> -		dev_info(dev, "\t%s EQ\n",
>> -			 (v & UB960_RR_AEQ_BYPASS_ENABLE) ? "Manual" :
>> -							    "Adaptive");
>> -
>> -		if (!(v & UB960_RR_AEQ_BYPASS_ENABLE)) {
>> -			ub960_rxport_read(priv, nport, UB960_RR_AEQ_MIN_MAX, &v);
>> -
>> -			dev_info(dev, "\tEQ range [%u, %u]\n",
>> -				 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) & 0xf,
>> -				 (v >> UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT) & 0xf);
>> -		}
>> -
>> -		if (ub960_rxport_get_eq_level(priv, nport, &eq_level) == 0)
>> -			dev_info(dev, "\tEQ level %u\n", eq_level);
>> +		if (!priv->hw_data->is_ub9702)
>> +			ub960_log_status_ub960_sp_eq(priv, nport);
>>   
>>   		/* GPIOs */
>>   		for (i = 0; i < UB960_NUM_BC_GPIOS; i++) {
>>
>

Huomenta,

On Tue, Dec 10, 2024 at 09:38:30AM +0200, Tomi Valkeinen wrote:
> Hi,
> 
> On 09/12/2024 11:11, Sakari Ailus wrote:
> > Huomenta,
> > 
> > On Fri, Dec 06, 2024 at 10:26:40AM +0200, Tomi Valkeinen wrote:
> > > UB9702 does not have SP and EQ registers, but the driver uses them in
> > > log_status(). Fix this by separating the SP and EQ related log_status()
> > > work into a separate function (for clarity) and calling that function
> > > only for UB960.
> > > 
> > > Cc: stable@vger.kernel.org
> > > Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
> > > Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
> > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> > > ---
> > >   drivers/media/i2c/ds90ub960.c | 90 ++++++++++++++++++++++++-------------------
> > >   1 file changed, 50 insertions(+), 40 deletions(-)
> > > 
> > > diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
> > > index 24198b803eff..94c8acf171b4 100644
> > > --- a/drivers/media/i2c/ds90ub960.c
> > > +++ b/drivers/media/i2c/ds90ub960.c
> > > @@ -2950,6 +2950,54 @@ static const struct v4l2_subdev_pad_ops ub960_pad_ops = {
> > >   	.set_fmt = ub960_set_fmt,
> > >   };
> > > +static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv,
> > > +					 unsigned int nport)
> > > +{
> > > +	struct device *dev = &priv->client->dev;
> > > +	u8 eq_level;
> > > +	s8 strobe_pos;
> > > +	u8 v = 0;
> > > +
> > > +	/* Strobe */
> > > +
> > > +	ub960_read(priv, UB960_XR_AEQ_CTL1, &v);
> > 
> > How about adding __must_check to the ub960_read()?
> 
> Actually, this is just moving code around (behind an if), so I'd rather not
> add more to this patch, especially as this is a fix.
> 
> We'll add the error handling separately on top.

Works for me.

-- 
Sakari Ailus

Hi,

On 09/12/2024 11:11, Sakari Ailus wrote:
> Huomenta,
> 
> On Fri, Dec 06, 2024 at 10:26:40AM +0200, Tomi Valkeinen wrote:
>> UB9702 does not have SP and EQ registers, but the driver uses them in
>> log_status(). Fix this by separating the SP and EQ related log_status()
>> work into a separate function (for clarity) and calling that function
>> only for UB960.
>>
>> Cc: stable@vger.kernel.org
>> Fixes: afe267f2d368 ("media: i2c: add DS90UB960 driver")
>> Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
>> ---
>>   drivers/media/i2c/ds90ub960.c | 90 ++++++++++++++++++++++++-------------------
>>   1 file changed, 50 insertions(+), 40 deletions(-)
>>
>> diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
>> index 24198b803eff..94c8acf171b4 100644
>> --- a/drivers/media/i2c/ds90ub960.c
>> +++ b/drivers/media/i2c/ds90ub960.c
>> @@ -2950,6 +2950,54 @@ static const struct v4l2_subdev_pad_ops ub960_pad_ops = {
>>   	.set_fmt = ub960_set_fmt,
>>   };
>>   
>> +static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv,
>> +					 unsigned int nport)
>> +{
>> +	struct device *dev = &priv->client->dev;
>> +	u8 eq_level;
>> +	s8 strobe_pos;
>> +	u8 v = 0;
>> +
>> +	/* Strobe */
>> +
>> +	ub960_read(priv, UB960_XR_AEQ_CTL1, &v);
> 
> How about adding __must_check to the ub960_read()?

Yes, that's a good idea.

We also have a patch in works that'll add error handling to all the i2c 
reads and writes (and some other ub960 improvements), on top of this series.

  Tomi