From: Maud Spierings <maud_spierings@hotmail.com>
Add bluetooth for the asus vivobook s15
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
---
.../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index d0bee4b6fc0be6fe40d335f4d50dde495853b315..caf7509692db84c69ad375b5dd07054ac0adcb52 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -18,6 +18,11 @@ / {
compatible = "asus,vivobook-s15", "qcom,x1e80100";
chassis-type = "laptop";
+ aliases {
+ serial0 = &uart21;
+ serial1 = &uart14;
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&hall_int_n_default>;
@@ -545,6 +550,14 @@ &tlmm {
<44 4>, /* SPI (TPM) */
<238 1>; /* UFS Reset */
+ bt_en_default: bt-en-sleep {
+ pins = "gpio116";
+ function = "gpio";
+ output-low;
+ bias-disable;
+ qcom,drive-strength = <16>;
+ };
+
edp_reg_en: edp-reg-en-state {
pins = "gpio70";
function = "gpio";
@@ -624,6 +637,17 @@ tpad_default: tpad-default-state {
};
};
+&uart14 {
+ status = "okay";
+ bluetooth: bt_wcn7850 {
+ compatible = "qcom,wcn7850-bt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_default>;
+ enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+ max-speed = <3200000>;
+ };
+};
+
&usb_1_ss0_hsphy {
vdd-supply = <&vreg_l3j_0p8>;
vdda12-supply = <&vreg_l2j_1p2>;
--
2.47.0
On Sat, Nov 23, 2024 at 01:58:56PM +0100, Maud Spierings via B4 Relay wrote:
> From: Maud Spierings <maud_spierings@hotmail.com>
>
> Add bluetooth for the asus vivobook s15
>
> Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
> ---
> .../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 24 ++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
> index d0bee4b6fc0be6fe40d335f4d50dde495853b315..caf7509692db84c69ad375b5dd07054ac0adcb52 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
> @@ -18,6 +18,11 @@ / {
> compatible = "asus,vivobook-s15", "qcom,x1e80100";
> chassis-type = "laptop";
>
> + aliases {
> + serial0 = &uart21;
> + serial1 = &uart14;
> + };
> +
> gpio-keys {
> compatible = "gpio-keys";
> pinctrl-0 = <&hall_int_n_default>;
> @@ -545,6 +550,14 @@ &tlmm {
> <44 4>, /* SPI (TPM) */
> <238 1>; /* UFS Reset */
>
> + bt_en_default: bt-en-sleep {
> + pins = "gpio116";
> + function = "gpio";
> + output-low;
> + bias-disable;
> + qcom,drive-strength = <16>;
> + };
> +
> edp_reg_en: edp-reg-en-state {
> pins = "gpio70";
> function = "gpio";
> @@ -624,6 +637,17 @@ tpad_default: tpad-default-state {
> };
> };
>
> +&uart14 {
> + status = "okay";
> + bluetooth: bt_wcn7850 {
> + compatible = "qcom,wcn7850-bt";
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_en_default>;
> + enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
> + max-speed = <3200000>;
Please describe the PMU as per the qualcomm-bluetooth.yaml
> + };
> +};
> +
> &usb_1_ss0_hsphy {
> vdd-supply = <&vreg_l3j_0p8>;
> vdda12-supply = <&vreg_l2j_1p2>;
>
> --
> 2.47.0
>
>
--
With best wishes
Dmitry
On Sat, Nov 23, 2024 at 01:58:56PM +0100, Maud Spierings wrote:
> Add bluetooth for the asus vivobook s15
>
> Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
> ---
> .../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 24 ++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
> index d0bee4b6fc0be6fe40d335f4d50dde495853b315..caf7509692db84c69ad375b5dd07054ac0adcb52 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
> @@ -18,6 +18,11 @@ / {
> compatible = "asus,vivobook-s15", "qcom,x1e80100";
> chassis-type = "laptop";
>
> + aliases {
> + serial0 = &uart21;
> + serial1 = &uart14;
> + };
> +
> gpio-keys {
> compatible = "gpio-keys";
> pinctrl-0 = <&hall_int_n_default>;
> @@ -545,6 +550,14 @@ &tlmm {
> <44 4>, /* SPI (TPM) */
> <238 1>; /* UFS Reset */
>
> + bt_en_default: bt-en-sleep {
> + pins = "gpio116";
> + function = "gpio";
> + output-low;
> + bias-disable;
> + qcom,drive-strength = <16>;
Hm? There is no such property for TLMM. Which node is it?
> + };
> +
> edp_reg_en: edp-reg-en-state {
> pins = "gpio70";
> function = "gpio";
> @@ -624,6 +637,17 @@ tpad_default: tpad-default-state {
> };
> };
>
> +&uart14 {
> + status = "okay";
Missing blank line
> + bluetooth: bt_wcn7850 {
Underscores are not allowed in node names.
Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Best regards,
Krzysztof
© 2016 - 2026 Red Hat, Inc.