Add check for the return value of clk_enable() to catch the potential
error. Add a cleanup loop to disable clocks already enabled in case
of an error during clock enabling for subsequent banks.

Fixes: 05d8af449d93 ("pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested")
Signed-off-by: Mingwei Zheng <zmw12306@gmail.com>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index 5b7fa77c1184..eb7b2f864d88 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -1738,10 +1738,16 @@ int __maybe_unused stm32_pinctrl_resume(struct device *dev)
 {
 	struct stm32_pinctrl *pctl = dev_get_drvdata(dev);
 	struct stm32_pinctrl_group *g = pctl->groups;
-	int i;
+	int i, j, ret;
 
-	for (i = 0; i < pctl->nbanks; i++)
-		clk_enable(pctl->banks[i].clk);
+	for (i = 0; i < pctl->nbanks; i++) {
+		ret = clk_enable(pctl->banks[i].clk);
+		if (ret) {
+			for (j = 0; j < i; j++)
+				clk_disable(pctl->banks[j].clk);
+			return ret;
+		}
+	}
 
 	for (i = 0; i < pctl->ngroups; i++, g++)
 		stm32_pinctrl_restore_gpio_regs(pctl, g->pin);
-- 
2.34.1

On 12/5/24 5:59 AM, Mingwei Zheng wrote:
> Add check for the return value of clk_enable() to catch the potential
> error. Add a cleanup loop to disable clocks already enabled in case
> of an error during clock enabling for subsequent banks.
> 
> Fixes: 05d8af449d93 ("pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested")
> Signed-off-by: Mingwei Zheng <zmw12306@gmail.com>
> Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
> ---
>   drivers/pinctrl/stm32/pinctrl-stm32.c | 12 +++++++++---
>   1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
> index 5b7fa77c1184..eb7b2f864d88 100644
> --- a/drivers/pinctrl/stm32/pinctrl-stm32.c
> +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
> @@ -1738,10 +1738,16 @@ int __maybe_unused stm32_pinctrl_resume(struct device *dev)
>   {
>   	struct stm32_pinctrl *pctl = dev_get_drvdata(dev);
>   	struct stm32_pinctrl_group *g = pctl->groups;
> -	int i;
> +	int i, j, ret;
>   
> -	for (i = 0; i < pctl->nbanks; i++)
> -		clk_enable(pctl->banks[i].clk);
> +	for (i = 0; i < pctl->nbanks; i++) {
> +		ret = clk_enable(pctl->banks[i].clk);
> +		if (ret) {
> +			for (j = 0; j < i; j++)

Instead of this open-coded loop, can you please convert the driver to 
clk_bulk*() API and then do simple clk_bulk_enable()/clk_bulk_disable() 
here and everywhere ?

Thank you