Enable PMIC and PMIC peripherals for qcs8300-ride board. The qcs8
300-ride uses 2 pmics(pmm8620au:0,pmm8650au:1) on the board, which
are variants of pmm8654au used on sa8775p/qcs9100 -ride(4x pmics).

Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 7eed19a694c39dbe791afb6a991db65acb37e597..56e7194521834a7a6f5c5597e0f28a27a18d90d3 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "qcs8300.dtsi"
+#include "sa8775p-pmics.dtsi"
 / {
 	model = "Qualcomm Technologies, Inc. QCS8300 Ride";
 	compatible = "qcom,qcs8300-ride", "qcom,qcs8300";
@@ -223,6 +224,28 @@ &gcc {
 		 <0>;
 };
 
+&pmm8654au_0_pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pmm8654au_2 {
+	status = "disabled";
+};
+
+&pmm8654au_2_thermal {
+	status = "disabled";
+};
+
+&pmm8654au_3 {
+	status = "disabled";
+};
+
+&pmm8654au_3_thermal {
+	status = "disabled";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };

-- 
2.34.1

On 28.11.2024 10:40 AM, Tingguo Cheng wrote:
> Enable PMIC and PMIC peripherals for qcs8300-ride board. The qcs8
> 300-ride uses 2 pmics(pmm8620au:0,pmm8650au:1) on the board, which
> are variants of pmm8654au used on sa8775p/qcs9100 -ride(4x pmics).
> 
> Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> index 7eed19a694c39dbe791afb6a991db65acb37e597..56e7194521834a7a6f5c5597e0f28a27a18d90d3 100644
> --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
> @@ -9,6 +9,7 @@
>  #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>  
>  #include "qcs8300.dtsi"
> +#include "sa8775p-pmics.dtsi"

I don't like this reuse.. and quite frankly I don't think this is
going to scale well, especially if we keep adding more qcs8300-based
boards and will have to weed out 2pmic vs 4pmic specifics

Please create qcs8300-pmics.dtsi

Konrad

On Thu, Nov 28, 2024 at 05:40:17PM +0800, Tingguo Cheng wrote:
> Enable PMIC and PMIC peripherals for qcs8300-ride board. The qcs8
> 300-ride uses 2 pmics(pmm8620au:0,pmm8650au:1) on the board, which
> are variants of pmm8654au used on sa8775p/qcs9100 -ride(4x pmics).
> 
> Signed-off-by: Tingguo Cheng <quic_tingguoc@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry