This series adds the DPTX0 and DPTX1 nodes, as a part of mdss0
on Qualcomm SA8775P SoC. It also enables Display Port on Qualcomm
SA8775P-ride platform.
---
This patch depends on following series:
https://lore.kernel.org/all/20240816-sa8775p-mm-v3-v1-0-77d53c3c0cef@quicinc.com/
https://lore.kernel.org/all/20241019-patchv3_1-v5-0-d2fb72c9a845@quicinc.com/
https://lore.kernel.org/all/20241018070706.28980-1-quic_mukhopad@quicinc.com/
v6: Fixed review comments from Konrad
- Fixed indentation errors in patchset 1.[Konrad]
- Updated the register addresses to 8 hex digits comprising of leading zeroes,
in patchset 1.[Konrad]
- Shifted the 'status' property of nodes to the end at each node definitions
in patchset 2.[Konrad]
v5: Fixed review comments from Dmitry
- Updated the labels of DP connectors 0 and 1 to edp0 and edp1
respectively.[Dmitry]
- Update the commit message for patchset 2 mentioning about the
enablement and validation DP controllers of mdss0.[Dmitry]
v4: Fixed review comments from Dmitry
- Added p1 region to the register set of both mdss_dp0 and mdss_dp1.[Dmitry]
- Validated devicetree against DT schema.[Dmitry]
v3: Fixed review comments from Dmitry and other minor changes to prevent warnings and maintain alignment
- Added specific DP connector node for each DP port validated in patchset 2.[Dmitry]
- Updated the reg value to 1 for port 1 under mdss_mdp in patchset 1.
- Fixed the register address space for mdss0_dp1 and mdss0_dp1_phy in alignment to the
register address space for mdss0_dp0 and mdss0_dp0_phy, in patchset 1.
v2: Fixed review comments from Dmitry, Konrad and Bjorn
- Added a new patchset to separate out the soc and board parts.[Konrad]
- Patchset 1 now comprises of the soc parts and patchset 2 includes board specific changes.[Bjorn]
- Patchset 2 enables all the DP ports validated on the sa8775p-ride platform.[Bjorn]
- Fixed indentation errors in the dtsi file containing the soc information.[Dmitry][Konrad]
- Updated clocks to be used by respective PHYs.[Dmitry]
- Added mdss0_dp1 device node.[Dmitry]
- Updated the names of PHYs using label prefix "mdssM_dpN" for clarity.[Bjorn]
- Avoided use of referring any label in the board(dts) file in the dtsi(platform) file.[Bjorn]
Soutrik Mukhopadhyay (2):
arm64: dts: qcom: sa8775p: add DisplayPort device nodes
arm64: dts: qcom: sa8775p-ride: Enable Display Port
arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 80 ++++++++
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 220 ++++++++++++++++++++-
2 files changed, 299 insertions(+), 1 deletion(-)
--
2.17.1