QCM2290 is one of the platforms where board-level clocks (XO, sleep)
definitions are split between the SoC dtsi file and the board file.
This is not optimal, as the clocks are a part of the SoC + PMICs design.
Frequencies are common for the whole set of devices using the same SoC.
Remove the split and move frequencies to the SoC DTSI file.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1 +
arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 4 ----
2 files changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index f0746123e594d5ce5cc314c956eaca11556a9211..c653b178f5034d2cb19868b241a4c36459028d57 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -29,6 +29,7 @@ clocks {
xo_board: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
+ clock-frequency = <38400000>;
};
sleep_clk: sleep-clk {
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index 7a789b41c2f1887f0c41ae24da2e2fe8915ab13c..2030e59f8fa162fdd8b66d31dce00bb44aabde5e 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -624,7 +624,3 @@ &wifi {
firmware-name = "qcm2290";
status = "okay";
};
-
-&xo_board {
- clock-frequency = <38400000>;
-};
--
2.39.5