1. Patchew
  2. linux
  3. View series

[PATCH] brcmfmac: fix RSSI report in AP mode

Alex Shumsky posted 1 patch 1 year ago 
.../wireless/broadcom/brcm80211/brcmfmac/cfg80211.c  | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
[PATCH] brcmfmac: fix RSSI report in AP mode
Posted by Alex Shumsky 1 year ago 
After commit 9a1590934d9a ("brcmfmac: correctly report average RSSI in
station info") it is required from firmware to provide rx_lastpkt_rssi.
If this field is not provided brcmfmac doesn't report any RSSI at all.
Unfortunately some firmwares doesn't provide it. One example is firmware
for BCM43455 found in Raspbberry Pi.
See https://github.com/raspberrypi/linux/issues/4574

Fix it by falling back to rssi field if rx_lastpkt_rssi is not provided
(like it was before 9a1590934d9a).

Fixes: 9a1590934d9a ("brcmfmac: correctly report average RSSI in station info")
Signed-off-by: Alex Shumsky <alexthreed@gmail.com>
---

 .../wireless/broadcom/brcm80211/brcmfmac/cfg80211.c  | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 349aa3439502..8fc10858e936 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -3125,6 +3125,7 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 	s32 total_rssi = 0;
 	s32 count_rssi = 0;
 	int rssi;
+	int rx_lastpkt_rssi;
 	u32 i;
 
 	brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac);
@@ -3190,15 +3191,16 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev,
 			sinfo->rx_bytes = le64_to_cpu(sta_info_le.rx_tot_bytes);
 		}
 		for (i = 0; i < BRCMF_ANT_MAX; i++) {
-			if (sta_info_le.rssi[i] == 0 ||
-			    sta_info_le.rx_lastpkt_rssi[i] == 0)
+			if (sta_info_le.rssi[i] == 0)
 				continue;
+			rx_lastpkt_rssi = sta_info_le.rx_lastpkt_rssi[i] != 0 ?
+				sta_info_le.rx_lastpkt_rssi[i] :
+				sta_info_le.rssi[i];
 			sinfo->chains |= BIT(count_rssi);
-			sinfo->chain_signal[count_rssi] =
-				sta_info_le.rx_lastpkt_rssi[i];
+			sinfo->chain_signal[count_rssi] = rx_lastpkt_rssi;
 			sinfo->chain_signal_avg[count_rssi] =
 				sta_info_le.rssi[i];
-			total_rssi += sta_info_le.rx_lastpkt_rssi[i];
+			total_rssi += rx_lastpkt_rssi;
 			total_rssi_avg += sta_info_le.rssi[i];
 			count_rssi++;
 		}
-- 
2.34.1
Re: [PATCH] brcmfmac: fix RSSI report in AP mode
Posted by Arend van Spriel 1 year ago 
On 11/22/2024 10:03 PM, Alex Shumsky wrote:
> After commit 9a1590934d9a ("brcmfmac: correctly report average RSSI in
> station info") it is required from firmware to provide rx_lastpkt_rssi.
> If this field is not provided brcmfmac doesn't report any RSSI at all.
> Unfortunately some firmwares doesn't provide it. One example is firmware
> for BCM43455 found in Raspbberry Pi.
> See https://github.com/raspberrypi/linux/issues/4574
> 
> Fix it by falling back to rssi field if rx_lastpkt_rssi is not provided
> (like it was before 9a1590934d9a).

Sounds like a reasonable approach. However, I would like to learn more 
about the issue. Maybe it is a per-vendor issue so I am interested what 
the sta_info version is that we get from firmware. It is printed in 
brcmf_cfg80211_get_station() with brcmf_dbg(). You can make it a 
bphy_err() call instead or enable TRACE level debug messages in the driver.

Also would be good to know the firmware version and kernel version of 
the BCM43455.

