Add the QCE and Crypto BAM DMA nodes.

Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 2c35f96c3f28..d699706638f0 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -710,6 +710,30 @@ ufs_mem_phy: phy@1d87000 {
 			status = "disabled";
 		};
 
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <20>;
+			qcom,num-ees = <4>;
+			iommus = <&apps_smmu 0x480 0x00>,
+				 <&apps_smmu 0x481 0x00>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,qcs8300-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x480 0x00>,
+				 <&apps_smmu 0x481 0x00>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x20000>;
-- 
2.34.1

On 25.11.2024 12:19 PM, Yuvaraj Ranganathan wrote:
> Add the QCE and Crypto BAM DMA nodes.
> 
> Signed-off-by: Yuvaraj Ranganathan <quic_yrangana@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs8300.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> index 2c35f96c3f28..d699706638f0 100644
> --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> @@ -710,6 +710,30 @@ ufs_mem_phy: phy@1d87000 {
>  			status = "disabled";
>  		};
>  
> +		cryptobam: dma-controller@1dc4000 {
> +			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> +			reg = <0x0 0x01dc4000 0x0 0x28000>;
> +			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			qcom,ee = <0>;
> +			qcom,controlled-remotely;
> +			num-channels = <20>;
> +			qcom,num-ees = <4>;
> +			iommus = <&apps_smmu 0x480 0x00>,
> +				 <&apps_smmu 0x481 0x00>;
> +		};
> +
> +		crypto: crypto@1dfa000 {
> +			compatible = "qcom,qcs8300-qce", "qcom,qce";
> +			reg = <0x0 0x01dfa000 0x0 0x6000>;
> +			dmas = <&cryptobam 4>, <&cryptobam 5>;
> +			dma-names = "rx", "tx";
> +			iommus = <&apps_smmu 0x480 0x00>,
> +				 <&apps_smmu 0x481 0x00>;
> +			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;

Please wrap this line, see other files for an example

Konrad