Add dts nodes to enable ethernet interface on qcs8300-ride.
The EMAC, SerDes and EPHY version are the same as those in sa8775p.
Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
---
This patch series depends on below patch series:
https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@quicinc.com/ - Reviewed
https://lore.kernel.org/all/20241010-schema-v1-0-98b2d0a2f7a2@quicinc.com/ - Applied
Changes in v4:
- Remove the dts split and revision 2 changes, as the 1G PHY version is now obsolete.
- Enable 2.5G PHY in qcs8300-ride.dts.
- Replace spaces with indents as possible.
- Update the subject of the first change.
- Link to v3: https://lore.kernel.org/all/20241118071846.2964333-1-quic_yijiyang@quicinc.com/
---
Yijie Yang (2):
arm64: dts: qcom: qcs8300: add the first 2.5G ethernet
arm64: dts: qcom: qcs8300-ride: enable ethernet0
arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 112 ++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/qcs8300.dtsi | 43 ++++++++++++
2 files changed, 155 insertions(+)
---
base-commit: c83f0b825741bcb9d8a7be67c63f6b9045d30f5a
change-id: 20241111-dts_qcs8300-f8383ef0f5ef
Best regards,
--
Yijie Yang <quic_yijiyang@quicinc.com>