Regards,
Arend
Re: [PATCH] brcmfmac: fix RSSI report in AP mode
Posted by Alex Shumsky 12 months ago 
On Tue, Nov 26, 2024 at 2:13 PM Arend van Spriel
<arend.vanspriel@broadcom.com> wrote:
>
> On 11/22/2024 10:03 PM, Alex Shumsky wrote:
> > After commit 9a1590934d9a ("brcmfmac: correctly report average RSSI in
> > station info") it is required from firmware to provide rx_lastpkt_rssi.
> > If this field is not provided brcmfmac doesn't report any RSSI at all.
> > Unfortunately some firmwares doesn't provide it. One example is firmware
> > for BCM43455 found in Raspbberry Pi.
> > See https://github.com/raspberrypi/linux/issues/4574
> >
> > Fix it by falling back to rssi field if rx_lastpkt_rssi is not provided
> > (like it was before 9a1590934d9a).
>
> Sounds like a reasonable approach. However, I would like to learn more
> about the issue. Maybe it is a per-vendor issue so I am interested what
> the sta_info version is that we get from firmware. It is printed in
> brcmf_cfg80211_get_station() with brcmf_dbg(). You can make it a
> bphy_err() call instead or enable TRACE level debug messages in the driver.
>
> Also would be good to know the firmware version and kernel version of
> the BCM43455.
>
> Regards,
> Arend

Hi Arend,

Is the info I have provided sufficient?
Re: [PATCH] brcmfmac: fix RSSI report in AP mode
Posted by Arend van Spriel 12 months ago 
On 12/17/2024 7:54 PM, Alex Shumsky wrote:
> On Tue, Nov 26, 2024 at 2:13 PM Arend van Spriel
> <arend.vanspriel@broadcom.com> wrote:
>>
>> On 11/22/2024 10:03 PM, Alex Shumsky wrote:
>>> After commit 9a1590934d9a ("brcmfmac: correctly report average RSSI in
>>> station info") it is required from firmware to provide rx_lastpkt_rssi.
>>> If this field is not provided brcmfmac doesn't report any RSSI at all.
>>> Unfortunately some firmwares doesn't provide it. One example is firmware
>>> for BCM43455 found in Raspbberry Pi.
>>> See https://github.com/raspberrypi/linux/issues/4574
>>>
>>> Fix it by falling back to rssi field if rx_lastpkt_rssi is not provided
>>> (like it was before 9a1590934d9a).
>>
>> Sounds like a reasonable approach. However, I would like to learn more
>> about the issue. Maybe it is a per-vendor issue so I am interested what
>> the sta_info version is that we get from firmware. It is printed in
>> brcmf_cfg80211_get_station() with brcmf_dbg(). You can make it a
>> bphy_err() call instead or enable TRACE level debug messages in the driver.
>>
>> Also would be good to know the firmware version and kernel version of
>> the BCM43455.
>>
>> Regards,
>> Arend
> 
> Hi Arend,
> 
> Is the info I have provided sufficient?

I am missing the kernel version and whether it is upstream kernel or not.

Regards,
Arend
Re: [PATCH] brcmfmac: fix RSSI report in AP mode
Posted by Alex Shumsky 1 year ago 
On Tue, Nov 26, 2024 at 2:13 PM Arend van Spriel
<arend.vanspriel@broadcom.com> wrote:
>
> On 11/22/2024 10:03 PM, Alex Shumsky wrote:
> > After commit 9a1590934d9a ("brcmfmac: correctly report average RSSI in
> > station info") it is required from firmware to provide rx_lastpkt_rssi.
> > If this field is not provided brcmfmac doesn't report any RSSI at all.
> > Unfortunately some firmwares doesn't provide it. One example is firmware
> > for BCM43455 found in Raspbberry Pi.
> > See https://github.com/raspberrypi/linux/issues/4574
> >
> > Fix it by falling back to rssi field if rx_lastpkt_rssi is not provided
> > (like it was before 9a1590934d9a).
>
> Sounds like a reasonable approach. However, I would like to learn more
> about the issue. Maybe it is a per-vendor issue so I am interested what
> the sta_info version is that we get from firmware. It is printed in
> brcmf_cfg80211_get_station() with brcmf_dbg(). You can make it a
> bphy_err() call instead or enable TRACE level debug messages in the driver.
>
> Also would be good to know the firmware version and kernel version of
> the BCM43455.
>
> Regards,
> Arend

