1. Patchew
  2. linux
  3. [PATCH net v4 0/4] Correcting switch hardware versions and reported speeds
  4. View patch

[PATCH net v4 4/4] rtase: Add defines for hardware version id

Justin Lai posted 4 patches 4 days, 5 hours ago
There is a newer version of this series
[PATCH net v4 4/4] rtase: Add defines for hardware version id
Posted by Justin Lai 4 days, 5 hours ago 
Add defines for hardware version id.

Signed-off-by: Justin Lai <justinlai0215@realtek.com>
---
 drivers/net/ethernet/realtek/rtase/rtase.h      |  5 ++++-
 drivers/net/ethernet/realtek/rtase/rtase_main.c | 12 ++++++------
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/realtek/rtase/rtase.h b/drivers/net/ethernet/realtek/rtase/rtase.h
index 547c71937b01..4a4434869b10 100644
--- a/drivers/net/ethernet/realtek/rtase/rtase.h
+++ b/drivers/net/ethernet/realtek/rtase/rtase.h
@@ -9,7 +9,10 @@
 #ifndef RTASE_H
 #define RTASE_H
 
-#define RTASE_HW_VER_MASK 0x7C800000
+#define RTASE_HW_VER_MASK     0x7C800000
+#define RTASE_HW_VER_906X_7XA 0x00800000
+#define RTASE_HW_VER_906X_7XC 0x04000000
+#define RTASE_HW_VER_907XD_V1 0x04800000
 
 #define RTASE_RX_DMA_BURST_256       4
 #define RTASE_TX_DMA_BURST_UNLIMITED 7
diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
index 26331a2b7b2d..1bfe5ef40c52 100644
--- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
+++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
@@ -1720,11 +1720,11 @@ static int rtase_get_settings(struct net_device *dev,
 						supported);
 
 	switch (tp->hw_ver) {
-	case 0x00800000:
-	case 0x04000000:
+	case RTASE_HW_VER_906X_7XA:
+	case RTASE_HW_VER_906X_7XC:
 		cmd->base.speed = SPEED_5000;
 		break;
-	case 0x04800000:
+	case RTASE_HW_VER_907XD_V1:
 		cmd->base.speed = SPEED_10000;
 		break;
 	}
@@ -1990,9 +1990,9 @@ static int rtase_check_mac_version_valid(struct rtase_private *tp)
 	tp->hw_ver = rtase_r32(tp, RTASE_TX_CONFIG_0) & RTASE_HW_VER_MASK;
 
 	switch (tp->hw_ver) {
-	case 0x00800000:
-	case 0x04000000:
-	case 0x04800000:
+	case RTASE_HW_VER_906X_7XA:
+	case RTASE_HW_VER_906X_7XC:
+	case RTASE_HW_VER_907XD_V1:
 		ret = 0;
 		break;
 	}
-- 
2.34.1
Re: [PATCH net v4 4/4] rtase: Add defines for hardware version id
Posted by Michal Kubiak 3 days, 23 hours ago 
On Tue, Nov 19, 2024 at 05:57:06PM +0800, Justin Lai wrote:
> Add defines for hardware version id.
> 
> Signed-off-by: Justin Lai <justinlai0215@realtek.com>
> ---
>  drivers/net/ethernet/realtek/rtase/rtase.h      |  5 ++++-
>  drivers/net/ethernet/realtek/rtase/rtase_main.c | 12 ++++++------
>  2 files changed, 10 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/ethernet/realtek/rtase/rtase.h b/drivers/net/ethernet/realtek/rtase/rtase.h
> index 547c71937b01..4a4434869b10 100644
> --- a/drivers/net/ethernet/realtek/rtase/rtase.h
> +++ b/drivers/net/ethernet/realtek/rtase/rtase.h
> @@ -9,7 +9,10 @@
>  #ifndef RTASE_H
>  #define RTASE_H
>  
> -#define RTASE_HW_VER_MASK 0x7C800000
> +#define RTASE_HW_VER_MASK     0x7C800000
> +#define RTASE_HW_VER_906X_7XA 0x00800000
> +#define RTASE_HW_VER_906X_7XC 0x04000000
> +#define RTASE_HW_VER_907XD_V1 0x04800000
>  
>  #define RTASE_RX_DMA_BURST_256       4
>  #define RTASE_TX_DMA_BURST_UNLIMITED 7
> diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> index 26331a2b7b2d..1bfe5ef40c52 100644
> --- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> @@ -1720,11 +1720,11 @@ static int rtase_get_settings(struct net_device *dev,
>  						supported);
>  
>  	switch (tp->hw_ver) {
> -	case 0x00800000:
> -	case 0x04000000:
> +	case RTASE_HW_VER_906X_7XA:
> +	case RTASE_HW_VER_906X_7XC:
>  		cmd->base.speed = SPEED_5000;
>  		break;
> -	case 0x04800000:
> +	case RTASE_HW_VER_907XD_V1:
>  		cmd->base.speed = SPEED_10000;
>  		break;
>  	}


