1. Patchew
  2. linux
  3. [PATCH v2 0/5] Add STM32MP25 PCIe drivers
  4. View patch

[PATCH v2 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings

Christian Bruel posted 5 patches 1 year, 2 months ago
There is a newer version of this series
[PATCH v2 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings
Posted by Christian Bruel 1 year, 2 months ago 
STM32MP25 PCIe Controller is based on the DesignWare core configured as
end point mode from the SYSCFG register.

Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
---
 .../bindings/pci/st,stm32-pcie-ep.yaml        | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml

diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
new file mode 100644
index 000000000000..0da3ee012ba8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,stm32-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 PCIe endpoint driver
+
+maintainers:
+  - Christian Bruel <christian.bruel@foss.st.com>
+
+description:
+  PCIe endpoint controller based on the Synopsys DesignWare PCIe core.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+  - $ref: /schemas/pci/st,stm32-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: st,stm32mp25-pcie-ep
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: addr_space
+
+required:
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+    pcie-ep@48400000 {
+        compatible = "st,stm32mp25-pcie-ep";
+        num-lanes = <1>;
+        reg = <0x48400000 0x400000>,
+              <0x10000000 0x8000000>;
+        reg-names = "dbi", "addr_space";
+        clocks = <&rcc CK_BUS_PCIE>;
+        phys = <&combophy PHY_TYPE_PCIE>;
+        phy-names = "pcie-phy";
+        resets = <&rcc PCIE_R>;
+        pinctrl-names = "default", "init";
+        pinctrl-0 = <&pcie_pins_a>;
+        pinctrl-1 = <&pcie_init_pins_a>;
+        reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+        access-controllers = <&rifsc 68>;
+        power-domains = <&CLUSTER_PD>;
+    };
-- 
2.34.1
Re: [PATCH v2 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings
Posted by Manivannan Sadhasivam 1 year, 2 months ago 
On Tue, Nov 26, 2024 at 04:51:17PM +0100, Christian Bruel wrote:
> STM32MP25 PCIe Controller is based on the DesignWare core configured as
> end point mode from the SYSCFG register.
> 
> Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  .../bindings/pci/st,stm32-pcie-ep.yaml        | 61 +++++++++++++++++++
>  1 file changed, 61 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
> new file mode 100644
> index 000000000000..0da3ee012ba8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/st,stm32-pcie-ep.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STM32MP25 PCIe endpoint driver
> +
> +maintainers:
> +  - Christian Bruel <christian.bruel@foss.st.com>
> +
> +description:
> +  PCIe endpoint controller based on the Synopsys DesignWare PCIe core.
> +
> +allOf:
> +  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
> +  - $ref: /schemas/pci/st,stm32-pcie-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: st,stm32mp25-pcie-ep
> +
> +  reg:
> +    items:
> +      - description: Data Bus Interface (DBI) registers.
> +      - description: PCIe configuration registers.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: addr_space
> +
> +required:
> +  - reset-gpios
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/phy/phy.h>
> +    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
> +
> +    pcie-ep@48400000 {
> +        compatible = "st,stm32mp25-pcie-ep";
> +        num-lanes = <1>;
> +        reg = <0x48400000 0x400000>,
> +              <0x10000000 0x8000000>;
> +        reg-names = "dbi", "addr_space";
> +        clocks = <&rcc CK_BUS_PCIE>;
> +        phys = <&combophy PHY_TYPE_PCIE>;
> +        phy-names = "pcie-phy";
> +        resets = <&rcc PCIE_R>;
> +        pinctrl-names = "default", "init";
> +        pinctrl-0 = <&pcie_pins_a>;
> +        pinctrl-1 = <&pcie_init_pins_a>;
> +        reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
> +        access-controllers = <&rifsc 68>;
> +        power-domains = <&CLUSTER_PD>;
> +    };
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்
Re: [PATCH v2 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings
Posted by Rob Herring (Arm) 1 year, 2 months ago 
On Tue, 26 Nov 2024 16:51:17 +0100, Christian Bruel wrote:
> STM32MP25 PCIe Controller is based on the DesignWare core configured as
> end point mode from the SYSCFG register.
> 
> Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
> ---
>  .../bindings/pci/st,stm32-pcie-ep.yaml        | 61 +++++++++++++++++++
>  1 file changed, 61 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Re: [PATCH v2 3/5] dt-bindings: PCI: Add STM32MP25 PCIe endpoint bindings
Posted by Rob Herring 1 year, 2 months ago 
On Tue, Nov 26, 2024 at 04:51:17PM +0100, Christian Bruel wrote:
> STM32MP25 PCIe Controller is based on the DesignWare core configured as
> end point mode from the SYSCFG register.
> 
> Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
> ---
>  .../bindings/pci/st,stm32-pcie-ep.yaml        | 61 +++++++++++++++++++
>  1 file changed, 61 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
> new file mode 100644
> index 000000000000..0da3ee012ba8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-ep.yaml
> @@ -0,0 +1,61 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/st,stm32-pcie-ep.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STM32MP25 PCIe endpoint driver

Bindings are not a driver. Otherwise,

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.