I've just checked sta version in trace logs:
brcmf_cfg80211_get_station version 4

Firmware I currently use:
BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID
01-b677b91b
https://github.com/murata-wireless/cyw-fmac-fw/blob/e024d0c0a3ab241f547cb44303de7e1b49f0ca78/cyfmac43455-sdio.bin

I'm not sure what firmware version is used in the raspberry pi distro.
From raspberry forums it looks, like:
Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa
CY) FWID 01-703fd60
Re: [PATCH] brcmfmac: fix RSSI report in AP mode
Posted by KeithG 1 year ago 
From my updated aarch64 RPiOS Bookworm as of today, it is:
Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26
CY) FWID 01-b677b91b

On Mon, Dec 9, 2024 at 3:08 PM Alex Shumsky <alexthreed@gmail.com> wrote:
>
> On Tue, Nov 26, 2024 at 2:13 PM Arend van Spriel
> <arend.vanspriel@broadcom.com> wrote:
> >
> > On 11/22/2024 10:03 PM, Alex Shumsky wrote:
> > > After commit 9a1590934d9a ("brcmfmac: correctly report average RSSI in
> > > station info") it is required from firmware to provide rx_lastpkt_rssi.
> > > If this field is not provided brcmfmac doesn't report any RSSI at all.
> > > Unfortunately some firmwares doesn't provide it. One example is firmware
> > > for BCM43455 found in Raspbberry Pi.
> > > See https://github.com/raspberrypi/linux/issues/4574
> > >
> > > Fix it by falling back to rssi field if rx_lastpkt_rssi is not provided
> > > (like it was before 9a1590934d9a).
> >
> > Sounds like a reasonable approach. However, I would like to learn more
> > about the issue. Maybe it is a per-vendor issue so I am interested what
> > the sta_info version is that we get from firmware. It is printed in
> > brcmf_cfg80211_get_station() with brcmf_dbg(). You can make it a
> > bphy_err() call instead or enable TRACE level debug messages in the driver.
> >
> > Also would be good to know the firmware version and kernel version of
> > the BCM43455.
> >
> > Regards,
> > Arend
>
> I've just checked sta version in trace logs:
> brcmf_cfg80211_get_station version 4
>
> Firmware I currently use:
> BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID
> 01-b677b91b
> https://github.com/murata-wireless/cyw-fmac-fw/blob/e024d0c0a3ab241f547cb44303de7e1b49f0ca78/cyfmac43455-sdio.bin
>
> I'm not sure what firmware version is used in the raspberry pi distro.
> From raspberry forums it looks, like:
> Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa
> CY) FWID 01-703fd60
>
Re: [PATCH] brcmfmac: fix RSSI report in AP mode
Posted by Kalle Valo 1 year ago 
Alex Shumsky <alexthreed@gmail.com> writes:

> After commit 9a1590934d9a ("brcmfmac: correctly report average RSSI in
> station info") it is required from firmware to provide rx_lastpkt_rssi.
> If this field is not provided brcmfmac doesn't report any RSSI at all.
> Unfortunately some firmwares doesn't provide it. One example is firmware
> for BCM43455 found in Raspbberry Pi.
> See https://github.com/raspberrypi/linux/issues/4574
>
> Fix it by falling back to rssi field if rx_lastpkt_rssi is not provided
> (like it was before 9a1590934d9a).
>
> Fixes: 9a1590934d9a ("brcmfmac: correctly report average RSSI in station info")
> Signed-off-by: Alex Shumsky <alexthreed@gmail.com>

'wifi:' missing but I can add it, no need to resend because of this.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

Patchew 2.1-devel-b67e4c2

© 2016 - 2025 Red Hat, Inc.