This is new code added in the patch #2.
I understand that you want to have those preprocessor definitions in a
separate patch, but why does this patch have to be the last one?
If you had included this change before the patch #2, you would be able
to send the final version of the above code (with no intermediate
changes).

Thanks,
Michal
RE: [PATCH net v4 4/4] rtase: Add defines for hardware version id
Posted by Justin Lai 3 days, 8 hours ago 
> 
> On Tue, Nov 19, 2024 at 05:57:06PM +0800, Justin Lai wrote:
> > Add defines for hardware version id.
> >
> > Signed-off-by: Justin Lai <justinlai0215@realtek.com>
> > ---
> >  drivers/net/ethernet/realtek/rtase/rtase.h      |  5 ++++-
> >  drivers/net/ethernet/realtek/rtase/rtase_main.c | 12 ++++++------
> >  2 files changed, 10 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/realtek/rtase/rtase.h
> > b/drivers/net/ethernet/realtek/rtase/rtase.h
> > index 547c71937b01..4a4434869b10 100644
> > --- a/drivers/net/ethernet/realtek/rtase/rtase.h
> > +++ b/drivers/net/ethernet/realtek/rtase/rtase.h
> > @@ -9,7 +9,10 @@
> >  #ifndef RTASE_H
> >  #define RTASE_H
> >
> > -#define RTASE_HW_VER_MASK 0x7C800000
> > +#define RTASE_HW_VER_MASK     0x7C800000
> > +#define RTASE_HW_VER_906X_7XA 0x00800000 #define
> > +RTASE_HW_VER_906X_7XC 0x04000000 #define
> RTASE_HW_VER_907XD_V1
> > +0x04800000
> >
> >  #define RTASE_RX_DMA_BURST_256       4
> >  #define RTASE_TX_DMA_BURST_UNLIMITED 7 diff --git
> > a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > index 26331a2b7b2d..1bfe5ef40c52 100644
> > --- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> > @@ -1720,11 +1720,11 @@ static int rtase_get_settings(struct net_device
> *dev,
> >                                               supported);
> >
> >       switch (tp->hw_ver) {
> > -     case 0x00800000:
> > -     case 0x04000000:
> > +     case RTASE_HW_VER_906X_7XA:
> > +     case RTASE_HW_VER_906X_7XC:
> >               cmd->base.speed = SPEED_5000;
> >               break;
> > -     case 0x04800000:
> > +     case RTASE_HW_VER_907XD_V1:
> >               cmd->base.speed = SPEED_10000;
> >               break;
> >       }
> 
> 
> This is new code added in the patch #2.
> I understand that you want to have those preprocessor definitions in a separate
> patch, but why does this patch have to be the last one?
> If you had included this change before the patch #2, you would be able to send
> the final version of the above code (with no intermediate changes).
> 
> Thanks,
> Michal

Hi Michal,

Thank you for your suggestion. Upon further consideration, I also
agree that the addition of the hardware version ID definitions should
be included before patch #2.

Justin

Patchew 2.1-devel-b67e4c2

© 2016 - 2024 Red Hat, Inc.