1. Patchew
  2. linux
  3. [PATCH v3 0/4] Add initial support for QCS8300 SoC and QCS8300 RIDE board
  4. View patch

[PATCH v3 2/4] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300

Jingyi Wang posted 4 patches 19 hours ago
[PATCH v3 2/4] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300
Posted by Jingyi Wang 19 hours ago 
Enable clock controller, interconnect and pinctrl for Qualcomm
QCS8300 platform to boot to UART console.

The serial engine depends on gcc, interconnect and pinctrl. Since
the serial console driver is only available as built-in, so these
configs needs be built-in for the UART device to probe and register
the console.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d13218d0c30f..3d9e48940c96 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -608,6 +608,7 @@ CONFIG_PINCTRL_MSM8996=y
 CONFIG_PINCTRL_MSM8998=y
 CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
+CONFIG_PINCTRL_QCS8300=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QDU1000=y
 CONFIG_PINCTRL_SA8775P=y
@@ -1327,6 +1328,7 @@ CONFIG_MSM_MMCC_8998=m
 CONFIG_QCM_GCC_2290=y
 CONFIG_QCM_DISPCC_2290=m
 CONFIG_QCS_GCC_404=y
+CONFIG_QCS_GCC_8300=y
 CONFIG_SC_CAMCC_7280=m
 CONFIG_QDU_GCC_1000=y
 CONFIG_SC_CAMCC_8280XP=m
@@ -1634,6 +1636,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
 CONFIG_INTERCONNECT_QCOM_QCM2290=y
 CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_QCS8300=y
 CONFIG_INTERCONNECT_QCOM_QDU1000=y
 CONFIG_INTERCONNECT_QCOM_SA8775P=y
 CONFIG_INTERCONNECT_QCOM_SC7180=y

-- 
2.25.1
Re: [PATCH v3 2/4] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300
Posted by Dmitry Baryshkov 14 hours ago 
On Thu, Nov 28, 2024 at 04:44:44PM +0800, Jingyi Wang wrote:
> Enable clock controller, interconnect and pinctrl for Qualcomm
> QCS8300 platform to boot to UART console.

... which is used on the ABC DEF board. The defconfig is being enabled
for everybody, so at least let them know which board increases the size
of the default kernel build.

> 
> The serial engine depends on gcc, interconnect and pinctrl. Since
> the serial console driver is only available as built-in, so these
> configs needs be built-in for the UART device to probe and register
> the console.
> 
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
> ---
>  arch/arm64/configs/defconfig | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index d13218d0c30f..3d9e48940c96 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -608,6 +608,7 @@ CONFIG_PINCTRL_MSM8996=y
>  CONFIG_PINCTRL_MSM8998=y
>  CONFIG_PINCTRL_QCM2290=y
>  CONFIG_PINCTRL_QCS404=y
> +CONFIG_PINCTRL_QCS8300=y
>  CONFIG_PINCTRL_QDF2XXX=y
>  CONFIG_PINCTRL_QDU1000=y
>  CONFIG_PINCTRL_SA8775P=y
> @@ -1327,6 +1328,7 @@ CONFIG_MSM_MMCC_8998=m
>  CONFIG_QCM_GCC_2290=y
>  CONFIG_QCM_DISPCC_2290=m
>  CONFIG_QCS_GCC_404=y
> +CONFIG_QCS_GCC_8300=y
>  CONFIG_SC_CAMCC_7280=m
>  CONFIG_QDU_GCC_1000=y
>  CONFIG_SC_CAMCC_8280XP=m
> @@ -1634,6 +1636,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y
>  CONFIG_INTERCONNECT_QCOM_OSM_L3=m
>  CONFIG_INTERCONNECT_QCOM_QCM2290=y
>  CONFIG_INTERCONNECT_QCOM_QCS404=m
> +CONFIG_INTERCONNECT_QCOM_QCS8300=y
>  CONFIG_INTERCONNECT_QCOM_QDU1000=y
>  CONFIG_INTERCONNECT_QCOM_SA8775P=y
>  CONFIG_INTERCONNECT_QCOM_SC7180=y
> 
> -- 
> 2.25.1
> 

-- 
With best wishes
Dmitry
Re: [PATCH v3 2/4] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300
Posted by Jingyi Wang an hour ago 

On 11/28/2024 9:12 PM, Dmitry Baryshkov wrote:
> On Thu, Nov 28, 2024 at 04:44:44PM +0800, Jingyi Wang wrote:
>> Enable clock controller, interconnect and pinctrl for Qualcomm
>> QCS8300 platform to boot to UART console.
> 
> ... which is used on the ABC DEF board. The defconfig is being enabled
> for everybody, so at least let them know which board increases the size
> of the default kernel build.
> 
will add that
>>
>> The serial engine depends on gcc, interconnect and pinctrl. Since
>> the serial console driver is only available as built-in, so these
>> configs needs be built-in for the UART device to probe and register
>> the console.
>>
>> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
>> Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
>> ---
>>  arch/arm64/configs/defconfig | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
>> index d13218d0c30f..3d9e48940c96 100644
>> --- a/arch/arm64/configs/defconfig
>> +++ b/arch/arm64/configs/defconfig
>> @@ -608,6 +608,7 @@ CONFIG_PINCTRL_MSM8996=y
>>  CONFIG_PINCTRL_MSM8998=y
>>  CONFIG_PINCTRL_QCM2290=y
>>  CONFIG_PINCTRL_QCS404=y
>> +CONFIG_PINCTRL_QCS8300=y
>>  CONFIG_PINCTRL_QDF2XXX=y
>>  CONFIG_PINCTRL_QDU1000=y
>>  CONFIG_PINCTRL_SA8775P=y
>> @@ -1327,6 +1328,7 @@ CONFIG_MSM_MMCC_8998=m
>>  CONFIG_QCM_GCC_2290=y
>>  CONFIG_QCM_DISPCC_2290=m
>>  CONFIG_QCS_GCC_404=y
>> +CONFIG_QCS_GCC_8300=y
>>  CONFIG_SC_CAMCC_7280=m
>>  CONFIG_QDU_GCC_1000=y
>>  CONFIG_SC_CAMCC_8280XP=m
>> @@ -1634,6 +1636,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y
>>  CONFIG_INTERCONNECT_QCOM_OSM_L3=m
>>  CONFIG_INTERCONNECT_QCOM_QCM2290=y
>>  CONFIG_INTERCONNECT_QCOM_QCS404=m
>> +CONFIG_INTERCONNECT_QCOM_QCS8300=y
>>  CONFIG_INTERCONNECT_QCOM_QDU1000=y
>>  CONFIG_INTERCONNECT_QCOM_SA8775P=y
>>  CONFIG_INTERCONNECT_QCOM_SC7180=y
>>
>> -- 
>> 2.25.1
>>
> 
Thanks,
Jingyi

Patchew 2.1-devel-b67e4c2

© 2016 - 2024 Red Hat, Inc.