The Vision Mezzanine for the RB3 ships with an imx577 camera sensor.
Enable the IMX577 on the vision mezzanine.

An example media-ctl pipeline for the imx577 is:

media-ctl --reset
media-ctl -v -V '"imx577 '19-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
media-ctl -V '"msm_csiphy3":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
media-ctl -l '"msm_csiphy3":1->"msm_csid0":0[1]'
media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'

yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0

Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/Makefile             |   4 +
 .../qcs6490-rb3gen2-vision-mezzanine.dtso     | 110 ++++++++++++++++++
 2 files changed, 114 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 9bb8b191aeb5..4ee57b3871dd 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -114,6 +114,10 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-shift-otter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
+
+qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2-vision-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
new file mode 100644
index 000000000000..d6085637d0c3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dtso
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/*
+ * Camera Sensor overlay on top of rb3gen2 core kit.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/qcom,camcc-sc7280.h>
+
+/dts-v1/;
+/plugin/;
+
+&camcc {
+	status = "okay";
+};
+
+&camss {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* The port index denotes CSIPHY id i.e. csiphy3 */
+		port@3 {
+			reg = <3>;
+			csiphy3_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&cam2_default>;
+		pinctrl-1 = <&cam2_suspend>;
+
+		clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply  = <&vreg_l18b_1p8>;
+		avdd-supply = <&vph_pwr>;
+		dvdd-supply = <&vph_pwr>;
+
+		port {
+			imx577_ep: endpoint {
+				clock-lanes = <7>;
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy3_ep>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	cam2_default: cam2-default-state {
+		rst-pins {
+			pins = "gpio78";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		mclk-pins {
+			pins = "gpio67";
+			function = "cam_mclk";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	cam2_suspend: cam2-suspend-state {
+		rst-pins {
+			pins = "gpio78";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+			output-low;
+		};
+
+		mclk-pins {
+			pins = "gpio67";
+			function = "cam_mclk";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
-- 
2.25.1

On 4.12.2024 11:00 AM, Vikram Sharma wrote:
> The Vision Mezzanine for the RB3 ships with an imx577 camera sensor.
> Enable the IMX577 on the vision mezzanine.
> 
> An example media-ctl pipeline for the imx577 is:
> 
> media-ctl --reset
> media-ctl -v -V '"imx577 '19-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
> media-ctl -V '"msm_csiphy3":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -l '"msm_csiphy3":1->"msm_csid0":0[1]'
> media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> 
> yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0
> 
> Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---

[...]

> +&camcc {
> +	status = "okay";
> +};

It's already enabled

> +
> +&camss {
> +	vdda-phy-supply = <&vreg_l10c_0p88>;
> +	vdda-pll-supply = <&vreg_l6b_1p2>;
> +	status = "okay";

A newline before status is expected
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* The port index denotes CSIPHY id i.e. csiphy3 */
> +		port@3 {
> +			reg = <3>;
> +			csiphy3_ep: endpoint {

Also between last property and subnode

[...]

> +
> +&tlmm {
> +	cam2_default: cam2-default-state {
> +		rst-pins {
> +			pins = "gpio78";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-disable;
> +		};
> +
> +		mclk-pins {
> +			pins = "gpio67";
> +			function = "cam_mclk";
> +			drive-strength = <2>;
> +			bias-disable;
> +		};

Please sort these by gpio idx

Konrad