Add support for primary USB controller and its PHYs on
QCS615.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs615.dtsi | 110 +++++++++++++++++++++++++++
 1 file changed, 110 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index 590beb37f441..d5c14c067ad6 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -397,6 +397,11 @@ qfprom: efuse@780000 {
 			reg = <0x0 0x00780000 0x0 0x7000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@1f8 {
+				reg = <0x1fb 0x1>;
+				bits = <1 4>;
+			};
 		};
 
 		qupv3_id_0: geniqup@8c0000 {
@@ -758,6 +763,111 @@ rpmhpd_opp_turbo_l1: opp-9 {
 				};
 			};
 		};
+
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,qcs615-qusb2-phy";
+			reg = <0x0 0x88e2000 0x0 0x180>;
+
+			clocks = <&gcc GCC_AHB2PHY_WEST_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@88e6000 {
+			compatible = "qcom,qcs615-qmp-usb3-phy";
+			reg = <0x0 0x88e6000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_AHB2PHY_WEST_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			qcom,tcsr-reg = <&tcsr 0xb244>;
+
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,qcs615-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+
+				iommus = <&apps_smmu 0x140 0x0>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+				phys = <&usb_1_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+			};
+		};
 	};
 
 	arch_timer: timer {
-- 
2.34.1

On Thu, Nov 21, 2024 at 12:00:06PM +0530, Krishna Kurapati wrote:
> Add support for primary USB controller and its PHYs on
> QCS615.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs615.dtsi | 110 +++++++++++++++++++++++++++
>  1 file changed, 110 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry