This is added in preparation for calling standby mode in the tcan4x5x
driver or other users of m_can.
For the tcan4x5x; If Vsup 12V, standby mode will save 7-8mA, when the
interface is down.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
 drivers/net/can/m_can/m_can.c | 7 +++++++
 drivers/net/can/m_can/m_can.h | 1 +
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 16e9e7d7527d9762d73a7ec47940c73c0976e05d..e31ce973892a96f47d26d06464e0f6e2245550fd 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -1756,6 +1756,13 @@ static void m_can_stop(struct net_device *dev)
 
 	/* set the state as STOPPED */
 	cdev->can.state = CAN_STATE_STOPPED;
+
+	if (cdev->ops->deinit) {
+		ret = cdev->ops->deinit(cdev);
+		if (ret)
+			netdev_err(dev, "failed to deinitialize: %pe\n",
+				   ERR_PTR(ret));
+	}
 }
 
 static int m_can_close(struct net_device *dev)
diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
index 92b2bd8628e6b31370f4accbc2e28f3b2257a71d..6206535341a22a68d7c5570f619e6c4d05e6fcf4 100644
--- a/drivers/net/can/m_can/m_can.h
+++ b/drivers/net/can/m_can/m_can.h
@@ -68,6 +68,7 @@ struct m_can_ops {
 	int (*write_fifo)(struct m_can_classdev *cdev, int addr_offset,
 			  const void *val, size_t val_count);
 	int (*init)(struct m_can_classdev *cdev);
+	int (*deinit)(struct m_can_classdev *cdev);
 };
 
 struct m_can_tx_op {

-- 
2.46.2